HOTONE TANLA2

Hotone Nano Legacy Purple Wind 5-Watt Compact Guitar Amp ہیڈ انسٹرکشن دستی

1. تعارف

خریداری کے لیے آپ کا شکریہasing the Hotone Nano Legacy Purple Wind 5-Watt Compact Guitar Amp Head. This ultra-compact amplifier head is designed to deliver premium guitar tones, inspired by the legendary Marshall Plexi Super Lead 1959, in a portable format. This manual provides essential information for safe and effective use of your ampزندگی

2. حفاظتی معلومات

  • طاقت کا منبع: Use only the specified power adapter (18V DC, center negative).
  • وینٹیلیشن: زیادہ گرمی سے بچنے کے لیے مناسب وینٹیلیشن کو یقینی بنائیں۔ وینٹیلیشن کے سوراخوں کو مسدود نہ کریں۔
  • نمی: یونٹ کو بارش، نمی، یا ضرورت سے زیادہ نمی کے سامنے نہ رکھیں۔
  • ہینڈلنگ: احتیاط سے ہینڈل کریں۔ یونٹ کو گرانے یا سخت اثرات کے تابع کرنے سے گریز کریں۔
  • سروسنگ: Do not attempt to service this unit yourself. Refer all servicing to qualified personnel.
  • اسپیکر کنکشن: ہمیشہ جڑیں۔ amplifier to a speaker cabinet with the correct impedance (4-16Ω) before powering on to prevent damage.

3. پروڈکٹ ختمview

The Hotone Nano Legacy Purple Wind is a compact 5-watt guitar amplifier head featuring a 3-band EQ and an FX loop. Its design is inspired by classic British rock tones.

فرنٹ پینل کنٹرولز

Hotone Nano Legacy Purple Wind front panel controls diagram
شکل 1: فرنٹ پینل کنٹرولز۔ This image displays the front panel of the Hotone Nano Legacy Purple Wind amplifier head, highlighting the input jack, Bass, Middle, Treble, Gain, and Volume knobs, and the On/Off switch.
  1. ان پٹ: 1/4" mono jack to plug in your guitar.
  2. باس: Controls the low frequency response.
  3. درمیانی: Controls the mid frequency response.
  4. سخت: Controls the high frequency response.
  5. حاصل کرنا: Controls the gain level.
  6. آواز: آؤٹ پٹ والیوم کو کنٹرول کرتا ہے۔
  7. آن/آف سوئچ: یونٹ کو آن یا آف کرتا ہے۔

ریئر پینل کنکشنز

Hotone Nano Legacy Purple Wind rear panel connections diagram
شکل 2: ریئر پینل کنکشنز۔ This image shows the rear panel of the Hotone Nano Legacy Purple Wind amplifier head, detailing the 18V DC input, Phones/Line Output, AUX IN, FX Loop Send/Return, and Speaker Output.
  1. 18 وی ڈی سی: Plug in DC 18V adapter (center negative).
  2. فونز/ لائن آؤٹ پٹ: 1/8" stereo jack, for using headphones or recording.
  3. AX IN: 1/8" stereo jack, for connecting an external music player.
  4. FX لوپ ریٹرن: 1/4" mono jack, connect to your effects output jack.
  5. اسپیکر آؤٹ پٹ: 1/4" mono jack, connect to your cabinet (speaker 4-16Ω).
  6. FX لوپ بھیجیں: 1/4" mono jack, connect to your effects input jack (The Effects Loop is a patch point between the pre-amp اور طاقت amp).

4. سیٹ اپ

  1. Connect Speaker Cabinet: Before powering on, connect a speaker cabinet (4-16Ω impedance) to the SPEAKER OUTPUT jack on the rear panel using a 1/4" mono speaker cable. Failure to connect a speaker cabinet before powering on can damage the ampزندگی
  2. پاور سے رابطہ کریں: Plug the included 18V DC power adapter into the 18V DC input on the rear panel, then plug the adapter into a suitable power outlet.
  3. Connect Guitar: Plug your guitar into the INPUT jack on the front panel using a 1/4" mono instrument cable.
  4. ابتدائی ترتیبات: Turn the VOLUME and GAIN knobs to their minimum (counter-clockwise) positions before powering on.
  5. پاور آن: Flip the ON/OFF switch to the 'ON' position. The indicator light will illuminate.

