ULINE B004SIPL18

Uline Comfort-Grip Knife User Manual

Model: B004SIPL18 | Brand: ULINE

تعارف

This manual provides essential instructions for the safe and effective use, maintenance, and troubleshooting of your Uline Comfort-Grip Knife. Please read this manual thoroughly before operating the knife and retain it for future reference.

حفاظتی معلومات

WARNING: Blades are extremely sharp. Handle with extreme care. Always retract the blade when not in use. Keep out of reach of children.

Always wear appropriate personal protective equipment, such as cut-resistant gloves and eye protection, when handling or replacing blades.

اجزاء

The Uline Comfort-Grip Knife consists of the following main components:

  • ہینڈل: آرام دہ اور پرسکون گرفت کے لئے Ergonomically ڈیزائن کیا گیا ہے.
  • Blade Retraction Button: Used to extend and retract the blade.
  • بلیڈ: Replaceable carbon steel utility blade.
  • Blade Release Mechanism: Allows for quick blade changes.
Uline Comfort-Grip Knife showing handle, blade, and retraction button
شکل 1: ختمview of the Uline Comfort-Grip Knife. This image displays the blue handle with the orange ULINE logo, the silver blade housing, and the exposed black utility blade. The blade retraction button is visible on top of the handle.

سیٹ اپ

Blade Installation (Initial Setup)

Your Uline Comfort-Grip Knife comes with one blade pre-installed or included separately. If the blade is not installed, follow these steps:

  1. Locate the blade release mechanism, typically a button or lever near the front of the knife.
  2. Press and hold the blade release mechanism.
  3. Carefully insert a new utility blade into the blade slot until it clicks into place. Ensure the blade is oriented correctly with the sharp edge facing forward.
  4. Release the blade release mechanism. Gently pull on the blade to ensure it is securely locked.

نوٹ: Always ensure the blade is fully seated and locked before use to prevent accidental dislodgement.

آپریٹنگ ہدایات

بلیڈ کو بڑھانا اور پیچھے ہٹانا

The Uline Comfort-Grip Knife features a retractable blade with three positions for versatility and safety.

  1. To extend the blade, locate the textured thumb slide button on the top of the handle.
  2. Push the thumb slide button forward until the blade extends to your desired cutting depth. The knife has three distinct blade positions.
  3. To retract the blade, pull the thumb slide button backward until the blade is fully enclosed within the handle.

اہم: Always retract the blade fully when the knife is not in active use or when storing it.

تراکیب کاٹنے

بہترین کارکردگی اور حفاظت کے لیے:

  • ہمیشہ اپنے جسم سے کاٹ دو۔
  • Use a cutting mat or a sacrificial surface underneath the material being cut.
  • Apply firm, even pressure. Do not force the blade.
  • For thicker materials, make multiple shallow passes rather than one deep cut.

دیکھ بھال

بلیڈ کی تبدیلی

Dull blades are dangerous and can lead to accidents. Replace the blade as soon as it shows signs of dullness or damage.

  1. Ensure the blade is fully retracted.
  2. Locate and press the blade release mechanism.
  3. Carefully slide the old blade out. Dispose of used blades safely in a designated blade disposal container or wrapped securely to prevent injury.
  4. Insert a new Uline replacement blade (available separately) into the slot until it locks into place.
  5. Release the blade release mechanism and verify the new blade is secure.

صفائی اور اسٹوریج

Keep your knife clean and dry to ensure longevity and proper function.

  • Wipe the knife clean with a dry cloth after each use.
  • Do not immerse the knife in water or cleaning solutions.
  • Store the knife in a dry place with the blade fully retracted, away from moisture and extreme temperatures.

خرابی کا سراغ لگانا

مسئلہممکنہ وجہحل
Blade does not extend or retract smoothly.Debris in the blade channel; mechanism obstruction.Clean the blade channel of any debris. Ensure the blade is not bent or damaged.
Blade feels loose or wobbly.Blade not fully seated; worn blade release mechanism.Ensure the blade is correctly installed and locked. If the issue persists, the knife may need replacement.
Knife not cutting effectively.پھیکا یا خراب بلیڈ۔Replace the blade with a new, sharp Uline replacement blade.

وضاحتیں

  • ماڈل: B004SIPL18
  • برانڈ: یو لائن
  • Handle Dimensions (L x H x D): 6 x 1.3 x 0.8 انچ
  • Blade Dimensions (L x H): 2.4 x 0.74 انچ
  • بلیڈ کی موٹائی: 0.6 ملی میٹر
  • ہینڈل مواد: Zinc / Rubber
  • بلیڈ مواد: کاربن اسٹیل
  • ہینڈل کی قسم: دستی - واپس لینے کے قابل
  • آئٹم کا وزن: 4.8 اونس
  • تاریخ پہلی دستیابی: 17 مارچ 2011

وارنٹی کی معلومات

ULINE products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty information provided at the time of purchase or visit the official ULINE website. Typically, products are covered against defects in materials and workmanship under normal use.

کسٹمر سپورٹ

If you have any questions, require assistance, or need to order replacement parts (such as blades), please contact ULINE customer support:

  • Webسائٹ: www.uline.com۔
  • فون: Please refer to the ULINE webعلاقائی رابطہ نمبروں کے لیے سائٹ۔

When contacting support, please have your product model number (B004SIPL18) and purchase details ready.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.