Philips Lighting 5058131PN

Philips myLiving PONGEE LED اسپاٹ لائٹ (ماڈل 5058131PN) یوزر مینوئل

1. تعارف

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Philips myLiving PONGEE LED Spot Light, Model 5058131PN. Please read these instructions carefully before installation and retain them for future reference.

Philips myLiving PONGEE white LED Spot Light, angled view

Figure 1: Philips myLiving PONGEE LED Spot Light

The Philips myLiving PONGEE spot light is designed for indoor use in functional spaces such as bedrooms or living rooms. Its swivel head allows for adjustable light direction, providing illumination precisely where needed.

2. حفاظتی معلومات

چوٹ یا نقصان سے بچنے کے لیے ہمیشہ درج ذیل حفاظتی تدابیر پر عمل کریں:

  • برقی حفاظت: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Always disconnect power at the main fuse or circuit breaker before installation, maintenance, or bulb replacement.
  • صرف اندرونی استعمال: This product has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not install in bathrooms or other areas where it may be exposed to moisture.
  • بلب کی قسم: Use only GU10 LED bulbs as specified. Do not exceed the maximum wattage فکسچر پر اشارہ کیا گیا ہے۔
  • ہینڈلنگ: Do not touch the bulb immediately after use as it may be hot. Allow it to cool before handling.
  • صفائی: فکسچر کو نرم، خشک کپڑے سے صاف کریں۔ کھرچنے والے کلینر یا سالوینٹس کا استعمال نہ کریں۔

3. پیکیج کے مشمولات

تنصیب شروع کرنے سے پہلے تصدیق کریں کہ تمام اجزاء موجود ہیں:

  • Philips myLiving PONGEE LED Spot Light fixture (1 unit)
  • بڑھتے ہوئے ہارڈویئر (پیچ، وال پلگ)
  • ہدایت نامہ

نوٹ: A GU10 LED bulb is شامل نہیں اور الگ سے خریدنا ضروری ہے۔

Packaging box for Philips myLiving PONGEE LED Spot Light

شکل 2: مصنوعات کی پیکیجنگ

4. سیٹ اپ اور انسٹالیشن

This spot light is designed for surface mounting on ceilings or walls. Refer to the dimensions diagram for planning your installation.

Dimensional drawing of Philips myLiving PONGEE LED Spot Light showing measurements in millimeters

Figure 3: Product Dimensions (all measurements in mm)

  1. تنصیب کا علاقہ تیار کریں: Ensure the mounting surface is clean, dry, and structurally sound. Mark the desired mounting points based on the fixture's base.
  2. پاور منقطع کریں: Before starting any electrical work, turn off the power supply to the circuit at the main fuse box or circuit breaker.
  3. بیس ماؤنٹ کریں: Secure the fixture's mounting base to the ceiling or wall using the provided screws and wall plugs. Ensure it is firmly attached.
  4. وائر دی فکسچر: Connect the electrical wires from the ceiling/wall to the fixture's terminals. Follow the standard wiring color codes (e.g., Live to Live, Neutral to Neutral, Earth to Earth). Ensure all connections are secure.
  5. بلب انسٹال کریں: Insert a GU10 LED bulb (not included) into the socket by aligning the pins and twisting clockwise until secure.
  6. فکسچر باڈی منسلک کریں: Secure the main body of the spot light to the mounted base.
  7. بجلی کی بحالی: Once installation is complete and all connections are checked, restore power at the main fuse box or circuit breaker.

5. آپریٹنگ ہدایات

The Philips myLiving PONGEE LED Spot Light is operated via a standard wall switch connected to its electrical circuit.

  • آن/آف کرنا: Flip the wall switch to the 'ON' position to illuminate the spot light. Flip it to the 'OFF' position to turn it off.
  • روشنی کی سمت کو ایڈجسٹ کرنا: The spot light features a swivel head. Gently adjust the light head to direct the beam to your desired area. Avoid excessive force when adjusting.

6 دیکھ بھال

  • صفائی: Ensure the power is off and the fixture is cool before cleaning. Wipe the exterior with a soft, dry, lint-free cloth. Do not use liquid cleaners, aerosols, or abrasive materials.
  • بلب کی تبدیلی:
    1. سرکٹ بریکر پر بجلی کی فراہمی بند کر دیں۔
    2. Allow the bulb to cool completely.
    3. Gently twist the old GU10 bulb counter-clockwise to remove it from the socket.
    4. Insert a new GU10 LED bulb by aligning the pins and twisting clockwise until secure.
    5. بجلی بحال کریں۔

7 خرابیوں کا سراغ لگانا

مسئلہممکنہ وجہحل
لائٹ آن نہیں ہوتی۔
  • بجلی کی فراہمی نہیں ہے۔
  • بلب خراب ہے یا درست طریقے سے انسٹال نہیں ہوا ہے۔
  • ڈھیلا وائرنگ کنکشن۔
  • سرکٹ بریکر یا فیوز چیک کریں۔
  • Ensure the wall switch is ON.
  • Replace the bulb with a new GU10 LED bulb.
  • Consult a qualified electrician to check wiring connections.
ہلکی ہلکی ہلکی۔
  • ڈھیلا بلب کنکشن۔
  • غیر موازن مدھم سوئچ (اگر قابل اطلاق ہو)۔
  • ناقص بلب۔
  • Ensure the bulb is securely twisted into the socket.
  • If using a dimmer, ensure it is compatible with LED bulbs.
  • بلب کو تبدیل کریں۔

8. وضاحتیں

  • برانڈ: فلپس لائٹنگ
  • ماڈل نمبر: 5058131 پی این
  • پروڈکٹ کے طول و عرض (L x W x H): 10 x 13.8 x 8.2 سینٹی میٹر
  • آئٹم کا وزن: 345 گرام
  • مواد: دھات
  • رنگ: سفید
  • انداز: جدید
  • روشنی کے منبع کی قسم: ایل ای ڈی
  • Bulb Socket Type: جی یو 10
  • بلب کی تعداد: 1 (bulb not included)
  • ان پٹ جلدtage: 220-240 وولٹ
  • طاقت کا منبع: Electrical cable (wired)
  • تنصیب کی قسم: Surface Mount (Ceiling/Wall)
  • آئی پی کی درجہ بندی: IP20 (صرف اندرونی استعمال)
  • خصوصی خصوصیات: Energy-efficient, Swivel head
  • مخصوص استعمال: گھر، بیڈروم، لونگ روم

9. وارنٹی اور سپورٹ

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Philips Lighting webسائٹ آپ مدد کے لیے اپنے خوردہ فروش سے بھی رابطہ کر سکتے ہیں۔

کسی بھی وارنٹی دعووں کے لیے اپنی خریداری کا ثبوت رکھیں۔

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.