تعارف
This manual provides instructions for the safe and effective use of your BLACK+DECKER BDCSRAA Right Angle Attachment. This accessory is designed to expand the capabilities of compatible BLACK+DECKER 4V MAX cordless screwdrivers, allowing you to drive screws in tight spaces, corners, and other difficult-to-reach areas.
Please read this manual carefully before using the attachment and retain it for future reference.
حفاظتی معلومات
آگ، برقی جھٹکا، اور ذاتی چوٹ کے خطرے کو کم کرنے کے لیے بجلی کے اوزار اور لوازمات استعمال کرتے وقت ہمیشہ بنیادی حفاظتی احتیاطی تدابیر پر عمل کریں۔
- تمام ہدایات پڑھیں: Familiarize yourself with the operation and limitations of the attachment and the screwdriver.
- آنکھوں کی حفاظت پہنیں: پاور ٹولز چلاتے وقت ہمیشہ حفاظتی شیشے یا چشمیں پہنیں۔
- محفوظ ورک پیس: cl استعمال کریں۔amps یا ورک پیس کو مستحکم پلیٹ فارم تک محفوظ اور سپورٹ کرنے کے دیگر عملی طریقے۔ کام کو ہاتھ سے یا آپ کے جسم کے خلاف پکڑنا غیر مستحکم ہے اور اس سے کنٹرول کھو سکتا ہے۔
- کام کی جگہ کو صاف رکھیں: بے ترتیبی والے علاقے حادثات کو دعوت دیتے ہیں۔
- حد سے تجاوز نہ کریں: ہر وقت مناسب فٹنگ اور توازن رکھیں۔
- بجلی منقطع کریں: Always remove the battery pack from the screwdriver before making any adjustments, changing accessories, or storing the tool.
- صحیح آلات کا استعمال کریں: Do not use the attachment for any purpose other than driving screws.
سیٹ اپ
The BDCSRAA Right Angle Attachment is compatible with BLACK+DECKER 4V MAX cordless screwdrivers, specifically models BDCS20, BDCS30, and BDCS40.
- Ensure Screwdriver is Off: Before attaching, ensure your cordless screwdriver is turned off and the battery is removed for safety.
- سیدھ کریں اور منسلک کریں: Align the hexagonal shaft of the right angle attachment with the chuck of your compatible BLACK+DECKER 4V MAX cordless screwdriver. Push the attachment firmly into the chuck until it clicks into place or is securely seated.
- Insert Screw Bit: The attachment's chuck accepts standard 1/4 inch hex drive screw bits. Insert the desired screw bit into the attachment's chuck. Ensure the bit is fully seated and secure.
Image: Attaching the Right Angle Attachment to a BLACK+DECKER cordless screwdriver. The attachment is being inserted into the screwdriver's chuck.
آپریٹنگ ہدایات
The right angle attachment allows you to access fasteners in confined spaces.
- مناسب بٹ منتخب کریں: Choose the correct 1/4 inch hex drive screw bit for your fastener.
- Position the Attachment: The pivoting 90-degree head allows you to orient the bit for optimal access. Position the angled head so the drill bit sits flush with the screw head to prevent stripping or damaging the material.
- ہلکا دباؤ لگائیں: With the bit engaged in the screw head, apply steady, gentle pressure to the screwdriver and activate the tool.
- کنٹرول رفتار: Use the variable speed control of your cordless screwdriver (if available) to maintain control, especially when starting or finishing a screw.
- زیادہ سختی سے بچیں: Be mindful of the torque settings on your screwdriver to prevent over-tightening or damaging the workpiece.
دیکھ بھال
Regular maintenance ensures optimal performance and extends the life of your attachment.
- صفائی: Keep the attachment clean and free from debris. Wipe with a damp کپڑا سخت کیمیکل یا کھرچنے والے کلینر کا استعمال نہ کریں۔
- ذخیرہ: Store the attachment in a dry place, away from direct sunlight and extreme temperatures.
- معائنہ: Periodically inspect the attachment for any signs of wear or damage. If damage is observed, discontinue use and replace the attachment.
خرابی کا سراغ لگانا
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| Attachment does not fit screwdriver. | Incompatible screwdriver model. | Ensure your screwdriver is a compatible BLACK+DECKER 4V MAX model (BDCS20, BDCS30, BDCS40). |
| Screw bit is loose in the attachment. | Bit not fully inserted or incorrect bit type. | Ensure you are using a standard 1/4 inch hex drive bit and that it is fully seated in the chuck. |
| Difficulty driving screws in tight spaces. | Improper positioning or insufficient pressure. | Adjust the pivoting head for better access. Apply steady, gentle pressure and ensure the bit is flush with the screw head. |
وضاحتیں
- ماڈل: BDCSRAA
- برانڈ: بلیک+ڈیکر
- مواد: دھات، پلاسٹک
- پروڈکٹ کے طول و عرض (L x W x H): 4" x 2" x 6"
- آئٹم کا وزن: 2.4 اونس
- زیادہ سے زیادہ چک سائز: 0.25 Inches (for hex drive bits)
- مطابقت: BLACK+DECKER 4V MAX Cordless Screwdrivers (BDCS20, BDCS30, BDCS40)
وارنٹی
This BLACK+DECKER BDCSRAA Right Angle Attachment comes with a 2 سال کی محدود وارنٹی. For specific terms and conditions, please refer to the warranty card included with your product or visit the official BLACK+DECKER webسائٹ
حمایت
For technical assistance, replacement parts, or warranty claims, please contact BLACK+DECKER customer service. Contact information can typically be found on the official BLACK+DECKER webسائٹ یا مصنوعات کی پیکیجنگ پر۔
آن لائن مدد: www.blackanddecker.com
آفیشل پروڈکٹ ویڈیوز
No relevant official product videos from the seller were found for this specific model in the provided data.