Valore 7 Retrofit Easy Install Shower Panel

1. پروڈکٹ ختمview

The Valore 7 shower panel is designed for retrofit installation into existing shower systems that include a cold and hot faucet. It connects to an existing shower head spout. The panel body is constructed from durable 304 stainless steel, offering a modern aesthetic for bathroom upgrades.

This shower panel features a 3-way shower spray mode system, allowing for versatile water delivery options. It includes a brass shower wand with a brass shower cradle for handheld use.

Image 1.1: Valore 7 Shower Panel installed in a modern bathroom setting.

2. حفاظتی معلومات

• اس بات کو یقینی بنائیں کہ تنصیب شروع کرنے سے پہلے پانی کی تمام لائنیں بند ہیں۔
• تنصیب کے دوران مناسب ذاتی حفاظتی سامان، جیسے حفاظتی شیشے اور دستانے پہنیں۔
• اگر آپ کو انسٹالیشن کے عمل کے کسی بھی حصے کے بارے میں یقین نہیں ہے تو، کسی قابل پلمبر سے مشورہ کریں۔
• Do not use abrasive cleaners or harsh chemicals on the shower panel's surface, as this may damage the finish.

3. پیکیج کے مشمولات

تنصیب شروع کرنے سے پہلے تصدیق کریں کہ تمام اجزاء موجود ہیں:

• Shower Panel Unit
• شاور ہیڈ
• Shower Wand (Handheld Shower)
• Shower Cradle for Handheld Shower
• بڑھتے ہوئے ہارڈ ویئر
• Flexible Hoses for Water Connection
• انسٹالیشن دستی

4. وضاحتیں

5. طول و عرض

تفصیلی مصنوعات کے طول و عرض کے لیے نیچے دیے گئے خاکے سے رجوع کریں۔

Image 5.1: Valore 7 Shower Panel Dimensions Diagram. All measurements are approximate.

6. تنصیب کی ہدایات

The Valore 7 shower panel is designed for easy retrofit installation. It connects to your existing shower head spout and hot/cold water lines.

6.1 پری انسٹالیشن

1. پانی کی فراہمی بند کریں: Locate and turn off the main water supply to your bathroom or entire home.
2. Remove Existing Fixtures: Carefully remove your current shower head and any other fixtures that will be replaced by the shower panel.
3. Inspect Plumbing: Ensure your existing hot and cold water lines are accessible and in good condition. This panel is designed for systems with existing hot and cold faucets.
4. Water-Saving Regulator: If your water pressure is naturally low, consider not installing any water-saving regulator that may be included with the panel, as it can further reduce flow. If you use the hang-on to the shower pipe method, access to the regulator may be limited after installation.

6.2 پینل لگانا

5. پوزیشننگ: Hold the shower panel against the wall in the desired position. Mark the locations for mounting brackets. Ensure the panel is level.
6. سوراخ ڈرل: Drill pilot holes at the marked locations. Insert wall anchors if necessary.
7. محفوظ بریکٹ: فراہم کردہ پیچ کا استعمال کرتے ہوئے بڑھتے ہوئے بریکٹ کو دیوار سے جوڑیں۔
8. پینل منسلکہ: The unit may include double-sided tape for securing it to the wall. Once applied, repositioning is difficult without replacing the tape. Carefully align and press the panel onto the brackets and tape.

6.3 Connecting Water Lines

9. ہوزز کو جوڑیں: Attach the flexible hot and cold water supply hoses from the shower panel to your existing hot and cold water outlets. Ensure all connections are tight to prevent leaks.
10. ہینڈ ہیلڈ شاور: Connect the handheld shower hose to its designated outlet on the panel.
11. پانی کو چالو کریں: Slowly turn the main water supply back on and check for any leaks. Tighten connections as needed.
12. Seal Edges (Optional but Recommended): Apply a bead of clear silicone caulk along the sides of the shower panel where it meets the tile to create a seal and prevent water intrusion.

Note: This shower panel does not include a temperature/volume control valve. Your existing shower valve will control water temperature and flow.

7. آپریٹنگ ہدایات

The Valore 7 shower panel features a 3-way diverter to control water flow to different functions.

7.1 پانی کے بہاؤ کا کنٹرول

Use your existing shower's hot and cold water handles to adjust the desired water temperature and overall flow rate.

7.2 Selecting Spray Modes

The panel has a control knob or lever to switch between the three spray modes:

• بارش کی بارش: Provides a wide, gentle rainfall-like spray from the overhead shower head.


Image 7.1: Valore 7 Shower Panel demonstrating the rain shower function.

• باڈی جیٹس: Delivers targeted streams of water from the integrated body massage jets.

Image 7.2: Valore 7 Shower Panel demonstrating the body jet function.
• ہینڈ ہیلڈ شاور: Directs water flow to the brass shower wand for focused rinsing or cleaning.

Rotate or move the diverter control to select your desired spray function. Only one function can be active at a time.

8 دیکھ بھال

8.1 صفائی

• Clean the stainless steel surface regularly with a soft cloth and mild soap or a non-abrasive stainless steel cleaner.
• Avoid using abrasive sponges, scouring pads, or harsh chemical cleaners, as these can scratch or damage the finish.
• For hard water spots, use a solution of white vinegar and water, then rinse thoroughly.
• Periodically clean the nozzles of the shower head and body jets to remove mineral buildup. You can often do this by gently rubbing the rubber nozzles.

8.2 عمومی نگہداشت

• Ensure all connections remain tight to prevent leaks.
• If any part becomes loose, gently tighten it. Do not overtighten.

9 خرابیوں کا سراغ لگانا

10. وارنٹی اور سپورٹ

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Valore customer service. Keep your proof of purchase for warranty claims.