Tekonsha 118756

Tekonsha T-One® T-Connector Harness (Model 118756) Instruction Manual

For Select Toyota C-HR Vehicles

1. تعارف

This manual provides detailed instructions for the proper installation, operation, and maintenance of the Tekonsha T-One® T-Connector Harness, Model 118756. This product is designed to provide a 4-way flat trailer wiring connection for select Toyota C-HR vehicles, enabling trailer lighting functions without cutting or splicing vehicle wires.

2. حفاظتی معلومات

  • بجلی کے جھٹکے یا گاڑی کے برقی نظام کو پہنچنے والے نقصان کو روکنے کے لیے کوئی بھی برقی تنصیب شروع کرنے سے پہلے گاڑی کی بیٹری کو ہمیشہ منقطع کریں۔
  • یقینی بنائیں کہ شارٹ سرکٹ کو روکنے کے لیے تمام کنکشن محفوظ اور مناسب طریقے سے موصل ہیں۔
  • نقصان سے بچنے کے لیے گرم سطحوں، تیز کناروں، اور حرکت پذیر حصوں سے دور راستے کی وائرنگ۔
  • کھینچنے سے پہلے تمام ٹریلر لائٹس کے مناسب کام کی تصدیق کریں۔
  • اگر آپ کو انسٹالیشن کے عمل کے کسی بھی مرحلے کے بارے میں یقین نہیں ہے تو، ایک قابل آٹوموٹیو ٹیکنیشن سے مشورہ کریں۔

3. پیکیج کے مشمولات

تنصیب شروع کرنے سے پہلے تصدیق کریں کہ تمام اجزاء موجود ہیں:

  • Tekonsha T-One® T-Connector Harness with integrated control module
  • 4-Way Flat Connector
  • Power wire with fuse holder and fuse
  • رنگ ٹرمینل کے ساتھ زمینی تار
  • Assorted zip ties
  • بٹ کنیکٹر
Tekonsha T-One T-Connector Harness components laid out
Figure 1: All components included in the Tekonsha T-One T-Connector Harness kit. This image displays the main harness with its control module, various vehicle-specific connectors, a 4-way flat trailer connector, power wire with fuse, ground wire, and an assortment of zip ties and electrical connectors.
Tekonsha T-One T-Connector Harness product packaging
Figure 2: The retail packaging for the Tekonsha T-One T-Connector Harness, Model 118756. The box highlights key features such as "Easy to Install" and "No cutting, splicing or taping of vehicle wires."

4. سیٹ اپ اور انسٹالیشن

The Tekonsha T-One® T-Connector Harness is designed for a "Plug & Play" installation, requiring no cutting, splicing, or taping of your vehicle's wires. The installation process typically involves accessing the vehicle's taillight wiring harness.

  1. گاڑی تیار کریں: یقینی بنائیں کہ گاڑی بند ہے اور پارکنگ بریک لگی ہوئی ہے۔ گاڑی کی بیٹری کے منفی ٹرمینل کو منقطع کریں۔
  2. ٹیل لائٹ وائرنگ تک رسائی: Depending on your Toyota C-HR model, you may need to remove interior trim panels or access panels in the trunk or cargo area to reach the taillight wiring harness connectors. Refer to your vehicle's owner's manual for specific panel removal instructions.
  3. Locate Vehicle Harness: Identify the vehicle's taillight wiring harness connectors. These are typically located behind the taillight assemblies.
  4. ٹی کنیکٹرز کو جوڑیں: Unplug the vehicle's existing taillight harness connector. Insert the corresponding Tekonsha T-Connector into the vehicle's harness, ensuring a secure connection. Then, plug the vehicle's original harness into the other end of the Tekonsha T-Connector. Repeat this process for both sides of the vehicle if applicable.
  5. Mount Control Module: Find a secure, dry location within the vehicle's cargo area or behind the trim panels to mount the control module. Use the provided zip ties or double-sided tape (not included) to secure it, ensuring it is away from moving parts or areas prone to moisture.
  6. Connect Power Wire: Route the power wire from the control module to the vehicle's battery. This may involve routing it through the vehicle's interior and firewall. Connect the fuse holder in-line near the battery, but do not insert the fuse until all connections are complete. Connect the power wire to the positive terminal of the battery.
  7. زمینی تار جوڑیں: Connect the white ground wire from the control module to a clean, unpainted metal surface on the vehicle's chassis using the provided ring terminal and a self-tapping screw. Ensure a good electrical ground.
  8. روٹ 4-وے فلیٹ کنیکٹر: Route the 4-way flat connector to the exterior of the vehicle, typically near the trailer hitch. Secure it using zip ties, ensuring it is protected from road debris and heat.
  9. حتمی جانچ پڑتال: Reconnect the vehicle's battery. Insert the fuse into the fuse holder. Test all trailer light functions (turn signals, brake lights, running lights) with a trailer or a trailer light tester before reassembling any removed trim panels.

