PeakTech 5086 Digital LED Lux Meter User Manual

1. تعارف اور اوورview

The PeakTech 5086 is a precise 3 3/4 digit (max. 3999) LCD digital LED Lux Meter designed for measuring the light intensity of various light sources, including LED, fluorescent, and traditional incandescent lamps with different light colors. It measures in Lux (lx), Footcandle (FC), or Candela (cd).

Unlike simpler lux meters that are typically calibrated for incandescent bulbs at 2856 K and provide inaccurate results for different color temperatures, the PeakTech 5086 allows for the adjustment of various light source factors. This enables accurate measurements for neon lamps، تاپدیپت lamps, red, blue, yellow LEDs, or daylight. The device features 10 freely adjustable correction factors for different light sources, 99 memory locations for measurement values, and useful measurement functions such as minimum, maximum, and average value tracking, as well as data hold. This makes it suitable for professional applications in occupational safety or lighting system evaluation.

اہم خصوصیات:

• Measures light intensity in Lux (lx), Footcandle (FC), or Candela (cd).
• 10 freely adjustable light source factors for various lamp اقسام
• Suitable for colored light sources, LEDs, and other bulb types.
• Measurement refresh rate: approximately 2.5 times per second.
• External sensor with cosine angle correction.
• Data Hold, Minimum/Maximum/Average (AVG) measurement functions.
• Automatic range selection and zero adjustment.
• 99 memory locations for storing measurement values.

2. حفاظتی معلومات

براہ کرم ڈیوائس کو چلانے سے پہلے تمام حفاظتی ہدایات کو پڑھیں اور سمجھیں۔ ان ہدایات پر عمل کرنے میں ناکامی کے نتیجے میں آلہ کو چوٹ یا نقصان پہنچ سکتا ہے۔

• آلہ کو انتہائی درجہ حرارت، نمی، یا براہ راست سورج کی روشنی کے سامنے نہ رکھیں۔
• مضبوط کمپن یا اثرات سے بچیں.
• ڈیوائس کو کھولنے یا اس میں ترمیم کرنے کی کوشش نہ کریں۔ تمام خدمات کو اہل اہلکاروں سے رجوع کریں۔
• یقینی بنائیں کہ بیٹریاں درست قطبیت کے ساتھ داخل کی گئی ہیں۔ بیٹریاں ہٹا دیں اگر آلہ طویل مدت تک استعمال نہیں کیا جائے گا۔
• Keep the sensor clean and free from obstructions to ensure accurate readings.

3. پیکیج کے مشمولات

تصدیق کریں کہ نیچے دی گئی تمام اشیاء آپ کے پیکج میں موجود ہیں:

• PeakTech 5086 Digital LED Lux Meter with external sensor
• لے جانے والا بیگ
• بیٹریاں (پہلے سے انسٹال یا الگ سے شامل)
• صارف دستی

4. ڈیوائس لے آؤٹ

The PeakTech 5086 consists of a main unit with an LCD display and control buttons, and an external light sensor connected via a coiled cable. The sensor is equipped with a protective cap.

تصویر 4.1: PeakTech 5086 Digital LED Lux Meter showing the main display unit and the external light sensor with its protective cap removed.

کنٹرول اور ڈسپلے:

• LCD ڈسپلے: Shows measurement values, units (Lux, FC, Cd), battery status, and active functions (e.g., HOLD, MIN, MAX, AVG, Light Source factor).
• پاور بٹن (⏻): ڈیوائس کو آن یا آف کرتا ہے۔
• LX/FC/CD Button: Toggles between Lux, Footcandle, and Candela measurement units.
• MEM/READ Button: Accesses memory functions to store or recall readings.
• HOLD/L.S. Button: Activates Data Hold function or enters Light Source factor adjustment mode.
• زیرو بٹن: Performs zero adjustment for the sensor.
• اوپر (▲) / نیچے (▼) بٹن: Used for navigation and adjusting values in settings modes.

5. سیٹ اپ

5.1 بیٹری کی تنصیب

The PeakTech 5086 typically comes with batteries pre-installed. If not, or if batteries need replacement:

1. Locate the battery compartment cover on the back of the main unit.
2. Open the cover by sliding or unscrewing it (refer to the diagram in the full manual if unsure).
3. Insert the required batteries (usually AAA or 9V, check the compartment for markings) ensuring correct polarity (+/-).
4. بیٹری کے کمپارٹمنٹ کور کو محفوظ طریقے سے بند کریں۔

5.2 سینسر کو جوڑنا

The external sensor is permanently attached via a coiled cable. Ensure the cable is not damaged or excessively stretched. The sensor head should be clean and the protective cap removed before taking measurements.

