Jebao XTP-10000 Submersible Pond Pump User Manual

1. تعارف

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Jebao XTP-10000 Submersible Pond Pump. Please read these instructions carefully before use and retain them for future reference. This pump is designed for use in ponds and water features, capable of handling dirty water and functioning as both a filter and watercourse pump.

2. حفاظتی ہدایات

چوٹ یا نقصان سے بچنے کے لیے ہمیشہ درج ذیل حفاظتی تدابیر پر عمل کریں:

• یقینی بنائیں کہ پاور سپلائی پمپ کے والیوم سے ملتی ہے۔tage (240V AC)۔
• Do not operate the pump if the cable or housing is damaged.
• Always disconnect the pump from the power supply before performing any maintenance, cleaning, or installation.
• پمپ کو اس کی پاور کیبل سے نہ اٹھائیں اور نہ ہی لے جائیں۔
• The pump is designed for submersible use only. Do not run dry.
• Keep children and animals away from the pond area during pump operation and maintenance.
• Installation should comply with local electrical regulations. A residual current device (RCD) with a tripping current not exceeding 30mA is recommended.

3. پروڈکٹ ختمview اور خصوصیات

The Jebao XTP-10000 pump is an energy-efficient submersible pump designed for continuous operation in pond environments. Key features include:

• اعلی کارکردگی: 10,000 liters per hour (L/hr) flow rate with only 68 watts power consumption.
• ورسٹائل استعمال: Suitable for filter systems and watercourse applications.
• زیادہ سے زیادہ سر: Capable of pumping water up to 4.5 meters.
• کومپیکٹ ڈیزائن: Dimensions of 306mm x 265mm x 127mm.
• نلی کنکشن: 4-s کی خصوصیاتtage rotatable stepped outlet for hose sizes 20mm, 25mm, 32mm, and 40mm.
• موٹر تحفظ: Equipped with a thermal resettable fuse that automatically switches off the pump if it overheats, preventing motor damage.

Figure 1: The Jebao XTP-10000 pump unit, showcasing its compact design and protective casing.

4. سیٹ اپ اور انسٹالیشن

مناسب تنصیب کے لیے ان اقدامات پر عمل کریں:

1. پیک کھولنا: Carefully remove the pump from its packaging. Inspect for any signs of damage.
2. نلی کنکشن:
   • Identify the appropriate hose size (20mm, 25mm, 32mm, or 40mm) for your application.
   • Trim the stepped outlet connector to the desired diameter.
   • Securely attach your pond hose to the trimmed outlet using a hose clamp (not included) to prevent leaks. The outlet can be rotated for optimal hose routing.
3. جگہ کا تعین:
   • Place the pump on a stable, level surface at the bottom of your pond or water feature.
   • Ensure the pump is fully submerged in water. The pump is designed to handle dirty water, but avoid placing it directly in thick sludge to prevent premature clogging.
4. الیکٹریکل کنکشن:
   • The pump comes with a 10-meter cable but without a plug. A qualified electrician must connect the cable to a suitable outdoor, weather-protected power supply, incorporating an RCD.
   • Ensure the cable is routed safely to prevent tripping hazards or damage.

Figure 2: Dimensional drawing of the Jebao XTP-10000 pump, showing its length (306mm), width (265mm), and height (127mm).

5. آپریٹنگ ہدایات

Once installed and connected to the power supply:

• ابتدائی آغاز: Plug in the pump or switch on the power supply. The pump should start immediately, circulating water.
• بہاؤ ایڈجسٹمنٹ: The flow rate is fixed at 10,000 L/hr. If reduced flow is desired, it must be achieved through external valves or flow restrictors in your plumbing system. Note that some external controllers may not be compatible and could cause erratic operation.
• حرارتی تحفظ: The pump is equipped with a thermal resettable fuse. If the pump overheats (e.g., due to low water level, blockage, or prolonged dry running), it will automatically shut off. Allow the pump to cool down and address the cause of overheating before restarting. The pump will automatically reset once cooled.

Figure 3: Performance curve graph illustrating the relationship between pump head (M) and flow rate (L/H) for various XTP series models. The XTP-10000 (purple line) shows a maximum head of 4.5m at 0 L/H and a maximum flow of 10,000 L/H at 0m head.

6 دیکھ بھال

باقاعدگی سے دیکھ بھال آپ کے پمپ کی بہترین کارکردگی اور لمبی عمر کو یقینی بناتی ہے:

• سی کی صفائیasing: Periodically remove the pump from the pond and clean the outer casing to remove accumulated debris, leaves, and algae. This helps maintain efficient water intake.
• امپیلر کی صفائی:
  • Disconnect power before attempting to open the pump.
  • پمپ casing can be opened by pressing two small buttons (refer to product diagram if available, or consult manufacturer for specific opening instructions).
  • Carefully remove the impeller and clean any debris, calcium buildup, or blanket weed from the impeller and its housing. A soft brush and clean water are usually sufficient.
  • Reassemble the pump, ensuring all parts are correctly seated and the casing محفوظ طریقے سے بند ہے۔
• سرمائی ذخیرہ: In freezing conditions, remove the pump from the pond, clean it thoroughly, and store it in a frost-free location, fully submerged in water or kept moist to prevent seals from drying out.

7 خرابیوں کا سراغ لگانا

8. وضاحتیں

9. وارنٹی اور سپورٹ

For warranty information and technical support, please refer to the documentation provided at the point of purchase or contact your retailer. Keep your proof of purchase for any warranty claims. Jebao is committed to providing reliable products and customer assistance.

For further assistance, please visit the official Jebao webسائٹ یا ان کے کسٹمر سروس ڈیپارٹمنٹ سے رابطہ کریں۔