GEEKRIA EJZ72-02

Geekria Replacement Ear Pads for Sennheiser Momentum Over-Ear Headphones (Model EJZ72-02)

ہدایت نامہ

تعارف

This manual provides instructions for the installation and maintenance of your Geekria Replacement Ear Pads, designed specifically for Sennheiser Momentum Over-Ear headphones. These ear pads are crafted from high-quality memory foam and protein leather to restore comfort and sound isolation to your headphones.

Geekria Replacement Ear Pads, black, showing two ear pads side by side.

Image: Two black Geekria replacement ear pads, made of protein leather and memory foam, designed for Sennheiser Momentum Over-Ear headphones.

مطابقت

These replacement ear pads are compatible with Sennheiser Momentum Over-Ear headphones. Please verify your headphone model to ensure proper fit.

Compatibility diagram showing Sennheiser Momentum Over-Ear headphones as compatible, and Sennheiser Momentum On-Ear and Momentum 2.0 as not compatible. Also shows ear pad dimensions: 9cm (3.54in) width, 8cm (3.14in) height.

Image: A visual guide illustrating that the ear pads are compatible with Sennheiser Momentum Over-Ear headphones, but not with Sennheiser Momentum On-Ear or Momentum 2.0 models. Dimensions are provided: 9cm width and 8cm height.

پیکیج کے مشمولات

  • 2 x Geekria Replacement Ear Pads (Black)
  • 1 x Installation Tool (plastic stick)
Geekria replacement ear pads and a blue installation tool on a wooden surface.

Image: The package contents, including two black replacement ear pads and a blue plastic installation tool, laid out on a wooden table.

تنصیب کی ہدایات

Follow these steps to replace your old ear pads with the new Geekria ear pads:

  1. Remove Existing Earpad: Gently tear off or peel away the worn-out earpad from your headphone cup.
  2. Align New Earpad: Position the new Geekria ear pad over the headphone cup, ensuring the edges align with the groove.
  3. Slip Edge into Gap: Carefully slip one section of the ear pad's edge into the gap or groove on the headphone cup.
  4. Secure the Earpad: Using the provided installation tool or your finger, draw the remaining edge of the ear pad around the headphone cup, pushing the entire edge firmly into the gap until it is fully seated and secure.
Four-step visual guide for installing Geekria replacement ear pads. Step 1: Tear off existing earpad. Step 2: Slip the edge into the gap. Step 3: Draw the edge with a stick/finger. Step 4: Push the whole edge into the gap.

Image: A detailed four-step diagram demonstrating the process of replacing headphone ear pads, from removing the old pad to securing the new one.

Usage and Comfort

Once installed, your new Geekria ear pads will provide enhanced comfort and improved sound isolation. The memory foam conforms to the shape of your ears, offering a personalized fit, while the protein leather ensures a soft touch. Allow a short period for the memory foam to fully adapt to your ear shape for optimal comfort.

دیکھ بھال اور دیکھ بھال

To ensure the longevity of your replacement ear pads, follow these care guidelines:

  • صفائی: Wipe the protein leather surface gently with a soft, damp کپڑا سخت کیمیکلز یا کھرچنے والے کلینر استعمال کرنے سے گریز کریں، کیونکہ یہ مواد کو نقصان پہنچا سکتے ہیں۔
  • ذخیرہ: When not in use, store your headphones in a clean, dry place away from direct sunlight and extreme temperatures.
  • Avoid Punctures: Be careful not to puncture or tear the protein leather, as this can compromise the integrity of the ear pads.

خرابی کا سراغ لگانا

مسئلہممکنہ وجہحل
Ear pads do not fitIncorrect headphone model or improper installation.Verify your headphone model is Sennheiser Momentum Over-Ear. Re-attempt installation, ensuring the entire edge is securely seated in the groove.
Reduced sound quality or isolationEar pads not fully sealed or improperly installed.Ensure the ear pads are completely and evenly seated around the headphone cups to create a proper seal.
استعمال کے دوران تکلیفNew ear pads require break-in period or improper positioning.Allow a few hours of use for the memory foam to adapt to your ear shape. Adjust headphone positioning for optimal comfort.

وضاحتیں

  • ماڈل نمبر: EJZ72-02
  • ہم آہنگ آلات: Sennheiser Momentum Over-Ear Headphones
  • مواد: میموری فوم، پروٹین چرمی
  • رنگ: سیاہ
  • آئٹم کے طول و عرض (L x W x H): 3.31 x 2.95 x 0.79 انچ (8.4 x 7.5 x 2 سینٹی میٹر)
  • آئٹم کا وزن: 19 g (per pair)
  • یونٹ شمار: 2 Count (1 pair)
  • UPC: 638170760198
Image showing the dimensions of a single ear pad with a ruler for scale. The ear pad is oval-shaped, approximately 9cm long and 8cm wide, with a thickness of about 2cm. Text indicates compatibility with Momentum Over-Ear.

Image: A visual representation of the ear pad dimensions, measured against a ruler, confirming its size and compatibility with Momentum Over-Ear headphones.

وارنٹی کی معلومات

Geekria replacement ear pads come with a 1 سال کی صنعت کار وارنٹی. This warranty covers defects in materials and workmanship under normal use. For warranty claims, please retain your proof of purchase and contact customer support.

کسٹمر سپورٹ

For further assistance, questions, or support regarding your Geekria Replacement Ear Pads, please visit the official Geekria webسائٹ یا ان کے کسٹمر سروس ڈیپارٹمنٹ سے رابطہ کریں۔ مخصوص رابطے کی تفصیلات کے لیے اپنی خریداری کی دستاویزات دیکھیں۔

Geekria also offers a SureFit Guarantee: if the ear pads do not fit your headphones, you may contact them for assistance.

Geekria logo and text 'Headphone Accessory Expert' with icons for Cables, Ear Pads & Tips, Cases & Protection, Headbands, Display Stands, and Repair Tools. Also includes 'Geekria SureFit Guarantee: 100% Money Back if Not Compatible'.

تصویر: ایک اوورview of Geekria's product categories and their SureFit Guarantee, emphasizing their expertise in headphone accessories.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.