Codelocks CL1005

Codelocks CL1005 Standard Vertical Cabinet Lock User Manual

ماڈل: CL1005

تعارف

Thank you for choosing the Codelocks CL1005 Standard Vertical Cabinet Lock. This keyless digital lock provides secure access for cabinets and lockers. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your lock.

Codelocks CL1005 Standard Vertical Cabinet Lock

Image: Codelocks CL1005 Standard Vertical Cabinet Lock. This image displays the front view of the CL1005 lock, showing the keypad and the main body.

سیٹ اپ اور انسٹالیشن

The CL1005 lock is designed for easy installation and can serve as a quick retrofit for existing cam locks or for new installations on units without a lock. It fits doors up to 1/2 inch (12.7 mm) thick and features a 5/8 inch (15.8 mm) threaded barrel.

پیکیج کا مواد:

  • CL1005 Lock Body
  • بڑھتے ہوئے بولٹ۔
  • تنصیب کا سانچہ۔
  • 2 ایکس اے اے اے بیٹریاں
  • Cam (pre-installed or separate)

تنصیب کے مراحل:

  1. دروازہ تیار کریں: Use the provided template to mark and drill the necessary holes on the cabinet door. Ensure the door thickness does not exceed 1/2 inch (12.7 mm).
  2. Insert Lock Body: Insert the threaded barrel of the lock body through the prepared hole from the front of the cabinet door.
  3. Secure Lock Body: From the inside of the cabinet, place the mounting plate over the threaded barrel and secure it with the provided nut. Tighten firmly.
  4. Install Cam: Attach the appropriate cam to the back of the lock mechanism using the provided screw. Ensure the cam rotates freely and engages with the cabinet frame when locked.
  5. بیٹریاں انسٹال کریں: Open the battery compartment cover on the back of the lock. Insert the 2 x AAA batteries, observing the correct polarity (+/-). Close the cover securely.
  6. ٹیسٹ آپریشن: Before closing the cabinet, test the lock with the default code (refer to the operating instructions for default code and programming).

آپریٹنگ ہدایات

The CL1005 lock operates using a user-programmable code. It is powered by 2 x AAA batteries, providing approximately 15,000 openings.

Opening the Lock:

  1. اپنا 4-6 ہندسوں کا صارف کوڈ درج کریں۔
  2. The lock will emit a confirmation tone and the LED will flash green.
  3. Turn the knob to the unlocked position.
  4. کابینہ کا دروازہ کھولو۔

بند کرنا اور تالا لگانا:

  1. کابینہ کا دروازہ بند کریں۔
  2. Turn the knob to the locked position. The lock will automatically engage.

Changing the User Code:

Refer to the specific programming instructions provided with your lock for detailed steps on changing the user code and master code. Generally, this involves entering a programming sequence followed by the new code.

Battery Failure Override:

In case of battery failure, the lock can be temporarily powered using a 9V battery. Locate the two contact points (LEDs) on the front of the lock. Apply the 9V battery across these points (positive to positive, negative to negative). While holding the 9V battery in place, enter the Master Code to open the lock. Replace the internal AAA batteries immediately after gaining access.

دیکھ بھال

بیٹری کی تبدیلی:

When the batteries are low, the lock may emit a warning signal (e.g., multiple beeps or a red LED flash) upon code entry. Replace the 2 x AAA batteries promptly to ensure continuous operation. Always use high-quality alkaline batteries.

  1. Open the battery compartment cover on the back of the lock.
  2. پرانی بیٹریاں ہٹا دیں۔
  3. Insert new 2 x AAA batteries, ensuring correct polarity.
  4. بیٹری کے کمپارٹمنٹ کور کو محفوظ طریقے سے بند کریں۔

صفائی:

تالے کے بیرونی حصے کو نرم سے صاف کریں۔amp کپڑا کھرچنے والے کلینر، سالوینٹس یا سخت کیمیکل استعمال کرنے سے گریز کریں، کیونکہ یہ فنش اور الیکٹرانک اجزاء کو نقصان پہنچا سکتے ہیں۔

خرابی کا سراغ لگانا

مسئلہممکنہ وجہحل
Lock does not respond to code entry.
  • غلط کوڈ درج کیا گیا ہے۔
  • مردہ یا کم بیٹریاں۔
  • کی پیڈ کی خرابی۔
  • Ensure the correct code is entered.
  • Replace batteries (refer to Maintenance section).
  • Use 9V battery override if necessary.
  • اگر مسئلہ برقرار رہتا ہے تو کسٹمر سپورٹ سے رابطہ کریں۔
Lock opens but does not stay locked.
  • Cam not properly aligned or installed.
  • Obstruction preventing cam engagement.
  • Check cam installation and alignment.
  • Ensure no objects are blocking the cam's movement.
Lock emits warning beeps/flashes.کم بیٹری پاور۔Replace the 2 x AAA batteries immediately.

وضاحتیں

  • ماڈل: سی ایل 1005
  • برانڈ: Codelocks
  • تالا کی قسم: Keypad, Keyless
  • خصوصی خصوصیت: بغیر چابی کے اندراج
  • طاقت: 2 x AAA بیٹریاں (سپلائی شدہ)
  • بیٹری کی زندگی: Approximately 15,000 openings
  • دروازے کی موٹائی: 1/2 انچ (12.7 ملی میٹر) تک
  • بیرل سائز: 5/8 inch (15.8 mm) threaded
  • طول و عرض (L x W x H): 6 x 2.5 x 1.5 انچ (152 x 63.5 x 38.1 ملی میٹر)
  • وزن: 16 اونس (0.45 کلوگرام)
  • ختم: Silver Grey (Painted)
  • کنٹرول کا طریقہ: چھوئے۔
  • انداز: جدید

وارنٹی اور سپورٹ

For warranty information, technical support, or further assistance with your Codelocks CL1005, please refer to the official Codelocks webسائٹ یا ان کے کسٹمر سروس ڈیپارٹمنٹ سے رابطہ کریں۔ خریداری کے ثبوت کے طور پر اپنی خریداری کی رسید اپنے پاس رکھیں۔

Codelocks Official Webسائٹ: www.codelocks.com

© 2023 Codelocks. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.