Phocos CIS10 IP68 10Amp سولر چارج کنٹرولر صارف دستی

1. تعارف

This manual provides essential instructions for the safe and efficient operation of your Phocos CIS10 IP68 10Amp Solar Charge Controller. The CIS10 is designed for off-grid solar light systems and battery charging, featuring automatic 12V/24VDC system voltage detection and a robust IP68 waterproof design. Please read this manual thoroughly before installation and use.

2. حفاظتی معلومات

اہم حفاظتی ہدایات:

• ہمیشہ بیٹری کو پہلے چارج کنٹرولر، پھر سولر پینل اور آخر میں لوڈ سے جوڑیں۔ الٹ ترتیب میں منقطع کریں۔
• Ensure all connections are tight and secure to prevent excessive voltage drop and loose connections.
• Install the controller in a well-ventilated area, away from flammable gases.
• خود کو جدا نہ کریں اور نہ ہی کنٹرولر کو ٹھیک کرنے کی کوشش کریں۔ خدمت کے لیے اہل افراد سے رابطہ کریں۔
• Wear appropriate personal protective equipment (PPE) when working with batteries and solar panels.
• The controller is IP68 rated for water and dust ingress, but avoid submerging it for extended periods or exposing it to high-pressure water jets.

3. مصنوعات کی خصوصیات

The Phocos CIS10 Solar Charge Controller offers the following key features:

• IP68 واٹر پروف ڈیزائن: Suitable for outdoor use, resistant to water spray, rain, and condensation.
• خودکار جلدtagای کا پتہ لگانا: خود بخود 12V یا 24V DC سسٹم والیوم کا پتہ لگاتا ہے۔tages
• 5-ایسtage PWM Technology: Provides Soft Start, Bulk, Absorption, Float, and Equalization charging stages for optimal battery health and system performance.
• وسیع بیٹری مطابقت: Works with LifePo4, LTO, GEL, AGM, Lead-Acid, Calcium, and EFB batteries.
• کثیر تحفظ کی خصوصیات: Built-in protection against over-temperature, over-voltage, over-current, over-charging, over-discharging, overload, and short circuits.
• Compact and Thin Design: Maximizes solar power utilization with minimal self-power consumption.

4. سیٹ اپ اور انسٹالیشن

Follow these steps for proper installation of your Phocos CIS10 controller:

1. چڑھنا: Choose a suitable location for mounting the controller. Although IP68 rated, mounting in a shaded or protected area can extend its lifespan. Ensure adequate space for cable connections.
2. بیٹری کنکشن: Connect the battery cables to the controller's battery terminals first. Ensure correct polarity (positive to positive, negative to negative). The controller will automatically detect the system voltage (12V یا 24V)۔
   

   Image 4.1: Phocos CIS10 controller showing battery, solar panel, and load connection points, along with LED indicators for status.

3. سولر پینل کنکشن: Connect the solar panel cables to the controller's solar panel terminals. Observe correct polarity. The controller will begin charging the battery.
4. لوڈ کنکشن (اختیاری): If using the controller for a DC load (e.g., solar light), connect the load cables to the controller's load terminals. Ensure correct polarity.
5. کنکشنز کی تصدیق کریں: Double-check all connections for tightness and correct polarity before powering on the system.

The controller's compact design and integrated wiring simplify installation. Its IP68 rating ensures durability in various outdoor conditions.

Image 4.2: The Phocos CIS10 controller demonstrating its compact size with a ruler and highlighting its IP68 waterproof capability.

5. آپریٹنگ ہدایات

The Phocos CIS10 operates automatically once connected. It utilizes advanced 5-stage Pulse Width Modulation (PWM) charging technology to optimize battery charging and extend battery life.

5.1 چارجنگ ایسtages

• نرم آغاز: Gradually increases current to the battery.
• بلک چارج: بیٹری کو تقریباً 80% صلاحیت تک تیزی سے چارج کرنے کے لیے زیادہ سے زیادہ کرنٹ فراہم کرتا ہے۔
• جذب چارج: بیٹری کو مستقل والیوم پر چارج کرتا ہے۔tage to bring it to 100% capacity.
• فلوٹ چارج: ایک چھوٹا، مستقل والیوم فراہم کرکے بیٹری کو مکمل چارج پر برقرار رکھتا ہے۔tage.
• مساوات: Automatically performs equalization every 28 days for calcium/EFB batteries to prevent sulfation and ensure cell balance.

5.2. Work Mode (Optional)

The CIS10 controller supports configurable work modes, such as time control and light control, which can be set using an optional external unit like the CIS-CU (sold separately). This allows for customized operation of connected loads, such as solar lights.

6 دیکھ بھال

The Phocos CIS10 is designed for minimal maintenance due to its robust IP68 rating and epoxy-encapsulated PCB. However, periodic checks are recommended:

• بصری معائنہ: Periodically inspect the controller and all connections for any signs of damage, corrosion, or loose wiring.
• صفائی: If necessary, gently clean the exterior of the controller with a damp کپڑا سخت کیمیکل یا کھرچنے والے مواد کا استعمال نہ کریں۔
• بیٹری کی صحت: Monitor your battery's performance. The controller's equalization feature helps maintain battery health for compatible types.

7 خرابیوں کا سراغ لگانا

The CIS10 controller includes multiple built-in protections to prevent damage. If you encounter issues, consider the following:

• No Charging/Load Output:
  • Check all wiring connections for tightness and correct polarity.
  • یقینی بنائیں کہ سولر پینل مناسب سورج کی روشنی حاصل کر رہا ہے۔
  • بیٹری والیوم کی تصدیق کریں۔tage is within the operating range (12V/24V).
  • Check for any blown fuses in the system (if applicable).
• زیادہ درجہ حرارت سے تحفظ: If the controller becomes excessively hot, it may temporarily reduce or stop charging/output. Ensure it's not installed in an area with poor ventilation or direct, intense heat.
• اوور والیمtagای/انڈر والیومtagای تحفظ: The controller will protect the battery from overcharging or deep discharge. If the battery voltage is too low, the load may be disconnected.
• Short Circuit/Overload Protection: If a short circuit or overload occurs on the load or solar input, the controller will temporarily shut down to protect itself and the system. Remove the fault and the controller should resume normal operation.

If problems persist, refer to the detailed specifications or contact Phocos customer support.

8. وضاحتیں

Detailed technical specifications for the Phocos CIS10 Solar Charge Controller:

9. وارنٹی اور سپورٹ

Phocos is a German brand known for quality assurance in solar power products. For warranty information, technical support, or service inquiries, please contact your authorized Phocos dealer or visit the official Phocos webسائٹ وارنٹی کے دعووں کے لیے اپنی خریداری کی رسید اپنے پاس رکھیں۔

For additional resources and product updates, you may visit the Phocos official webسائٹ.