PeakTech P 6145 Digital Double Laboratory Power Supply

1. تعارف

The PeakTech P 6145 is a high-quality, stabilized digital double laboratory power supply designed for various applications requiring precise and reliable DC voltage and current. It features two independent, linearly adjustable outputs (0-30V / 0-5A DC) and an additional fixed 5V / 3A output. This manual provides essential information for the safe and efficient operation of your device.

تصویر 1.1: سامنے view of the PeakTech P 6145 Digital Double Laboratory Power Supply, showing the dual digital displays for voltage and current, and control knobs for each channel.

2. حفاظتی ہدایات

Before operating the device, please read and understand all safety instructions. Failure to comply may result in injury or damage to the equipment.

• یقینی بنائیں کہ پاور سپلائی گراؤنڈ آؤٹ لیٹ سے منسلک ہے۔
• آلے کو گیلے یا ڈی میں نہ چلائیں۔amp حالات
• زیادہ گرمی سے بچنے کے لیے وینٹیلیشن کے سوراخوں کو روکنے سے گریز کریں۔
• ڈیوائس کو کھولنے یا مرمت کرنے کی کوشش نہ کریں۔ تمام خدمات کو اہل اہلکاروں سے رجوع کریں۔
• The device is equipped with overload and short-circuit protection. However, always ensure proper load connections.
• Safety standards: EN-61010-1 and safety transformer according to EN-61558-2-6.

3. سیٹ اپ

Follow these steps to set up your PeakTech P 6145 power supply:

1. پیک کھولنا: Carefully remove the power supply from its packaging and inspect it for any signs of damage. Retain the packaging for future transport or storage.
2. جگہ کا تعین: Place the unit on a stable, level surface. Ensure adequate ventilation around the device, leaving at least 10 cm of space on all sides, especially around the rear fan.
3. پاور کنکشن: Connect the provided power cord to the AC input socket on the rear panel of the power supply and then to a suitable grounded mains outlet. Ensure the mains voltage matches the rating specified on the device.
4. ابتدائی جانچ: Before connecting any load, ensure all control knobs are set to their minimum positions.

تصویر 3.1: پیچھے view of the PeakTech P 6145, showing the power input, fan, and ventilation grilles.

4. آپریٹنگ ہدایات

The PeakTech P 6145 offers flexible operation with its dual adjustable outputs and a fixed output.

4.1 فرنٹ پینل اوورview

• ڈیجیٹل ڈسپلے: Two sets of displays show the output voltage (V) and current (A) for the Master and Slave channels.
• والیومtage Adjustment Knobs: Fine and coarse adjustment for output voltage on each channel.
• Current Adjustment Knobs: Fine and coarse adjustment for output current limit on each channel.
• آؤٹ پٹ ٹرمینلز: 4mm safety sockets for Master (0-30V/0-5A), Slave (0-30V/0-5A), and Fixed (5V/3A) outputs.
• Mode Selection Switches: For Master/Slave operation (Normal, Series, Parallel).
• آؤٹ پٹ آن/آف بٹن: Toggles the output for the adjustable channels. The fixed 5V/3A output is always active.
• بجلی کے سوئچ: یونٹ کے لیے مین پاور سوئچ۔

4.2 Basic Operation (Independent Mode)

1. Ensure the Master/Slave mode switch is set to نارمل.
2. Turn on the power supply using the main power switch.
3. والیوم کو ایڈجسٹ کریں۔tage and current limit for the Master channel using its respective knobs. The displays will show the set values.
4. Repeat for the Slave channel.
5. Connect your load to the appropriate 4mm safety output terminals.
6. دبائیں آؤٹ پٹ آن/آف۔ button to enable the output. The displays will now show the actual voltage and current delivered to the load.
7. For the fixed 5V/3A output, simply connect your load to its dedicated terminals.

4.3 Master/Slave Operation

The two adjustable channels can be configured for series or parallel operation:

• سیریز موڈ: منتخب کریں۔ سیریز on the mode switch. This combines the voltage of both channels, providing up to 60V (e.g., 30V + 30V) at the current limit of the Master channel (up to 5A). Connect the load to the Master output terminals.
• متوازی وضع: منتخب کریں۔ متوازی on the mode switch. This combines the current of both channels, providing up to 10A (e.g., 5A + 5A) at the voltage of the Master channel (up to 30V). Connect the load to the Master output terminals.

In both series and parallel modes, the Master channel controls the overall output, and the Slave channel automatically adjusts accordingly.

5 دیکھ بھال

مناسب دیکھ بھال آپ کی بجلی کی فراہمی کی لمبی عمر اور قابل اعتماد آپریشن کو یقینی بناتی ہے۔

• صفائی: صفائی سے پہلے مینز سے بجلی کی سپلائی منقطع کر دیں۔ بیرونی حصے کو صاف کرنے کے لیے نرم، خشک کپڑا استعمال کریں۔ کھرچنے والے کلینر یا سالوینٹس کا استعمال نہ کریں۔
• وینٹیلیشن: Regularly check that the ventilation openings and fan are free from dust and debris. Use compressed air to clear any blockages if necessary.
• فیوز کی تبدیلی: If the unit fails to power on, check the fuse located in the power input socket on the rear panel. Replace it only with a fuse of the same type and rating (e.g., 250V/T3.15A).

6 خرابیوں کا سراغ لگانا

اگر آپ کو اپنی بجلی کی فراہمی میں مسائل کا سامنا ہے، تو درج ذیل عام مسائل اور حل دیکھیں:

• کوئی طاقت نہیں:
  • Check if the power cord is securely connected to both the unit and the mains outlet.
  • Verify that the mains outlet is functional.
  • Check and replace the fuse if blown (refer to Section 5. Maintenance).
• کوئی آؤٹ پٹ والیومtage/Current:
  • یقینی بنائیں آؤٹ پٹ آن/آف۔ button is pressed (output enabled).
  • چیک کریں کہ والیومtage and current limit knobs are set above zero.
  • Verify that the load is correctly connected and not short-circuited.
  • If the unit is in Constant Current (CC) mode, the current limit has been reached. Increase the current limit or reduce the load.
  • If the unit is in Constant Voltage (CV) mode, the voltage limit has been reached. Increase the voltage limit or reduce the load.
• Overload/Short-Circuit Protection Activated:
  • The unit automatically protects itself from overload and short circuits. Disconnect the load, resolve the issue (e.g., reduce load resistance, fix short), and then re-enable the output.

If the problem persists after following these steps, contact customer support or a qualified service technician.

7. وضاحتیں

8. وارنٹی اور سپورٹ

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty claims.