Globe Electric Heath Zenith HZ-4133-SV Motion Sensing Security Light User Manual

1. تعارف

This manual provides detailed instructions for the installation, operation, and maintenance of your Globe Electric Heath Zenith HZ-4133-SV Motion Sensing Security Light. This outdoor wall-mounted fixture is designed to provide enhanced security and convenience with its integrated motion sensor. Please read these instructions carefully before installation and retain them for future reference.

Image 1.1: The Globe Electric Heath Zenith HZ-4133-SV Motion Sensing Security Light in silver finish.

2. حفاظتی معلومات

انتباہ: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing. All wiring connections must be in accordance with local electrical codes. If you are unsure about wiring, consult a qualified electrician.

• Do not install this fixture on a dimmer switch.
• یقینی بنائیں کہ بجلی کی فراہمی 120V AC، 60Hz ہے۔
• Use only incandescent bulbs as specified. Do not exceed the maximum wattage.
• This product is intended for outdoor use and is weather resistant.
• Keep the motion sensor clear of obstructions to ensure proper function.

3. پیکیج کے مشمولات

تنصیب شروع کرنے سے پہلے تصدیق کریں کہ تمام اجزاء موجود ہیں:

• 1 x Motion Sensing Security Light Fixture (Model HZ-4133-SV)
• 1 ایکس ماؤنٹنگ ہارڈ ویئر کٹ (اسکرو، تار گری دار میوے)
• 1 ایکس صارف دستی

نوٹ: One 60-watt max medium base incandescent bulb is شامل نہیں اور الگ سے خریدنا ضروری ہے۔

4. وضاحتیں

Image 4.1: Detailed dimensions of the HZ-4133-SV security light.

5. تنصیب (سیٹ اپ)

شروع کرنے سے پہلے: Ensure the power to the electrical box is turned OFF at the circuit breaker or fuse box. Failure to do so may result in serious injury or death.

1. وائرنگ تیار کریں: Carefully pull the electrical wires from the wall junction box.
2. بڑھتے ہوئے بریکٹ: Attach the mounting bracket (if not pre-attached to the fixture) to the junction box using the provided screws. Ensure it is securely fastened.
3. وائر کنکشن: Connect the fixture's wires to your household wiring using the provided wire nuts. Match the wires as follows:
   • Black (Hot) to Black (Hot)
   • سفید (غیر جانبدار) سے سفید (غیر جانبدار)
   • سبز یا ننگا تانبا (زمین) سے سبز یا ننگا تانبا (زمین)
   یقینی بنائیں کہ تمام کنکشن سخت اور محفوظ ہیں۔
4. ماؤنٹ فکسچر: Carefully tuck the connected wires into the junction box. Align the fixture with the mounting bracket and secure it using the provided screws. Ensure the fixture is flush against the wall and sealed to prevent water entry.
5. بلب انسٹال کریں: Unscrew the bottom of the lantern or open the access panel (depending on design) and carefully screw in one 60-watt max medium base (E26) incandescent bulb. Do not overtighten.
6. بجلی کی بحالی: سرکٹ بریکر پر پاور کو دوبارہ آن کریں۔

6. آپریشن

Your motion sensing security light is designed to automatically turn on when motion is detected within its range and turn off after a set period.

• حرکت کا پتہ لگانا: The sensor detects motion up to 30 feet away within a 150-degree field of view. For optimal performance, ensure the sensor is not obstructed and is aimed towards the desired detection area.
• حساسیت کو ایڈجسٹ کرنا: The motion sensor typically has an adjustment dial (often located on the underside of the sensor head) to control sensitivity. Turn the dial to adjust how easily the sensor triggers. Lower sensitivity may be required in high-traffic areas to prevent false triggers.
• وقت کی ایڈجسٹمنٹ: A separate dial or switch usually controls how long the light stays on after motion is detected. Common settings include 1, 5, or 10 minutes. Adjust this to your preference.
• دستی اوور رائڈ: This fixture includes a manual override feature. To keep the light on continuously, quickly flip your wall switch OFF and then ON within 2 seconds. The light will remain on until you flip the switch OFF and then ON again, returning it to motion-sensing mode.

7 دیکھ بھال

• صفائی: فکسچر کو وقتا فوقتا نرم سے صاف کریں، ڈیamp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or glass. Ensure the sensor lens is clean for proper operation.
• بلب کی تبدیلی: Disconnect power at the circuit breaker before replacing the bulb. Allow the bulb to cool completely. Unscrew the old bulb and replace it with a new 60-watt max medium base (E26) incandescent bulb.
• موسم کی مزاحمت: While weather resistant, regular inspection for any signs of wear or damage to seals can help prolong the life of the fixture.

8 خرابیوں کا سراغ لگانا

9. وارنٹی اور سپورٹ

This Globe Electric Heath Zenith HZ-4133-SV Motion Sensing Security Light comes with a 2 سال کی محدود وارنٹی خریداری کی تاریخ سے. یہ وارنٹی عام استعمال کے تحت مواد اور کاریگری میں نقائص کا احاطہ کرتی ہے۔

For warranty claims, technical support, or replacement parts, please contact Globe Electric customer service. Keep your proof of purchase for warranty validation.

رابطہ کی معلومات:

• Refer to the Globe Electric official webحالیہ رابطے کی تفصیلات کے لیے سائٹ۔
• آن لائن امدادی وسائل بھی دستیاب ہو سکتے ہیں۔