Cameo Light CLP64RGB10BS LED PAR Headlight User Manual

1. تعارف

Thank you for choosing the Cameo Light CLP64RGB10BS LED PAR Headlight. This device is designed for professional lighting applications, offering vibrant RGB color mixing and flexible control options. This manual provides essential information for safe and efficient operation, setup, and maintenance of your PAR headlight.

2. حفاظتی ہدایات

• Read this manual completely before operating the device.
• مستقبل کے حوالے کے لیے اس دستی کو رکھیں۔
• ڈیوائس کو ہمیشہ گراؤنڈ پاور آؤٹ لیٹ سے جوڑیں۔
• آلے کو بارش یا نمی کے سامنے نہ رکھیں۔
• زیادہ گرمی سے بچنے کے لیے یونٹ کے ارد گرد مناسب وینٹیلیشن کو یقینی بنائیں۔
• روشنی کے منبع سے براہ راست آنکھ کی نمائش سے گریز کریں۔
• صفائی یا سروس کرنے سے پہلے بجلی سے رابطہ منقطع کریں۔
• مرمت صرف اہل اہلکاروں کے ذریعہ کی جانی چاہئے۔

3. پیکیج کے مشمولات

تصدیق کریں کہ پیک کھولنے پر تمام اشیاء موجود ہیں:

• Cameo Light CLP64RGB10BS LED PAR Headlight
• Mounting Brackets (2 strokes)
• ہدایات دستی (یہ دستاویز)
• پاور کیبل

4. پروڈکٹ ختمview

The Cameo Light CLP64RGB10BS features 183 ultra-bright 10mm LEDs (60 red, 60 green, 63 blue) housed in a durable black casing. It includes a control panel for mode selection and DMX connectivity.

تصویر 4.1: سامنے والا view of the Cameo Light CLP64RGB10BS LED PAR Headlight, showing the LED array and included power cable.

تصویر 4.2: طرف view of the PAR headlight, illustrating its compact design and ventilation slots.

تصویر 4.3: پیچھے view showing the control panel with LED display, mode buttons, DMX IN, and DMX OUT ports.

تصویر 4.4: تفصیلی view of the 10mm LED array, highlighting the individual red, green, and blue diodes.

5. سیٹ اپ

5.1 چڑھنا

The CLP64RGB10BS comes with two mounting brackets for versatile installation. These brackets can be used to stand the unit on a flat surface or to attach it to a truss or lighting stand using appropriate clamps (not included). Ensure the mounting surface or structure can safely support the weight of the fixture.

5.2 پاور کنکشن

Connect the supplied power cable to the power input on the rear of the unit and then to a standard grounded electrical outlet. The device operates on standard AC power.

5.3 DMX کنکشن (اختیاری)

For DMX control, connect a DMX controller to the DMX IN port using a 3-pin DMX cable. If linking multiple units, connect the DMX OUT of the first unit to the DMX IN of the next, and so on. Terminate the last unit in the chain with a DMX terminator if experiencing signal issues.

6. آپریٹنگ

6.1 کنٹرول پینل

The control panel on the rear of the unit (refer to Figure 4.3) features an LED display and three buttons: MODE, UP, and DOWN. These buttons are used to navigate menus and adjust settings.

• ہدایات: Cycles through the main menu options and confirms selections.
• یوپی: Increases values or moves up through menu options.
• نیچے: Decreases values or moves down through menu options.

6.2 آپریٹنگ موڈز

The CLP64RGB10BS supports several operating modes:

• DMX موڈ: Allows external control via a DMX controller. The unit can be set to 4 or 6 DMX channels.
• ماسٹر/غلام موڈ: One unit acts as the master, controlling other slave units. Connect DMX OUT of the master to DMX IN of the first slave, and so on.
• اسٹینڈ اسٹون موڈ: The unit operates independently using pre-programmed settings or sound-activated programs.

6.3 DMX چینل موڈز

The device offers two DMX channel configurations:

• 4-چینل موڈ: Typically controls Red, Green, Blue intensity, and Master Dimmer/Strobe.
• 6-چینل موڈ: Provides more granular control, often including Red, Green, Blue intensity, Master Dimmer, Strobe, and Color Macros or other effects.

Refer to the DMX occupation diagram printed on the unit (Figure 4.3) for pin assignments: 1: Ground, 2: Signal (-), 3: Signal (+).

6.4 Sound-to-Light Functionality

In Standalone mode, the unit can react to music via its built-in microphone. Use the control panel to select sound-activated programs and adjust sensitivity if available.

7 دیکھ بھال

7.1 صفائی

Regular cleaning helps maintain optimal light output and extends the lifespan of the unit. Disconnect power before cleaning.

• بیرونی حصے کو صاف کرنے کے لیے نرم، لنٹ سے پاک کپڑا استعمال کریں۔asing.
• For the LED lens, use a soft cloth lightly dampened with a mild glass cleaner. Avoid harsh chemicals.
• اس بات کو یقینی بنائیں کہ وینٹیلیشن کے سوراخ دھول اور ملبے سے پاک ہوں۔

7.2 اسٹوریج

When not in use, store the PAR headlight in a dry, dust-free environment, preferably in its original packaging or a protective case.

8 خرابیوں کا سراغ لگانا

9. وضاحتیں

10. وارنٹی اور سپورٹ

Cameo products are designed for reliability and performance. For information regarding warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Cameo website. For technical support, service, or spare parts, please contact your local dealer or the Cameo customer service department.

کسی بھی وارنٹی دعووں کے لیے براہ کرم اپنے خریداری کا ثبوت اپنے پاس رکھیں۔