5. آپریٹنگ ہدایات

Once installed, the Tekonsha T-One® T-Connector Harness provides a standard 4-way flat connector for your trailer. To operate:

  • Connect your trailer's 4-way flat plug to the vehicle's 4-way flat connector.
  • Ensure the connection is secure and free from dirt or corrosion.
  • Verify that all trailer lights (running lights, turn signals, brake lights) are functioning correctly before driving.
  • When not in use, protect the 4-way flat connector with a dust cap (if provided or purchased separately) to prevent corrosion.

6 دیکھ بھال

Minimal maintenance is required for the T-One® T-Connector Harness:

  • Periodically inspect the 4-way flat connector for dirt, corrosion, or damage. Clean with electrical contact cleaner if necessary.
  • Check all wiring for signs of wear, fraying, or loose connections, especially where wires pass through grommets or along the chassis.
  • Ensure the control module remains securely mounted in a dry location.

7 خرابیوں کا سراغ لگانا

If you experience issues with your trailer lights, consider the following troubleshooting steps:

  • کوئی ٹریلر لائٹس نہیں:
    • Check the fuse in the in-line fuse holder connected to the vehicle's battery. Replace if blown.
    • Ensure the vehicle's battery is properly reconnected and charged.
    • Verify all T-Connector connections are fully seated and secure.
    • Check the ground wire connection for corrosion or looseness. Ensure it is connected to a clean, unpainted metal surface.
    • Inspect the 4-way flat connector for dirt, corrosion, or bent pins.
  • Specific Trailer Light Not Working (e.g., only turn signals, no brake lights):
    • Check the corresponding bulb on the trailer.
    • Inspect the wiring on the trailer itself for damage or loose connections.
    • Verify the vehicle's taillights are functioning correctly.
  • Fuses Blow Repeatedly: This indicates a short circuit. Carefully inspect all wiring for pinched, cut, or exposed wires. Ensure the control module is not damaged.

If troubleshooting steps do not resolve the issue, contact Tekonsha customer support or a qualified automotive electrician.

8. وضاحتیں

فیچرتفصیل
برانڈٹیکونشا
ماڈل نمبر118756
کنیکٹر کی قسم4-way Flat
وائر گیج16 Gauge Bonded Wire
Stop/Turn Circuit Capacity5 Amps
Taillight Circuit Capacity7.5 Amps
موادپولی وینائل کلورائد (PVC)
آئٹم کے طول و عرض (L x W x H)7 x 5 x 3.72 انچ
شے کا وزنتقریباً 1.96 پاؤنڈ
یو پی سی016118106886

9. وارنٹی اور سپورٹ

Tekonsha products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official Tekonsha website. For technical assistance or support, please contact Tekonsha customer service.

ٹیکونشا Webسائٹ: www.tekonsha.com

© 2023 Tekonsha. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.