Progress Lighting P6071-31 Outdoor Wall Lantern Instruction Manual

تعارف

This manual provides detailed instructions for the installation, operation, and maintenance of your Progress Lighting P6071-31 outdoor wall lantern. Please read this manual thoroughly before beginning installation or use to ensure proper function and safety.

For your safety, always follow local electrical codes and consult a qualified electrician if you are unsure about any part of the installation process.

حفاظتی معلومات

انتباہ: Always turn off power at the main circuit breaker before installing, cleaning, or servicing this fixture. Failure to do so may result in serious injury or death.

احتیاط: اس پروڈکٹ کو لاگو انسٹالیشن کوڈ کے مطابق کسی ایسے شخص کی طرف سے انسٹال کیا جانا چاہیے جو پروڈکٹ کی تعمیر اور آپریشن اور اس میں شامل خطرات سے واقف ہو۔

اہم: Inspect wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire's insulation, do not attempt installation. Contact customer service.

This fixture is designed for outdoor use and is suitable for wet locations. Ensure all connections are properly sealed to prevent water intrusion.

پیکیج کے مشمولات

تنصیب شروع کرنے سے پہلے تصدیق کریں کہ تمام اجزاء موجود ہیں۔

Light Fixture Assembly
Mounting Hardware Kit (screws, wire nuts, mounting strap)
تنصیب کی ہدایات

Diagram showing all components included in the package for the outdoor wall lantern.

تصویر 1: پھٹا view of the P6071-31 outdoor wall lantern components.

وضاحتیں

وصف	قدر
برانڈ	ترقی روشنی
ماڈل	P6071-31
رنگ	سیاہ
مواد	ایلومینیم
انداز	روایتی
لائٹ فکسچر فارم	دیوار
طول و عرض (تقریباً)	Height: 9-1/8", Width: 5-1/2", Depth from wall: 6-1/2"
بلب کی قسم	Incandescent, 100W Medium Base (Max)
والیومtage	120V
مقام کی درجہ بندی	cCSAus Wet location listed

Dimensional drawing of the Progress Lighting P6071-31 outdoor wall lantern showing height, width, and depth measurements.

Figure 2: Product dimensions for the P6071-31 fixture.

سیٹ اپ اور انسٹالیشن

Before you begin, ensure the power is turned off at the circuit breaker. This fixture is designed for wall mounting over a standard 4" hexagonal recessed outlet box.

Prepare the Mounting Strap: Attach the mounting strap to the outlet box using the provided mounting screws. Ensure the strap is securely fastened.
بجلی کے کنکشن بنائیں:
- Connect the bare copper or green ground wire from the fixture to the green ground screw on the mounting strap.
- Connect the white wire from the fixture to the white (neutral) supply wire using a wire nut.
- Connect the black wire from the fixture to the black (hot) supply wire using a wire nut.
- آؤٹ لیٹ باکس میں تمام تاروں کو احتیاط سے ٹکائیں۔
فکسچر کو ماؤنٹ کریں: Align the fixture with the mounting strap and secure it with the provided mounting screws. Ensure the fixture is flush against the wall and sealed to prevent water entry, especially in wet locations.
بلب انسٹال کریں: Screw in a medium base incandescent bulb (max 100W) into the socket. Do not overtighten.
بجلی کی بحالی: مین سرکٹ بریکر پر پاور کو دوبارہ آن کریں۔

Detailed diagram showing the electrical wiring connections and mounting steps for the outdoor wall lantern.

Figure 3: Installation diagram for the P6071-31 outdoor wall lantern.

آپریٹنگ ہدایات

Once installed and power is restored, the fixture can be operated via the wall switch connected to the circuit. This fixture does not include a built-in switch or sensor.

Ensure the light bulb is securely screwed into the socket.
لائٹ فکسچر کو آن یا آف کرنے کے لیے ایک معیاری وال سوئچ استعمال کریں۔
For optimal performance and longevity, use bulbs within the specified wattagای رینج

دیکھ بھال

باقاعدگی سے دیکھ بھال آپ کی بیرونی دیوار کے لالٹین کی ظاہری شکل اور فعالیت کو برقرار رکھنے میں مدد کرے گی۔

صفائی: To clean the fixture, turn off the power at the circuit breaker. Wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents as they may damage the finish or glass. For glass panels, a mild glass cleaner can be used.
بلب کی تبدیلی: Turn off the power at the circuit breaker and allow the bulb to cool before replacing. Unscrew the old bulb and screw in a new medium base incandescent bulb (max 100W). Do not exceed the maximum wattage.
معائنہ: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Ensure the seal around the mounting surface remains intact to prevent water intrusion.

کلوز اپ view of the Progress Lighting P6071-31 outdoor wall lantern, highlighting the black finish and clear water glass panels.

Figure 4: The P6071-31 fixture, showing details of the finish and glass for cleaning reference.

خرابی کا سراغ لگانا

اگر آپ کو اپنے فکسچر کے ساتھ مسائل کا سامنا کرنا پڑتا ہے، تو درج ذیل عام مسائل اور حل دیکھیں:

مسئلہ	ممکنہ وجہ	حل
لائٹ آن نہیں ہوتی۔	سرکٹ بریکر پر بجلی بند ہے۔ ڈھیلے تار کنکشن۔ خراب بلب۔ ناقص وال سوئچ۔	Check circuit breaker and ensure it is in the "ON" position. Turn off power, check all wire connections and tighten if necessary. بلب کو ایک نئے، کام کرنے والے بلب سے تبدیل کریں۔ Consult a qualified electrician to check the switch.
ہلکی ہلکی ہلکی۔	ڈھیلا بلب۔ ڈھیلے تار کنکشن۔ غلط بلب کی قسم/واٹtage.	ساکٹ میں بلب کو سخت کریں۔ Turn off power, check and tighten wire connections. Ensure bulb is correct type and wattage (max 100W incandescent).
فکسچر hums.	ڈھیلا لگانا۔ غیر موازن مدھم سوئچ (اگر قابل اطلاق ہو)۔	Ensure fixture is securely mounted to the outlet box. If using a dimmer, ensure it is compatible with incandescent loads.

وارنٹی اور سپورٹ

اس پروڈکٹ کا احاطہ کیا گیا ہے۔ 1 سال کی محدود وارنٹی from the date of purchase. This warranty guarantees your complete satisfaction and includes professional after-sales customer service support.

For warranty claims, technical assistance, or any questions regarding your Progress Lighting P6071-31 fixture, please contact Progress Lighting customer service. Please have your model number (P6071-31) and proof of purchase ready when contacting support.

You can find more information and contact details on the official Progress Lighting webسائٹ: www.progresslighting.com