1. تعارف
This manual provides essential instructions for the installation, maintenance, and proper use of your Wahl Professional 2-Hole Standard Clipper Blade, Model 1006. Designed for professional precision, this replacement blade ensures accurate and sharp performance for various Wahl clippers. Please read this manual thoroughly before use to ensure optimal performance and longevity of your blade.
Image 1: Wahl Professional 2-Hole Standard Clipper Blade, Model 1006.
2 مطابقت
The Wahl Professional 2-Hole Standard Clipper Blade (Model 1006) is compatible with the following Wahl clipper models:
- Wahl Super Taper
- Wahl Super Taper II
- Wahl Icon
- Wahl Pro Basic
- Wahl Sterling 9
Image 2: Various Wahl clipper models compatible with the 2-Hole Standard Clipper Blade.
3. پیکیج کے مشمولات
Your Wahl Professional 2-Hole Standard Clipper Blade package includes:
- 1mm-3mm Standard Clipper Blade
- بلیڈ آئل۔
- بڑھتے ہوئے پیچ
- تنصیب کی ہدایات (یہ دستی)
4. بلیڈ کی تنصیب
Follow these steps to properly install your new clipper blade:
- بجلی بند: Ensure your clipper is turned off and unplugged from the power source before beginning installation.
- پرانے بلیڈ کو ہٹا دیں: Using a screwdriver, carefully loosen and remove the two screws holding the old blade assembly to the clipper housing. Set aside the old blade and screws.
- کلین کلپر: Clean any hair or debris from the clipper's blade area using a brush.
- نئی بلیڈ کی پوزیشن: Place the new Wahl Professional 2-Hole Standard Clipper Blade onto the clipper, aligning the holes in the blade with the screw holes on the clipper. Ensure the small moving blade is correctly seated on the drive lever.
- محفوظ بلیڈ: Insert the screws and tighten them just enough to hold the blade in place, allowing for slight adjustment.
- بلیڈ کو سیدھ کریں: Adjust the blade to ensure the top blade (cutter) is perfectly aligned with the bottom blade (comb), with the teeth of the top blade slightly behind the teeth of the bottom blade. This prevents cutting the skin.
- حتمی سختی: Once aligned, firmly tighten both screws. Do not overtighten.
- چکنا: Apply a few drops of Wahl clipper oil to the teeth of the new blade.
تصویر 3: تفصیلی view of the 2-Hole Standard Clipper Blade, highlighting its design and dimensions.
5 دیکھ بھال
Proper maintenance is crucial for extending the life and performance of your clipper blade.
5.1 بلیڈ کو تیل لگانا
Regular oiling reduces friction, prevents rusting, and ensures smooth cutting performance. Wahl's high-carbon blades benefit significantly from consistent lubrication.
- تیل لگائیں: With the clipper turned off, apply a drop of Wahl clipper oil to each corner of the top blade and one drop to the foot of the blade.
- Distribute Oil: Turn the clipper on for a few seconds to allow the oil to work its way into the blades.
- ضرورت سے زیادہ مسح کریں: کسی بھی اضافی تیل کو صاف کپڑے سے صاف کریں۔
It is recommended to oil your blades before or after each use, especially if the clipper feels sluggish or pulls hair.
Video 1: Demonstrates how to oil clipper blades to prevent pulling and ensure smooth operation.
5.2 بلیڈ کی صفائی
After each use, brush off any loose hair from the blades. For a deeper clean, especially after prolonged use or if hair buildup is noticeable:
- بالوں کو برش کریں: Use a small cleaning brush to remove hair from between the blade teeth.
- Disinfect (Optional): For professional use, consider using a clipper disinfectant spray (e.g., Wahl Clini-Clip Spray) to sanitize the blades. Follow the product's instructions.
- دوبارہ تیل: Always re-oil the blades after cleaning or disinfecting to prevent rust and maintain lubrication.
Image 4: Essential maintenance products for Wahl clippers, including blade oil and disinfectant spray.
6 خرابیوں کا سراغ لگانا
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| Clipper pulls or snags hair | بلیڈ پھیکے، گندے، یا ٹھیک طرح سے تیل نہیں لگائے گئے ہیں۔ | Clean and oil the blades. If the problem persists, the blades may need sharpening or replacement. |
| Blades are rusting | Insufficient oiling or exposure to moisture. | Ensure blades are thoroughly dried after cleaning and regularly oiled, especially in humid environments. |
| بلیڈ مؤثر طریقے سے نہیں کاٹ رہا ہے۔ | Improper blade alignment or worn blades. | Check blade alignment as per installation instructions. If blades are old, consider replacing them. |
7. وضاحتیں
- پروڈکٹ کا نام: 2-Hole Standard Clipper Blade
- ماڈل نمبر: 1006
- برانڈ: واہل پروفیشنل
- کاٹنے کی لمبائی: 1mm-3mm (Standard)
- مواد: ہائی کاربن اسٹیل
- طول و عرض: 2 x 0.1 x 3 انچ
- آئٹم کا وزن: 0.8 اونس
- UPC: 785085010068، 043917100609
- مینوفیکچرر: واہل پروفیشنل
- اصل: امریکہ میں بنایا گیا ہے۔
8. وارنٹی اور سپورٹ
For warranty information, product support, or to purchase additional accessories, please visit the official Wahl Professional webسائٹ یا ان کی کسٹمر سروس سے رابطہ کریں۔ کسی بھی وارنٹی دعووں کے لیے خریداری کے ثبوت کے طور پر اپنی خریداری کی رسید رکھیں۔
واہل پروفیشنل Webسائٹ: www.wahlpro.com