6. آپریٹنگ ہدایات

6.1 پاور آن/آف۔

• پاور بٹن دبائیں (⏻) to turn the device on. The display will illuminate and show a reading.
• پاور بٹن دبائیں اور تھامیں (⏻) for a few seconds to turn the device off.

6.2 Unit Selection (Lux/FC/Cd)

• دبائیں LX/FC/CD button to cycle through the available measurement units: Lux (lx), Footcandle (FC), and Candela (cd). The selected unit will be displayed on the LCD.

6.3 صفر ایڈجسٹمنٹ

• Before taking measurements, especially in low light conditions, it is recommended to perform a zero adjustment.
• Place the protective cap over the sensor to block all light.
• دبائیں صفر button. The display should show "0" or a very small value.
• Remove the protective cap before measuring.

6.4 Setting Light Source Factors (L.S.)

The PeakTech 5086 allows for compensation of different light sources. There are 10 adjustable factors (L.S. 0 to L.S. 9).

1. دبائیں اور تھامیں۔ HOLD/L.S. button until "L.S." appears on the display, indicating you are in Light Source factor adjustment mode.
2. استعمال کریں۔ اوپر (▲) اور نیچے (▼) buttons to select one of the 10 factor memory locations (L.S. 0 to L.S. 9).
3. دبائیں HOLD/L.S. again to enter the adjustment for the selected factor.
4. استعمال کریں۔ اوپر (▲) اور نیچے (▼) buttons to adjust the factor value. Consult the full manual or light source specifications for appropriate values.
5. دبائیں HOLD/L.S. to confirm the setting and exit the adjustment mode.

6.5 ڈیٹا ہولڈ فنکشن

• پیمائش کے دوران، دبائیں HOLD/L.S. button (short press) to freeze the current reading on the display. "HOLD" will appear.
• دبائیں HOLD/L.S. again to release the hold and resume live measurements.

6.6 Minimum, Maximum, and Average (AVG) Measurement

This function allows you to track the lowest, highest, and average light intensity over a measurement period.

1. دبائیں میم/پڑھیں۔ button (short press) repeatedly to cycle through MIN, MAX, and AVG modes. The corresponding indicator will appear on the display.
2. In MIN mode, the display shows the lowest reading recorded since entering the mode.
3. In MAX mode, the display shows the highest reading recorded.
4. In AVG mode, the display shows the average reading.
5. To exit MIN/MAX/AVG mode, press the میم/پڑھیں۔ button until no indicator is shown, or turn the device off and on again.

6.7 Memory Functions (Store/Recall)

The device can store up to 99 measurement values.

Storing a Measurement:

1. With a live reading on the display, press and hold the میم/پڑھیں۔ button until "MEM" flashes and a memory location number appears.
2. استعمال کریں۔ اوپر (▲) اور نیچے (▼) buttons to select an empty memory location (or overwrite an existing one).
3. دبائیں میم/پڑھیں۔ again to store the value. The display will briefly confirm storage.

Recalling Stored Measurements:

1. دبائیں میم/پڑھیں۔ button (short press) repeatedly until "READ" appears on the display.
2. استعمال کریں۔ اوپر (▲) اور نیچے (▼) buttons to scroll through the stored memory locations.
3. To exit recall mode, press میم/پڑھیں۔ until "READ" disappears, or turn the device off and on.

7 دیکھ بھال

7.1 صفائی

• Wipe the device and sensor with a soft, dry cloth.
• کھرچنے والے کلینر یا سالوینٹس کا استعمال نہ کریں۔
• Keep the sensor's light-receiving surface clean and free of dust or fingerprints for accurate readings.

7.2 بیٹری کی تبدیلی

When the low battery indicator appears on the display, replace the batteries as described in Section 5.1. Always use fresh batteries of the specified type.

7.3 اسٹوریج

• When not in use, store the device in its carrying bag with the sensor cap in place.
• براہ راست سورج کی روشنی اور انتہائی درجہ حرارت سے دور، ٹھنڈی، خشک جگہ پر اسٹور کریں۔
• بیٹریوں کو ہٹا دیں اگر لیکیج کو روکنے کے لیے طویل مدت کے لیے ذخیرہ کیا جائے۔

8 خرابیوں کا سراغ لگانا

9. وضاحتیں

10. وارنٹی اور سپورٹ

PeakTech products are designed for reliability and performance. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official PeakTech webسائٹ

Information regarding spare parts availability and software updates is not explicitly provided in the product details. For technical support or service inquiries, please contact your local PeakTech distributor or customer service department.