Behringer DJX400

تعارف

This instruction manual provides comprehensive guidance for the Behringer DJX400 2-channel DJ Mixer. It covers essential information regarding product setup, operational procedures, maintenance, and troubleshooting. Familiarize yourself with this manual to ensure optimal performance and longevity of your DJX400 mixer.

سامنے والا view of the Behringer DJX400 DJ Mixer, showing its two channels, faders, EQ controls, crossfader, and master section.

سیٹ اپ

Follow these steps to properly set up your DJX400 mixer.

1 پیک کھولنا اور معائنہ

• مکسر کو اس کی پیکیجنگ سے احتیاط سے ہٹا دیں۔
• Inspect the unit for any signs of damage that may have occurred during transit. If damage is found, contact your dealer immediately.
• Ensure all accessories, including the power cable, are present.

2. آڈیو ذرائع کو جوڑنا

The DJX400 features two dual-input stereo channels. Each channel can accept either PHONO (turntable) or LINE (CD player, media player) level signals.

• PHONO Inputs (RCA): Connect turntables to the PHONO inputs. Ensure your turntables have a ground wire connected to the mixer's ground terminal (if available) to reduce hum.
• LINE Inputs (RCA): Connect CD players, media players, or other line-level audio devices to the LINE inputs.
• MIC Input (1/4" TRS): Connect a microphone to the 1/4" TRS input on the front panel.

3. آڈیو آؤٹ پٹس کو جوڑنا

• MASTER Output (RCA): Connect this output to your main PA system or amplifier. This is your primary audio output.
• BOOTH Output (RCA): Connect this output to a monitor speaker system in your DJ booth. This allows you to hear your mix independently of the main output.
• REC Output (RCA): Connect this output to a recording device (e.g., a digital recorder, computer audio interface) to capture your mix.
• HEADPHONE Output (1/4" TRS): Connect your headphones to this jack for monitoring.

4. پاور کنکشن

• یقینی بنائیں کہ مکسر کا پاور سوئچ آف پوزیشن میں ہے۔
• Connect the provided power cable to the mixer's power inlet and then to a suitable AC power outlet.
• Power on your audio sources and amplifiers before turning on the mixer.
• Finally, switch the DJX400 power ON.

آپریٹنگ

This section details the functions of the DJX400's controls and how to operate the mixer.

1 چینل کنٹرولز

Each of the two stereo channels features the following controls:

• ان پٹ سلیکٹ سوئچ: Toggles between PHONO and LINE inputs for the respective channel.
• کنٹرول حاصل کریں: Adjusts the input sensitivity for the channel. Set this so the channel's peak LED occasionally flashes, but does not stay lit.
• 3-Band KILL EQ: Provides -32 dB attenuation for HIGH, MID, and LOW frequencies. Use these to sculpt the sound of each track.
• CHANNEL FADER: انفرادی چینل کے حجم کی سطح کو کنٹرول کرتا ہے۔
• PFL (Pre-Fader Listen) Button: Routes the channel's audio to the headphone output for monitoring before it reaches the main mix.

2. کراسفیڈر

The DJX400 features a super-smooth dual-rail "Ultraglide" crossfader designed for up to 500,000 life cycles.

• صلیب ساز: Blends between Channel 1 and Channel 2. Moving it to the left emphasizes Channel 1, and to the right emphasizes Channel 2.
• CROSSFADER CURVE Control: Adjusts the response curve of the crossfader. A sharp curve is ideal for scratching, while a smooth curve is better for blending.

3. ماسٹر سیکشن

• ماسٹر لیول: Controls the overall output volume of the mixer to the main PA system.
• BOOTH LEVEL: Adjusts the volume of the BOOTH output for your monitor speakers.
• مائیک لیول: Controls the volume of the microphone input.
• XPQ 3D SURROUND: Activates and adjusts the XPQ 3D surround effect, which widens the stereo image and adds transparency to the sound. Turn the knob to increase the effect.

4. Headphone Section

• ہیڈ فون کی سطح: ہیڈ فون آؤٹ پٹ کے والیوم کو ایڈجسٹ کرتا ہے۔
• PFL/MAIN MIX Control: Blends between the PFL (pre-fader listen) signal and the main mix in your headphones.
• SPLIT/STEREO Switch: In SPLIT mode, the PFL signal is sent to one ear and the main mix to the other. In STEREO mode, both signals are mixed in stereo.

5. بی پی ایم کاؤنٹر

The intelligent dual auto-BPM counter displays the beats per minute for both channels, aiding in beatmatching.

• The display shows the BPM for the active channel or the channel selected for PFL.
• Use the BPM display to visually match the tempo of two tracks before crossfading.

دیکھ بھال

Proper maintenance ensures the longevity and reliable operation of your DJX400 mixer.

صفائی

• Always disconnect the mixer from power before cleaning.
• بیرونی سطحوں کو صاف کرنے کے لیے نرم، خشک، لنٹ فری کپڑا استعمال کریں۔
• ضدی گندگی کے لیے، تھوڑا سا ڈیamp ہلکے صابن کے ساتھ کپڑا استعمال کیا جا سکتا ہے، اس کے بعد خشک کپڑا۔
• Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and internal components.
• Keep faders and knobs free from dust and debris. Compressed air can be used carefully to clear dust from crevices.

ذخیرہ

• جب استعمال میں نہ ہو تو، مکسر کو براہ راست سورج کی روشنی اور انتہائی درجہ حرارت سے دور ٹھنڈی، خشک جگہ پر محفوظ کریں۔
• Protect the mixer from dust by covering it with a dust cover.

خرابی کا سراغ لگانا

This section addresses common issues you might encounter with your DJX400 mixer.

وضاحتیں

Key technical specifications for the Behringer DJX400 DJ Mixer:

وارنٹی اور سپورٹ

Behringer مصنوعات کو وشوسنییتا اور کارکردگی کے لیے ڈیزائن کیا گیا ہے۔ وارنٹی کی تفصیلی معلومات اور تکنیکی مدد کے لیے، براہ کرم آفیشل بیہرنگر سے رجوع کریں۔ webسائٹ یا اپنے مقامی مجاز ڈیلر سے رابطہ کریں۔ کسی بھی وارنٹی دعووں کے لیے خریداری کے ثبوت کے طور پر اپنی خریداری کی رسید رکھیں۔

• آن لائن مدد: سرکاری Behringer ملاحظہ کریں website for FAQs, software downloads, and support resources.
• سروس سینٹرز: مرمت اور دیکھ بھال کے لیے مجاز سروس سینٹرز تلاش کریں۔