5. آپریٹنگ ہدایات

  • Adjusting Tone: Use the BASS, MIDDLE, and TREBLE knobs to shape your desired tonal characteristics. Experiment with different settings to find your preferred sound.
  • نفع کو ایڈجسٹ کرنا: The GAIN knob controls the amount of overdrive and distortion. Turn clockwise for more aggressive tones.
  • حجم کو ایڈجسٹ کرنا: The VOLUME knob controls the overall output level of the amplifier. Adjust to your desired listening level.
  • Using the FX Loop: Connect external effects pedals between the FX LOOP SEND and FX LOOP RETURN jacks to integrate them into your signal chain after the preamp سیکشن
  • Headphone/Line Out: For silent practice or direct recording, connect headphones or a line-level device to the PHONES/LINE OUTPUT. This output includes speaker cabinet simulation.
  • AX IN: Connect an external audio source (e.g., MP3 player, smartphone) to the AUX IN jack to play along with backing tracks.

6 دیکھ بھال

  • صفائی: صاف کرنے کے لیے نرم، خشک کپڑا استعمال کریں۔ amplifier's exterior. Do not use liquid cleaners or solvents.
  • ذخیرہ: ذخیرہ کریں۔ amplifier in a dry, cool place away from direct sunlight and extreme temperatures.
  • ٹیوب کی دیکھ بھال: As a hybrid amplifier، preamp tube may eventually need replacement. If you notice a significant change in tone or performance, consult a qualified technician.

7 خرابیوں کا سراغ لگانا

مسئلہممکنہ وجہحل
کوئی آواز نہیں۔Power not connected, speaker not connected, volume/gain too low, faulty cable.Check power connection, ensure speaker is connected, increase volume/gain, test with different cables.
کمزور یا مسخ شدہ آوازFaulty cable, incorrect impedance, worn preamp ٹیوبTest cables, ensure correct speaker impedance, consult technician for tube replacement.
Excessive hum/noiseGround loop, faulty power supply, interference from other electronics.Try different power outlets, use a power conditioner, move away from other electronic devices.

8. وضاحتیں

  • آؤٹ پٹ واٹtage: 5 واٹ
  • طاقت کا منبع: Corded Electric (18V DC, center negative)
  • آئٹم کا وزن: 15.5 اونس
  • مصنوعات کے طول و عرض: 2.34 x 5.03 x 2.95 انچ
  • ہم آہنگ آلات: گٹار
  • کنیکٹر کی قسم: 6.35mm Jack (Input, Speaker Output, FX Loop Send/Return), 3.5mm Jack (Phones/Line Out, AUX IN)
  • اسپیکر کی رکاوٹ: 4-16 اوہم
  • ماڈل نمبر: TANLA2

9. پروڈکٹ ویڈیوز

OriPure 5W Tube Guitar Ampلائفائر ہیڈ

ویڈیو کی تفصیل: This video showcases the OriPure 5W Tube Guitar Amplifier Head, demonstrating its features and sound. It highlights the tube components and various controls, providing an overview of its performance capabilities.

The Joyo Jackman II Is Like A Tiny Marshall JCM 800.

ویڈیو کی تفصیل: یہ ویڈیو ایک تفصیلی ری فراہم کرتا ہے۔view and demonstration of the Joyo Jackman II amplifier head, comparing its sound characteristics to a Marshall JCM 800. It covers clean and dirty tones, control adjustments, and overall performance.

OriPure 15W Tube Guitar Amplifier Head OA-H15

ویڈیو کی تفصیل: This video demonstrates the OriPure 15W Tube Guitar Amplifier Head (Model OA-H15), showcasing its sound quality and features. It includes various guitar riffs and tone adjustments to illustrate its versatility.

JOYO Meteor II BanTamp ایکس ایل سیریز منی Amp Head 20 Watt

ویڈیو کی تفصیل: This video presents the JOYO Meteor II BanTamp ایکس ایل سیریز منی Amp Head, a 20-watt hybrid tube amplifier. It demonstrates the amplifier's clean and overdrive channels, tone controls, and built-in Bluetooth functionality for playing backing tracks.

Valeton Guitar Amplifier Head TAR-20G Amp Pedal Platform Studio Desktop with CAB SIM

ویڈیو کی تفصیل: This video showcases the Valeton Guitar Amplifier Head TAR-20G, highlighting its features as an amp pedal platform and desktop studio amplifier with built-in cab simulation. It demonstrates various tones and connectivity options.

JOYO 20W Amplifier Head BanTamP Series ATOMIC

ویڈیو کی تفصیل: This video features the JOYO 20W Amplifier Head from the BanTamP Series, specifically the ATOMIC model. It demonstrates the amplifier's sound characteristics and features, designed for AC lovers.

10. وارنٹی اور سپورٹ

For warranty information and technical support, please refer to the official Hotone webسائٹ یا اپنے مجاز ڈیلر سے رابطہ کریں۔ خریداری کے ثبوت کے طور پر اپنی خریداری کی رسید اپنے پاس رکھیں۔

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.