تعارف
This manual provides instructions for the proper installation, operation, and maintenance of the Hager 2500 Series Cylindrical Passage Lock, model 129002. This lock is designed for standard duty commercial applications and is suitable for doors requiring a non-locking function, allowing free passage from either side at all times.
حفاظتی معلومات
Always wear appropriate safety gear, such as gloves and eye protection, during installation. Ensure all tools are in good working condition. If you are unsure about any step, consult a qualified professional.
پیکیج کے مشمولات
تنصیب شروع کرنے سے پہلے تصدیق کریں کہ تمام اجزاء موجود ہیں:
- Hager 2500 Series Cylindrical Passage Lock assembly (Withnell Lever Style)
- لیچ میکانزم
- Strike plate (ASA Strike)
- بڑھتے ہوئے پیچ
- Operating keys (two supplied, for specific internal components, not for locking function)
- Installation template (if included with physical product)
سیٹ اپ اور انسٹالیشن
Follow these steps for proper installation of the Hager 2500 Series Cylindrical Passage Lock.
1 دروازے کی تیاری
Ensure your door is prepared with the following standard dimensions:
- کراس بور: 2-1/8 inches (54 mm) diameter
- Edge Bore (Latch Hole): 1 inch (25 mm) diameter
- بیک سیٹ: 2-3/4 انچ (70 ملی میٹر)
Use the provided template (if applicable) to mark and drill holes accurately. Incorrect drilling can affect lock function and security.
2. Install Latch Mechanism
- Insert the latch mechanism into the edge bore of the door, ensuring the bevel of the latch bolt faces the door frame.
- فراہم کردہ پیچ کے ساتھ کنڈی کو محفوظ کریں۔
3. Install Lock Chassis
- Align the lock chassis with the cross bore, ensuring the spindle engages with the latch mechanism.
- Insert the exterior and interior lever assemblies.
- Secure the lock chassis with the through-bolts or mounting screws. The design features no exposed mounting screws for a clean appearance.
4. Install Strike Plate
- Mark the position for the ASA strike plate on the door frame, aligning it with the latch bolt.
- Chisel out the mortise for the strike plate to sit flush with the door frame.
- فراہم کردہ پیچ کے ساتھ اسٹرائیک پلیٹ کو محفوظ کریں۔
Image 1: Hager 2500 Series Cylindrical Passage Lock, Withnell Lever Style, in Satin Chrome finish. This image shows the complete lever set, including both interior and exterior levers and the cylindrical chassis.
آپریٹنگ ہدایات
The Hager 2500 Series Cylindrical Passage Lock is designed for non-locking applications. It allows free entry and exit at all times.
- To open the door, simply depress the lever handle on either side.
- Release the lever to allow the latch bolt to extend and secure the door in the closed position.
نوٹ: While two operating keys are supplied, these are typically for internal component access or specific installation adjustments, not for a locking function on a passage set. This lock does not provide security locking.
دیکھ بھال
Regular maintenance ensures the longevity and smooth operation of your lock.
- صفائی: بیرونی سطحوں کو نرم سے صاف کریں۔amp کپڑا کھرچنے والے کلینر یا سالوینٹس سے پرہیز کریں، جو ختم کو نقصان پہنچا سکتے ہیں۔
- چکنا: Periodically apply a small amount of graphite-based lubricant to the latch bolt mechanism if it becomes stiff. Do not use oil-based lubricants, as they can attract dust and debris.
- معائنہ: Annually inspect all screws and components for tightness. Tighten any loose screws to prevent excessive wear.
خرابی کا سراغ لگانا
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| لیور سخت ہے یا پھیرنا مشکل ہے۔ | گندگی کا جمع ہونا یا پھسلن کی کمی۔ | Clean the mechanism and apply graphite lubricant. |
| لیچ بولٹ مکمل طور پر پیچھے نہیں ہٹتا ہے۔ | Misalignment of lock components or strike plate. | Check alignment of lock chassis and strike plate. Ensure screws are tight. |
| دروازہ بند ہونے پر کھڑکھڑاتا ہے۔ | Strike plate not properly aligned or mortised. | Adjust the strike plate position or depth to ensure a snug fit with the latch bolt. |
وضاحتیں
| فیچر | تفصیل |
|---|---|
| ماڈل نمبر | 129002 |
| سلسلہ | 2500 سیریز |
| لاک کی قسم | Cylindrical Passage Lock (Non-locking) |
| مواد | Heavy Gauge Steel, Zinc (Handle Material: Zinc) |
| ختم کرنا | ساٹن کروم |
| لیور اسٹائل | Withnell |
| بیک سیٹ | 2-3/4 انچ (70 ملی میٹر) |
| Door Prep - Cross Bore | 2-1/8 inches (54 mm) diameter |
| Door Prep - Latch Hole (Edge Bore) | 1 inch (25 mm) diameter |
| ہاتھ کی واقفیت | غیر ہاتھ والا |
| گریڈ | Grade 2 (Standard Duty Commercial) |
| ہڑتال کی پلیٹ | اے ایس اے ہڑتال |
| شامل اجزاء | 2510 WTN US26D (Lock assembly, latch, strike, screws, 2 operating keys) |
وارنٹی کی معلومات
Hager products are manufactured to high standards. For specific warranty terms and conditions applicable to the 2500 Series Cylindrical Passage Lock, please refer to the official Hager website or contact Hager customer support directly. Keep your purchase receipt as proof of purchase.
کسٹمر سپورٹ
If you require further assistance or have questions regarding your Hager 2500 Series Cylindrical Passage Lock, please contact Hager customer support:
- Webسائٹ: Visit the official Hager webمعاون وسائل اور رابطہ کی معلومات کے لیے سائٹ۔
- رابطہ: Refer to the packaging or Hager's website for phone numbers or email addresses.
When contacting support, please have your model number (129002) and purchase details available.