KERN PCD 6K-4 پریسجن لیبارٹری بیلنس صارف دستی

1. تعارف

This manual provides essential instructions for the safe and efficient operation of your KERN PCD 6K-4 Precision Laboratory Balance. This laboratory scale features a separate weighing platform, making it ideal for use in specialized environments such as glove-bags or extractor cabinets, particularly when weighing toxic, volatile, or contaminated substances. It includes a PRE-TARE function for manual extraction of known container weights, useful for precise filling quantity controls.

براہ کرم ابتدائی استعمال سے پہلے اس دستی کو اچھی طرح پڑھیں اور اسے مستقبل کے حوالے کے لیے رکھیں۔

2. حفاظتی ہدایات

• Always operate the balance on a stable, level surface free from vibrations.
• Avoid exposing the balance to extreme temperatures, direct sunlight, or high humidity.
• بیلنس کو اس کی زیادہ سے زیادہ 6000 گرام کی گنجائش سے زیادہ بوجھ نہ دیں۔
• Keep the balance clean and free from dust and chemical spills.
• صرف ڈیوائس کے ساتھ فراہم کردہ پاور اڈاپٹر استعمال کریں۔
• Do not attempt to disassemble or repair the balance yourself. Refer to qualified service personnel.

3. پیکیج کے مشمولات

تصدیق کریں کہ پیک کھولنے پر تمام آئٹمز موجود ہیں اور ان کا کوئی نقصان نہیں ہوا:

• KERN PCD 6K-4 Weighing Platform
• ڈیجیٹل ڈسپلے یونٹ
• پاور اڈاپٹر
• Wind Protection Ring (for models with Ø 105 mm weighing plate)
• حفاظتی کور
• صارف دستی (یہ دستاویز)

Figure 1: KERN PCD 6K-4 Precision Laboratory Balance
This image shows the KERN PCD 6K-4 precision laboratory balance. It consists of a square weighing platform with a stainless steel surface, connected by a cable to a separate digital display unit. The display unit features a large digital readout, along with buttons for ON/OFF, MODE/CAL, SET/M, PRINT, and TARE. The display indicates a maximum capacity of 3500g and a readability of 0.01g, though the model is 6K-4 (6000g max). The separate design is ideal for use in specialized environments like glove-bags.

4. سیٹ اپ

1. جگہ کا تعین: Place the weighing platform and display unit on a stable, vibration-free, and level surface. Ensure sufficient space for operation and avoid direct sunlight, drafts, or significant temperature fluctuations.
2. اسمبلی: Connect the cable from the weighing platform to the designated port on the digital display unit.
3. لیولنگ: Use the adjustable foot bolts located on the underside of the weighing platform to level the balance. Observe the integrated spirit level (if present) to ensure precise horizontal alignment.
4. ہوا کی حفاظت: If your model includes a wind protection ring (for Ø 105 mm weighing plates), carefully place it around the weighing platform. This helps stabilize readings in environments with air currents.
5. پاور کنکشن: Connect the power adapter to the display unit and then plug it into a suitable power outlet.

5. آپریٹنگ ہدایات

5.1 پاور آن/آف

• To turn the balance ON، دبائیں آن/آف button. The display will show a self-test and then settle at 0.00g.
• To turn the balance آف، دبائیں اور تھامیں آن/آف بٹن جب تک ڈسپلے آف نہ ہو جائے۔

5.2 بنیادی وزن

1. Ensure the balance is powered on and displays 0.00g.
2. وزن کے پلیٹ فارم کے بیچ میں وزنی چیز کو احتیاط سے رکھیں۔
3. Wait for the display to stabilize. The stable weight will be shown.
4. Remove the item from the platform.

5.3 TARE Function

The TARE function allows you to subtract the weight of a container, so only the net weight of the contents is displayed.

1. Place the empty container onto the weighing platform. The display will show its weight.
2. دبائیں پھاڑ دیں بٹن ڈسپلے 0.00g پر ری سیٹ ہو جائے گا۔
3. کنٹینر میں وزن کرنے کے لیے مادہ شامل کریں۔ ڈسپلے مادہ کا خالص وزن دکھائے گا۔

The balance also features a PRE-TARE function for manual entry of a known container weight. Consult the full manual for detailed instructions on using PRE-TARE, typically accessed via the MODE/CAL or SET/M button in specific modes.

5.4 Unit Selection / Mode

دبائیں MODE/CAL button to cycle through available weighing units (e.g., grams, kilograms, pounds, ounces) or to enter different operating modes. Refer to the full manual for a list of supported units and mode functions.

5.5 انشانکن

Regular calibration ensures the accuracy of your balance. Calibration should be performed using certified calibration weights.

1. Ensure the balance is stable and free from any load.
2. دبائیں اور تھامیں۔ MODE/CAL بٹن جب تک کہ "CAL" ڈسپلے پر ظاہر نہ ہو۔
3. Follow the on-screen prompts to place the required calibration weight(s) onto the platform.
4. Once calibration is complete, the balance will return to weighing mode.

Note: Specific calibration procedures may vary. Always consult the detailed instructions provided with your balance for precise steps and recommended calibration weights.

5.6 Print Function

If your balance is connected to a compatible printer or data interface, pressing the پرنٹ button will send the current weighing data to the connected device.

6 دیکھ بھال

• صفائی: صفائی سے پہلے بجلی منقطع کریں۔ ایک نرم استعمال کریں، ڈیamp cloth with a mild detergent to clean the weighing platform and display unit. Avoid abrasive cleaners or solvents. Ensure no liquid enters the device.
• ذخیرہ: When not in use for extended periods, store the balance in a clean, dry, and stable environment. Use the provided safety cover to protect it from dust.
• معائنہ: Regularly inspect the power cable and connections for any signs of damage.

7 خرابیوں کا سراغ لگانا

8. وضاحتیں

• ماڈل: KERN PCD 6K-4
• برانڈ: KERN
• زیادہ سے زیادہ صلاحیت: 6000 گرام (6 کلوگرام)
• پڑھنے کی اہلیت: Typically 0.01 g (Note: Image shows 0.01g for a 3500g model, actual readability for 6000g model may vary slightly, but is generally in this precision range.)
• ڈسپلے کی قسم: ڈیجیٹل
• خصوصی خصوصیت: PRE-TARE function
• تجویز کردہ استعمال: Laboratory/scientific applications
• مصنوعات کے طول و عرض: 11.02 x 6.5 x 2.95 inches (Weighing platform and display unit combined/approximate)
• مینوفیکچرر: KERN & SOHN GmbH

9. وارنٹی اور سپورٹ

For warranty information, technical support, or service inquiries, please contact your KERN dealer or visit the official KERN website. Keep your purchase receipt and product serial number available when contacting support.