تعارف
This manual provides essential information for the safe and efficient use of your Philips Lighting ER55LD3WR LED Exit Sign. Please read these instructions carefully before installation and operation, and retain them for future reference. This product is designed for commercial lighting applications, specifically as a lighted exit sign.
حفاظتی معلومات
- Always disconnect power before installing or servicing the unit.
- قومی اور مقامی الیکٹریکل کوڈز کے مطابق تنصیب ایک مستند الیکٹریشن کے ذریعے کی جانی چاہیے۔
- اس پروڈکٹ کو اس کے مطلوبہ استعمال کے علاوہ دیگر مقاصد کے لیے استعمال نہ کریں۔
- یقینی بنائیں کہ تمام کنکشن محفوظ اور مناسب طریقے سے موصل ہیں۔
- پانی اور ضرورت سے زیادہ نمی سے دور رہیں۔
پیکیج کے مشمولات
تنصیب شروع کرنے سے پہلے تصدیق کریں کہ تمام اجزاء موجود ہیں:
- Philips Lighting ER55LD3WR LED Exit Sign unit
- بڑھتے ہوئے ہارڈویئر (پیچ، اینکرز)
- ہدایات دستی (یہ دستاویز)
سیٹ اپ اور انسٹالیشن
The Philips Lighting ER55LD3WR LED Exit Sign is designed for wall mounting. Ensure the mounting surface is suitable to support the weight of the unit.
- تنصیب کا علاقہ تیار کریں: Disconnect power to the circuit where the exit sign will be installed.
- چڑھنا:
- Identify the desired wall mounting location.
- Use the provided mounting hardware to securely attach the exit sign to the wall. Ensure the unit is level.
- وائرنگ:
- Connect the building's 120V AC power supply to the corresponding wires on the exit sign. Refer to the wiring diagram inside the unit's housing for specific connections.
- مناسب گراؤنڈنگ کو یقینی بنائیں۔
- Connect the internal battery (if not pre-connected). This is crucial for emergency operation.
- حتمی اسمبلی: Secure any covers or diffusers.
شکل 1: سامنے view of the Philips Lighting ER55LD3WR LED Exit Sign. This image shows the white housing with the red "EXIT" lettering illuminated, indicating its primary function as an emergency egress indicator.
آپریٹنگ ہدایات
Once installed and power is restored, the Philips Lighting ER55LD3WR LED Exit Sign will operate automatically.
- عام آپریشن: When AC power is present, the "EXIT" sign will be illuminated by the internal LEDs. The green indicator light on the unit will be ON, signifying operating status.
- ایمرجنسی آپریشن: In the event of an AC power failure, the unit will automatically switch to battery backup, illuminating the "EXIT" sign for a specified duration (typically 90 minutes).
- ٹیسٹ بٹن: A test button is provided on the unit to verify emergency operation. Press and hold the "Push to Test" button to simulate an AC power failure. The sign should remain illuminated, and the green indicator light will blink, indicating testing. Release the button to return to normal operation.
تصویر 2: کلوز اپ view of the test button and indicator lights on the Philips Lighting ER55LD3WR LED Exit Sign. The green indicator shows operating status (ON for ready, Blinking for testing). The red indicator shows service alerts such as battery, charger board, transformer, or LED strip faults.
دیکھ بھال
Regular maintenance ensures the reliability and longevity of your LED Exit Sign.
- ماہانہ ٹیسٹ: Press the "Push to Test" button for at least 30 seconds to ensure the battery backup system is functioning. The sign should remain illuminated.
- Annual Test: Disconnect AC power to the unit for 90 minutes to verify the battery can sustain emergency illumination for the required duration.
- صفائی: یونٹ کے بیرونی حصے کو نرم، ڈی سے صاف کریں۔amp کپڑا کھرچنے والے کلینر یا سالوینٹس کا استعمال نہ کریں۔
- بیٹری کی تبدیلی: The internal battery has a limited lifespan. If the unit fails to hold a charge or the red "Battery fault" indicator illuminates, the battery may need replacement. Contact qualified service personnel for battery replacement.
خرابی کا سراغ لگانا
عام مسائل اور ان کے حل کے لیے درج ذیل جدول کو دیکھیں۔
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| Sign does not illuminate (AC power present) | No AC power; faulty wiring; LED strip fault | Check circuit breaker; verify wiring connections; contact service for LED replacement. |
| Sign does not illuminate during power outagای (ایمرجنسی موڈ) | Battery not connected; discharged battery; faulty battery; charger board fault | Ensure battery is connected; allow 24 hours for initial charge; replace battery; contact service for charger board repair. |
| Red Service Alert indicator is ON | Indicates battery, charger board, transformer, or LED strip fault (refer to unit label) | Identify specific fault from unit label; perform monthly/annual tests; contact qualified service personnel. |
| Green Operating Status indicator is OFF (AC power present) | No AC power; internal fault | Check AC power supply; contact qualified service personnel. |
وضاحتیں
| فیچر | تفصیل |
|---|---|
| ماڈل نمبر | ER55LD3WR |
| برانڈ | فلپس لائٹنگ |
| روشنی کے منبع کی قسم | ایل ای ڈی |
| والیومtage | 120 وولٹ |
| طاقت کا منبع | کورڈڈ الیکٹرک |
| چڑھنے کی قسم | وال ماؤنٹ |
| مواد | دھات |
| رنگ | سفید |
| مصنوعات کے طول و عرض | 4.25 x 6.25 x 4.8 انچ |
| شے کا وزن | 4.98 پاؤنڈ |
| یو پی سی | 781370410117 |
وارنٹی اور سپورٹ
For warranty information or technical support, please contact Philips Lighting customer service. Keep your purchase receipt as proof of purchase.
مینوفیکچرر: فلپس لائٹنگ
Webسائٹ: ایمیزون پر فلپس اسٹور پر جائیں۔