Perel E305DIN1 DIN Rail Week Timer Instruction Manual

1. تعارف

This manual provides detailed instructions for the installation, operation, and maintenance of your Perel E305DIN1 DIN Rail Week Timer. Please read this manual thoroughly before using the device to ensure proper function and safety. The Perel E305DIN1 is designed for precise daily and weekly control of electrical circuits.

2 خصوصیات

The Perel E305DIN1 DIN Rail Week Timer offers a range of functionalities for efficient time management of electrical devices:

• Daily and Weekly Programming: Allows for flexible scheduling across days and weeks.
• 8 ON/OFF Program Locations: Configure up to 8 distinct ON and OFF switching times.
• LCD ڈسپلے: Clear display of time, day of the week, and current operating status.
• NiMH Backup Battery: Integrated battery provides up to 200 hours of autonomy after a full charge, preserving settings during power outages
• 3-Way Manual Override: Easily switch between ON, OFF, and AUTO modes manually.
• ماؤنٹنگ کے اختیارات: Designed for DIN rail mounting or wall mounting using the included bracket.
• شفاف حفاظتی کور: Provides protection for the display and controls.

3. سیٹ اپ اور انسٹالیشن

انتباہ: Installation should only be performed by a qualified electrician. Ensure the main power supply is disconnected before commencing installation.

3.1 چڑھنا

The E305DIN1 timer can be mounted in two ways:

• DIN ریل کی چڑھائی: Snap the timer onto a standard 35mm DIN rail within an electrical enclosure.
• دیوار چڑھانا: Use the provided bracket to secure the timer to a wall. Ensure the mounting surface is stable and capable of supporting the device.

3.2 الیکٹریکل کنکشن

Refer to the wiring diagram provided with the device for specific connection points. General steps include:

1. Connect the main power supply (220-250VAC, 50Hz) to the designated input terminals.
2. Connect the load (device to be controlled) to the output terminals. Ensure the load's specifications do not exceed the timer's maximum output capacity (16A resistive, 8A inductive).
3. پاور بحال کرنے سے پہلے تمام کنکشنز کو سختی اور درستگی کے لیے دو بار چیک کریں۔

Image: Perel E305DIN1 DIN Rail Week Timer. This image shows the front view of the timer, highlighting its LCD display, control buttons, and transparent protective cover.

4. آپریٹنگ ہدایات

After installation and power-up, the timer's internal battery will charge. Allow sufficient time for the battery to charge for optimal backup functionality.

4.1 موجودہ وقت اور دن کی ترتیب

1. دبائیں گھڑی بٹن
2. منعقد کرتے ہوئے گھڑی، دبائیں دن ہفتے کا موجودہ دن سیٹ کرنے کے لیے بٹن۔
3. منعقد کرتے ہوئے گھڑی، دبائیں گھنٹہ موجودہ گھنٹہ سیٹ کرنے کے لیے بٹن۔
4. منعقد کرتے ہوئے گھڑی، دبائیں منٹ موجودہ منٹ سیٹ کرنے کے لیے بٹن۔

4.2 پروگرامنگ آن/آف اوقات

The timer allows for up to 8 ON/OFF program pairs.

1. دبائیں پروگ button once to enter program mode. The display will show '1 ON'.
2. استعمال کریں۔ دن, گھنٹہ، اور منٹ buttons to set the desired ON time for program 1.
3. دبائیں پروگ again. The display will show '1 OFF'.
4. استعمال کریں۔ دن, گھنٹہ، اور منٹ buttons to set the desired OFF time for program 1.
5. Repeat steps 1-4 for programs 2 through 8.
6. دبائیں گھڑی button to exit program mode and return to normal operation.

4.3 Manual Override Function

The manual override function allows you to temporarily change the timer's output state without affecting programmed settings.

• دبائیں دستی طریقوں کے ذریعے سائیکل کرنے کے لیے بٹن:
• آن: The output is continuously ON, overriding any programmed OFF times.
• بند: The output is continuously OFF, overriding any programmed ON times.
• آٹو: The timer operates according to the programmed ON/OFF schedules.

5 دیکھ بھال

The Perel E305DIN1 timer requires minimal maintenance.

• صفائی: ایک نرم، خشک کپڑے کے ساتھ بیرونی مسح کریں. کھرچنے والے کلینر یا سالوینٹس کا استعمال نہ کریں۔
• بیٹری بیک اپ: The internal NiMH battery is designed for long life. If the timer frequently loses its settings during power outages, the battery may need replacement by a qualified technician.
• ماحولیاتی حالات: Ensure the timer operates within its specified temperature range (-10°C to 40°C) and avoid excessive humidity or direct sunlight.

6 خرابیوں کا سراغ لگانا

If you encounter issues with your Perel E305DIN1 timer, refer to the following common problems and solutions:

• Timer not turning ON/OFF as programmed:
  • Check if the timer is in آٹو mode. If it's in ON or OFF manual override, it will ignore programs.
  • Verify that the programmed ON/OFF times are correctly set and correspond to the current day.
  • Ensure the current time and day are accurately set on the timer.
• ڈسپلے خالی یا ٹمٹماہٹ ہے:
  • Check the main power supply to the timer.
  • If power is present, the internal backup battery might be completely discharged. Allow the timer to be powered for several hours to recharge the battery.
• پاور OU کے بعد ٹائمر سیٹنگ کھو دیتا ہے۔tage:
  • The internal NiMH backup battery may not be fully charged or may be at the end of its lifespan. Ensure the timer is continuously powered for at least 24 hours to fully charge the battery. If the issue persists, the battery may need replacement.
• Time drift (timer becomes inaccurate over time):
  • The timer has a specified accuracy of ±1 minute per month. Minor adjustments may be necessary periodically. If the drift is significantly higher, contact support.

اگر ان اقدامات سے مسئلہ حل نہیں ہوتا ہے، تو براہ کرم کسٹمر سپورٹ سے رابطہ کریں۔

7. وضاحتیں

Below are the technical specifications for the Perel E305DIN1 DIN Rail Week Timer:

8. وارنٹی اور سپورٹ

This Perel product is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the Perel customer service department.

اپنی خریداری کی رسید کو وارنٹی مقاصد کے لیے خریداری کے ثبوت کے طور پر رکھیں۔