NVX VUBT2 Universal Waterproof Bluetooth Audio Receiver Instruction Manual

1. پروڈکٹ ختمview

The NVX VUBT2 is a universal waterproof Bluetooth 4.0 audio receiver designed to add wireless audio streaming capabilities to various vehicles and vessels, including marine, boats, cars, and ATVs. It features a robust, water-resistant design and provides high-quality stereo audio output.

اہم خصوصیات:

• بلوٹوتھ پرو۔file: A2DP (اعلی معیار، سٹیریو آڈیو)
• Bluetooth Core Specification: Version 4.0 with aptX
• آؤٹ پٹ: One Stereo Pair, Low-Level RCA Plugs
• آؤٹ پٹ والیمtage: 2V RMS
• سگنل سے شور کا تناسب: 93 dB (20 Hz - 20 kHz)
• پانی کی مزاحمت: IPX67 rated for protection against dust and water immersion.
• کنیکٹوٹی: 3.5mm audio input/output.
• ریموٹ ٹرن آن: Amplifier remote turn-on feature.

2. حفاظتی معلومات

براہ کرم انسٹالیشن اور استعمال سے پہلے تمام ہدایات کو بغور پڑھیں۔ ان ہدایات پر عمل کرنے میں ناکامی کے نتیجے میں پروڈکٹ کو نقصان، املاک کو نقصان، یا ذاتی چوٹ پہنچ سکتی ہے۔

• Ensure the vehicle's power is disconnected before installation to prevent electrical shorts.
• Use appropriate wiring gauges and fuses as recommended.
• Mount the device securely to prevent movement during operation.
• Do not expose the device to extreme temperatures or direct flame.
• While the device is waterproof (IPX67), ensure all connections are properly sealed and protected from direct water exposure to maintain integrity.

3. پیکیج کے مشمولات

تصدیق کریں کہ تمام اشیاء آپ کے پیکیج میں موجود ہیں:

• NVX VUBT2 Bluetooth Audio Receiver
• Power/Ground/Remote Wiring Harness with In-line Fuse
• آر سی اے آڈیو کیبل سے 3.5 ملی میٹر
• Mounting Hardware (screws or adhesive pads)

Image: The NVX VUBT2 Bluetooth Audio Receiver shown with its power/ground/remote wiring harness, in-line fuse, and 3.5mm to RCA audio cable.

4. سیٹ اپ اور انسٹالیشن

4.1 وائرنگ رابطے

The VUBT2 requires power, ground, and a remote turn-on connection. It outputs audio via RCA connections.

1. Power (Red Wire): Connect the red wire to a switched 12V power source. This can be the accessory wire from your vehicle's ignition or a dedicated switch. The in-line fuse should be installed close to the power source.
2. گراؤنڈ (سیاہ تار): Connect the black wire to a solid chassis ground point. Ensure a clean, secure connection for optimal performance.
3. ریموٹ ٹرن آن (بلیو وائر): نیلی تار کو اپنے ریموٹ ٹرن آن ان پٹ سے جوڑیں۔ amplifier or other audio components. This will power on the VUBT2 when your system is activated.
4. Audio Output (3.5mm to RCA): Connect the 3.5mm jack from the VUBT2 to the included 3.5mm to RCA cable. Then, connect the RCA plugs (red for right, white for left) to the audio input of your ampلیفائر یا ہیڈ یونٹ۔

Image: The NVX VUBT2 Bluetooth receiver wired to an amplifier, demonstrating the remote turn-on and RCA audio connections.

Image: Close-up of the 3.5mm audio output connected to RCA cables, ready for connection to an audio system.

4.2 چڑھنا

The compact design of the VUBT2 allows for flexible mounting options. It can be mounted using screws through its integrated tabs or with adhesive pads (if included).

• Choose a location that is dry, secure, and allows for proper cable routing.
• Ensure the mounting surface is clean and flat if using adhesive.
• The device is IPX67 rated, making it suitable for exposed locations, but protecting connections is still recommended.

Image: The underside of the NVX VUBT2 unit, displaying the 3M adhesive backing for secure mounting in various applications.

5. آپریٹنگ ہدایات

5.1 بلوٹوتھ جوڑی

1. Ensure the VUBT2 is powered on (your audio system is active).
2. اپنے موبائل ڈیوائس (اسمارٹ فون، ٹیبلیٹ وغیرہ) پر، بلوٹوتھ سیٹنگز پر جائیں۔
3. Scan for available Bluetooth devices. The VUBT2 will appear as "NVX VUBT2" or similar.
4. Select the VUBT2 to pair. A confirmation tone or LED indicator may signal a successful connection.
5. Once paired, your device will typically reconnect automatically when in range and the VUBT2 is powered on.

5.2 آڈیو پلے بیک

After successful pairing, you can stream audio from your mobile device to your connected audio system. Control playback (play/pause, skip tracks, volume) directly from your paired device.

Image: A smartphone screen displaying music controls, illustrating how users can manage audio playback through the NVX VUBT2.

6 دیکھ بھال

The NVX VUBT2 is designed for durability and minimal maintenance. Follow these guidelines to ensure longevity:

• صفائی: ایک نرم استعمال کریں، ڈیamp یونٹ کے بیرونی حصے کو صاف کرنے کے لیے کپڑا۔ سخت کیمیکلز یا کھرچنے والے کلینر سے پرہیز کریں۔
• پانی کی مزاحمت: While IPX67 rated, avoid prolonged submersion or high-pressure water jets directly on the unit or its connections. Regularly inspect wiring and connections for any signs of wear or damage that could compromise water resistance.
• رابطے: وقتاً فوقتاً تمام وائرنگ کنکشن چیک کریں تاکہ یہ یقینی بنایا جا سکے کہ وہ محفوظ اور سنکنرن سے پاک ہیں۔

Image: The NVX VUBT2 unit covered in water droplets, illustrating its IPX67 water-resistance rating for use in challenging environments.

7 خرابیوں کا سراغ لگانا

8. وضاحتیں

9. وارنٹی کی معلومات

NVX products are designed and manufactured to the highest quality standards. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your product or visit the official NVX webسائٹ وارنٹی کے دعووں کے لیے اپنی خریداری کا ثبوت رکھیں۔

10. کسٹمر سپورٹ

If you encounter any issues or have questions regarding your NVX VUBT2 Bluetooth Audio Receiver that are not covered in this manual, please contact NVX customer support for assistance.

• آن لائن مدد: Visit the official NVX webFAQs، امدادی وسائل، اور رابطہ کی معلومات کے لیے سائٹ۔
• بیچنے والے کی حمایت: For purchase-related inquiries, contact the seller directly.