تعارف
This manual provides essential information for the safe and effective use of your Carex Shower Bench and Shower Chair. Designed to assist individuals with limited mobility, this transfer bench facilitates safe entry and exit from bathtubs and showers. Please read all instructions carefully before assembly and use to ensure proper function and user safety.
حفاظتی معلومات
- Always ensure all legs are securely locked into place and are at an even height before use.
- Verify the bench is stable and does not wobble on the floor or within the tub.
- زیادہ سے زیادہ وزن کی گنجائش 300 پاؤنڈ سے زیادہ نہ ہو۔
- The non-slip texture on the seat and backrest, along with rubber tips on the legs, are designed for safety. Regularly inspect these components for wear and tear.
- Use caution when transferring to and from the bench. If necessary, seek assistance from a caregiver.
- Keep the shower area well-lit and free of obstacles.
پیکیج کے مشمولات
Your Carex Shower Bench and Shower Chair package should include the following components:
- Main seat sections (3 pieces)
- بیکسٹ
- Frame with adjustable legs and rubber tips
- Armrest (reversible)
- Assembly hardware (hand-spin screws, push-pins)
سیٹ اپ اور اسمبلی
The Carex Shower Bench is designed for tool-free assembly. Follow these steps:
- Unpack all components and ensure all parts are present and undamaged.
- Attach the legs to the main seat frame. Secure them using the integrated push-pins.
- Adjust the height of each leg by pressing the push-pin and sliding the leg to the desired height. Ensure all four legs are set to the same height for stability. The height is adjustable from 16 to 20 inches.
- Attach the backrest to the seat frame. The backrest is reversible for left or right-handed entry.
- Attach the armrest to the desired side of the bench. This is also reversible.
- Place the assembled bench with two legs inside the bathtub and two legs outside, ensuring the rubber tips provide a secure grip on both surfaces.

تصویر 1: The shower bench features tool-free assembly, making setup quick and easy.

تصویر 2: Adjustable legs allow for customization to fit various tub heights and user needs.

تصویر 3: The backrest can be reversed to accommodate left or right-handed entry into the tub.
ویڈیو 1: Official Carex video demonstrating the assembly and key features of the Bathtub Transfer Bench.
آپریٹنگ ہدایات
To use the Carex Shower Bench for safe transfer:
- Position the bench so that two legs are firmly on the bathroom floor and the other two legs are securely inside the bathtub.
- Sit down on the outer portion of the bench, ensuring you are stable and balanced. Use the armrest for support if needed.
- Carefully lift one leg over the tub wall and place it inside the tub.
- Slide across the bench until your body is fully inside the tub, then lift your second leg over the tub wall.
- To exit the tub, reverse the process: slide across the bench, lift one leg out, then the other, using the armrest for support.

تصویر 4: A user demonstrating the safe and easy transfer process into the bathtub with the aid of the bench.
دیکھ بھال
To ensure the longevity and hygiene of your Carex Shower Bench:
- Clean the bench regularly with a mild soap and water solution. Avoid abrasive cleaners that could damage the plastic or aluminum finish.
- Rinse thoroughly after cleaning and allow to air dry.
- Inspect the rubber tips on the legs periodically for wear. Replace if they show signs of cracking or excessive wear to maintain non-slip safety.
- Check all connections and screws regularly to ensure they remain tight and secure.

تصویر 5: The non-slip textured surface and drainage holes facilitate easy cleaning and prevent water accumulation.
خرابی کا سراغ لگانا
- بنچ غیر مستحکم محسوس کرتا ہے: Ensure all legs are adjusted to the same height and are securely locked. Check that the rubber tips are clean and making full contact with the floor/tub surface.
- Difficulty sliding: Ensure the seat surface is clean and dry. If the issue persists, check for any obstructions or damage to the seat panels.
- Rusting on metal parts: While designed to be anti-corrosive, prolonged exposure to harsh chemicals or standing water can affect metal. Ensure proper cleaning and drying after each use.
وضاحتیں
| فیچر | تفصیل |
|---|---|
| ماڈل نمبر | FGB15300 0000 |
| مصنوعات کے طول و عرض | 20.03"D x 30.98"W x 19.24"H |
| کم از کم اونچائی | 16 انچ |
| زیادہ سے زیادہ اٹھانے کی اونچائی | 20 انچ |
| شے کا وزن | 11.7 پاؤنڈز |
| مواد کی قسم | پلاسٹک ، ایلومینیم |
| زیادہ سے زیادہ وزن کی سفارش | 300 پاؤنڈز |
| کارخانہ دار | کیریکس ہیلتھ برانڈز |

تصویر 6: Detailed dimensions of the shower bench for compatibility assessment.
وارنٹی اور سپورٹ
For warranty information, product support, or to inquire about replacement parts, please contact Carex Health Brands directly. Refer to the product packaging or the official Carex webحالیہ رابطے کی تفصیلات اور وارنٹی پالیسیوں کے لیے سائٹ۔