AIBOO Linkable Under Cabinet LED Lighting System User Manual

1. تعارف

This manual provides comprehensive instructions for the installation, operation, and maintenance of your AIBOO Linkable Under Cabinet LED Lighting System. This system features hardwired 12V slim aluminum dimmable puck lights with a wireless controller, designed for ambiance lighting in various indoor settings. Please read this manual thoroughly before installation and use.

2. اہم حفاظتی معلومات

• برقی حفاظت: This product is designed for 110V/120Vac input and requires hardwiring. Installation should be performed by a qualified electrician or an individual with intermediate knowledge of electrical wiring to prevent electric shock or fire hazards. Ensure power is disconnected at the circuit breaker before any installation or maintenance.
• کوئی وال پلگ نہیں: This system does NOT include a wall plug power adapter. It is intended for direct wiring into your electrical system.
• صرف اندرونی استعمال: This lighting system is designed for indoor use in dry locations. Do not expose to moisture or water.
• وینٹیلیشن: Ensure adequate ventilation around the LED driver to prevent overheating.
• اجزاء کی مطابقت: Use only the components provided or specified by AIBOO. Using incompatible parts may damage the system or pose a safety risk.

3. پیکیج کے مشمولات

تصدیق کریں کہ نیچے دی گئی تمام اشیاء آپ کے پیکیج میں شامل ہیں:

• LED Puck Lights (6 units)
• RF Wireless Remote Control (1 unit)
• LED Controller (1 unit)
• 12V 1A Hardwired LED Driver (Power Adapter) (1 unit)
• 5ft Extension Cords (2 units)
• 6-Way Splitter (1 unit)
• Mounting Stickers (12 units)
• بڑھتے ہوئے پیچ (12 یونٹ)

4. مصنوعات کی تفصیلات

5. سیٹ اپ اور انسٹالیشن

Before beginning installation, ensure the main power supply to the installation area is turned off at the circuit breaker.

5.1 وائرنگ ڈایاگرام اوورview

5.2 Hardwired Power Adapter Connection

The system includes a hardwired power adapter (LED Driver) designed to connect directly to a 110V/120Vac circuit. This adapter converts AC power to 12V DC for the LED lights. A wall plug is not included.

1. مین سرکٹ بریکر پر بجلی بند کر دیں۔
2. Connect the input wires of the LED driver to your 110V/120Vac circuit wiring. Ensure proper polarity (live to live, neutral to neutral, ground to ground) according to local electrical codes.
3. Secure all connections with appropriate wire connectors.

5.3 Connecting the Puck Lights

The puck lights can be connected in two primary configurations: Series Connection or Parallel Connection.

5.3.1 سلسلہ کنکشن

In a series connection, the puck lights are linked one after another. This method is suitable for linear installations where lights are spaced evenly in a line.

1. Connect the LED controller to the output of the hardwired LED driver.
2. Connect the first puck light to the LED controller.
3. Connect the subsequent puck lights to each other using their integrated cables.
4. Use extension cords if additional length is required between lights.

5.3.2 متوازی کنکشن

For installations requiring lights to branch out from a central point, the 6-way splitter allows for parallel connection.

1. Connect the LED controller to the output of the hardwired LED driver.
2. Connect the 6-way splitter to the LED controller.
3. Connect individual puck lights to the available ports on the 6-way splitter.
4. Use extension cords if additional length is required for individual lights.

5.4 Mounting the Puck Lights

The puck lights can be mounted using either the provided screws or adhesive stickers.

1. سطح کی تیاری: یقینی بنائیں کہ بڑھتی ہوئی سطح صاف، خشک اور ہموار ہے۔
2. چپکنے والی چڑھائی: Peel the backing from the adhesive sticker and firmly press the puck light onto the desired surface. Hold for 30 seconds to ensure a strong bond.
3. سکرو ماؤنٹنگ: Use the provided screws to secure the puck lights to the surface. Pre-drilling pilot holes may be necessary depending on the material.

6. آپریٹنگ ہدایات

The AIBOO LED Lighting System is controlled by an RF wireless remote control.

6.1 ریموٹ کنٹرول کے افعال

• آن/آف: دبائیں ON button to turn the lights on, and the آف button to turn them off.
• چمک ایڈجسٹمنٹ:
  • دبائیں LIGHT + or LIGHT - to gradually increase or decrease brightness (stepless dimming).
  • استعمال کریں۔ 100%, 50%, 25% buttons for quick brightness presets.
• جوڑا بنانا: To pair the remote with the controller, press the جوڑا button within 5 seconds of powering on the lights until the lights flicker.
• Decoding (1 to More Pair): To pair one remote with multiple controllers, press the ڈی کوڈ button within 5 seconds of powering on the lights until the lights flicker.
• ٹائمنگ افعال: دبائیں 1H, 2H, 4H، یا 8H to set the lights to automatically turn off after 1, 2, 4, or 8 hours, respectively.

7 دیکھ بھال

The AIBOO LED Lighting System requires minimal maintenance.

• صفائی: Ensure the lights are off and cool before cleaning. Wipe the puck lights and controller with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• معائنہ: Periodically check all connections for tightness and inspect cables for any signs of damage.
• بیٹری کی تبدیلی: The remote control requires 1 CR2 battery. Replace the battery when the remote's range decreases or it stops responding.

8 خرابیوں کا سراغ لگانا

If you encounter issues with your AIBOO LED Lighting System, refer to the following common problems and solutions:

9. وارنٹی کی معلومات

AIBOO products are manufactured to high-quality standards. For specific warranty details regarding your Linkable Under Cabinet LED Lighting System, please refer to the warranty card included with your purchase or visit the official AIBOO webسائٹ کسی بھی وارنٹی دعووں کے لیے خریداری کے ثبوت کے طور پر اپنی خریداری کی رسید رکھیں۔

10. کسٹمر سپورٹ

For technical assistance, troubleshooting, or product inquiries, please contact AIBOO customer support.

• U.S. Live Customer Support: Monday - Friday, 9 AM - 5 PM (EST)
• آن لائن وسائل: کا دورہ کریں۔ AIBOO Store on Amazon اضافی مصنوعات کی معلومات اور مدد کے لیے۔