Graco FinishPro HVLP 7.0 Standard Sprayer User Manual

1. حفاظتی معلومات

انتباہ: چوٹ کے خطرے کو کم کرنے کے لیے، صارف کو اس پروڈکٹ کو استعمال کرنے سے پہلے اس ہدایت نامہ کو پڑھنا اور سمجھنا چاہیے۔

• Avoid eye contact with spray.
• ہوادار علاقے میں استعمال کریں۔
• Wear appropriate protective gear, including eye protection, gloves, and a respirator.
• Dispose of chemicals and materials properly according to local regulations.
• صفائی یا دیکھ بھال کرنے سے پہلے ہمیشہ بجلی منقطع کریں۔
• یقینی بنائیں کہ آپریشن سے پہلے تمام کنکشن محفوظ ہیں۔

2. پروڈکٹ ختمview

The Graco FinishPro HVLP 7.0 Standard Sprayer (Model 17N263) is designed for precise application of various coatings, offering control and a high-quality finish. Key features include:

• Ultimate Control: Ideal for projects requiring fine finish.
• سوئی کا نظام: Includes a #3 size (1.3mm) needle, suitable for lacquers, stains, enamels, epoxies, urethane, and varnish. Needles are easily interchangeable.
• FlexLiner Bag System: Designed for lighter weight, easy cleanup, and ability to spray in any direction, including upside down. Facilitates quick color changes.
• Super-Flex Air Hose: 15% lighter than comparable hoses for improved control.
• TurboControl System: Allows adjustment of the TurboForce turbine speed to match performance requirements.
• EDGE II Gun: Features a 75% lighter trigger pull with EasyGlide technology.
• Standard Filtration System: Washable filter extends motor life and ensures a quality finish.

Figure 2.1: Graco FinishPro HVLP 7.0 Standard Sprayer unit.

Figure 2.2: The EDGE II Spray Gun with the FlexLiner cup system.

3. سیٹ اپ

3.1 پیک کھولنا اور معائنہ کرنا

1. پیکیجنگ سے تمام اجزاء کو احتیاط سے ہٹا دیں۔
2. Inspect all parts for any damage that may have occurred during shipping. Do not operate if damaged.
3. تصدیق کریں کہ "باکس میں کیا ہے" سیکشن میں درج تمام اجزاء موجود ہیں۔

3.2 اسمبلی

1. Connect the Super-Flex Air Hose to the HVLP unit and the EDGE II spray gun. Ensure connections are tight.
2. Attach the FlexLiner cup to the spray gun.
3. Select the appropriate needle for your material. The #3 (1.3mm) needle is included for fine finishes.
4. Ensure the filter is clean and properly installed in the unit.

Figure 3.1: The compact design allows for easy transport of the unit.

4. آپریٹنگ ہدایات

4.1 مواد کی تیاری

1. Ensure your coating material is properly mixed and free of debris.
2. Pour the prepared material into the FlexLiner bag within the cup. Do not overfill.

4.2 ترتیبات کو ایڈجسٹ کرنا

1. Turn on the HVLP unit.
2. Use the TurboControl System dial to adjust the turbine speed. Higher speeds are generally for thicker materials or faster application.
3. Adjust the material flow knob on the EDGE II gun to control the amount of material being sprayed.
4. Test the spray pattern on a scrap piece of material to ensure desired coverage and finish.

Figure 4.1: Adjust the material flow and air cap for optimal spray pattern.

4.3 چھڑکنے کی تکنیک

• Maintain a consistent distance from the surface (typically 6-10 inches).
• Move the gun in smooth, even passes, overlapping each pass by about 50%.
• ضرورت سے زیادہ مواد جمع ہونے سے بچنے کے لیے ہر پاس کے آخر میں ٹرگر جاری کریں۔
• The FlexLiner system allows spraying at various angles, including upside down, for hard-to-reach areas.

Figure 4.2: Maintain consistent motion for an even finish.

Figure 4.3: The FlexLiner system enables spraying in any direction, including upside down.

4.4 Changing Needles and Colors

• To change needles, ensure the unit is off and depressurized. Follow the gun's instructions for needle removal and insertion.
• For quick color changes, remove the current FlexLiner bag and replace it with a new one containing the desired color. This minimizes cleanup between colors.

Figure 4.4: Needles can be changed with a simple click mechanism.

4.5 آفیشل پروڈکٹ ویڈیوز

5 دیکھ بھال

5.1 سپرےر کی صفائی

1. After each use, disconnect the power.
2. Remove the FlexLiner bag and dispose of any remaining material properly.
3. Clean the spray gun thoroughly with appropriate cleaning solution (water for latex, solvent for oil-based paints).
4. Clean the needle and air cap.
5. Rinse the FlexLiner cup if reusing, or dispose of it.
6. Clean the exterior of the HVLP unit.

5.2 فلٹر کی دیکھ بھال

• Regularly inspect the standard filtration system filter.
• Clean the washable filter as needed to maintain optimal airflow and prevent motor strain.
• Replace the filter if it shows signs of damage or excessive wear.

6 خرابیوں کا سراغ لگانا

7. وضاحتیں

• ماڈل کا نام: FinishPro HVLP 7.0 Standard Series
• ماڈل نمبر: 17N263
• برانڈ: گراکو
• ٹانک حجم: 1 کوارٹ
• رنگ: نیلا
• مواد: یوریتھین
• آئٹم کا وزن: 18 پاؤنڈز
• نلی کی لمبائی: 240 Inches (20 ft)
• طاقت کا منبع: Electric (120V AC, 11 A)
• زیادہ سے زیادہ دباؤ: 7 psi
• نوزل سائز: 1.3mm / 0.051 in (#3 needle)
• زیادہ سے زیادہ بہاؤ: 65 سی ایف ایم
• Pattern Size: 1/4 انچ سے 12 انچ
• شامل اجزاء: Instruction Guide, EDGE II Spray Gun
• طول و عرض (W x H): 13.25"W x 14"H

Figure 7.1: Approximate dimensions of the HVLP unit.

8. وارنٹی اور سپورٹ

The Graco FinishPro HVLP 7.0 Standard Sprayer comes with a 3 سال کی محدود وارنٹی. For warranty claims, technical support, or replacement parts, please refer to the contact information provided in the included Instruction Guide or visit the official Graco webسائٹ

واپسی کی پالیسی: This product is eligible for a 30-day refund/replacement policy from the seller (Amazon).