AVANTEK CW-11 Wireless Doorbell Instruction Manual

1. تعارف

Thank you for choosing the AVANTEK CW-11 Wireless Doorbell. This manual provides detailed instructions for the installation, operation, and maintenance of your new doorbell system. Please read this manual thoroughly before use and retain it for future reference.

2. پیکیج کے مشمولات

تصدیق کریں کہ پیکیج میں تمام اجزاء موجود ہیں:

• 1 ایکس پلگ ان وصول کنندہ
• 1 x Transmitter (Push Button)
• 2 ایکس پیچ
• 2 ایکس وال اینکرز
• 1 x Small Key (for battery compartment)
• 1 ایکس ڈبل رخا چپکنے والی ٹیپ
• 1 ایکس صارف دستی

Image: Contents of the AVANTEK Doorbell Kit, showing the receiver, transmitter, screws, anchors, key, and adhesive tape.

3. پروڈکٹ ختمview

وصول کنندہ

• Plug-in design for easy power.
• LED indicator for visual alerts.
• والیوم کنٹرول کے بٹن۔
• Melody selection buttons.
• Compact design (approx. 8 cm height, 7.3 cm width) that does not obstruct adjacent power outlets.

Image: The compact receiver plugged into a wall outlet, illustrating its small size (8 cm height, 7.3 cm width) and how it leaves adjacent sockets free.

ٹرانسمیٹر

• Push button with LED indicator.
• Powered by a CR2032 lithium battery (included), offering up to 3 years of lifespan.
• IP55 dustproof and waterproof rating, suitable for outdoor use in temperatures from -20°C to +60°C.

Image: The doorbell transmitter highlighting its IP55 dustproof and waterproof features, with illustrations of its resilience in both cold (-20°C) and hot (60°C) weather, and a 3-year maximum battery lifespan.

4. سیٹ اپ

4.1 ٹرانسمیٹر کی تنصیب

The transmitter can be installed using either the provided screws and anchors or the double-sided adhesive tape.

1. چپکنے والی ٹیپ کا طریقہ: Clean the desired mounting surface thoroughly. Peel off one side of the protective film from the double-sided adhesive tape and attach it to the back of the transmitter. Peel off the other side and firmly press the transmitter onto the wall for at least 30 seconds.
2. Screw-in Method: Mark the desired mounting location. Drill two holes at the marked spots. Insert the wall anchors into the holes. Align the transmitter's mounting holes with the anchors and secure it with the screws.

4.2 وصول کنندہ سیٹ اپ

Simply plug the receiver into any standard indoor power outlet. The receiver's LED will flash, indicating it is powered on and ready for pairing.

4.3 ٹرانسمیٹر اور وصول کنندہ کو جوڑنا

The doorbell system is pre-paired at the factory. If re-pairing is needed or if you are adding additional transmitters/receivers:

1. رسیور میں پلگ ان کریں۔
2. Press and hold the volume button on the receiver for 3 seconds until its LED starts flashing. This indicates pairing mode.
3. Within 5 seconds, press the transmitter button. The receiver's LED will flash, and it will play its current melody once, indicating successful pairing.
4. اگر جوڑا بنانا ناکام ہوجاتا ہے تو، اقدامات کو دہرائیں۔

5. آپریشن

5.1 Changing Melodies

The receiver offers 52 distinct melodies. To change the melody:

• Press the 'Next' or 'Previous' button on the side of the receiver to cycle through the available melodies.
• The receiver will play each melody as you select it.
• The memory function ensures your last selected melody is retained even after a power outage.

Image: The doorbell receiver displaying its features: 52 chimes and tunes, 5 volume levels, and an LED indicator. Examples of melodies like 'Canon' and 'Ding-Dong' are shown.

5.2 والیوم کو ایڈجسٹ کرنا

The receiver has 5 adjustable volume levels, with a maximum sound intensity of 115 dB. To adjust the volume:

• Press the 'Volume' button on the side of the receiver repeatedly to cycle through the 5 volume levels.
• The receiver will play a sound at each level to indicate the current volume.
• The memory function retains your last selected volume level.

5.3 Silent Mode (LED Notification)

For situations requiring silence, such as during sleep or meetings, the receiver can be set to silent mode, where it only provides a visual LED notification.

• Cycle through the volume levels until the mute icon is displayed or the sound is off. The LED will still flash when the doorbell is pressed.

Image: The doorbell receiver illustrating its silent LED notification mode and the range of 5 adjustable volume levels (0-115 dB), with examples of typical sound environments.

6 دیکھ بھال

6.1 بیٹری کی تبدیلی (ٹرانسمیٹر)

The transmitter uses a CR2032 lithium battery with an average lifespan of 3 years. When the transmitter's LED no longer lights up or the range decreases significantly, it's time to replace the battery.

1. Use the small key (or a small flat-head screwdriver) to open the battery compartment on the side of the transmitter.
2. پرانی CR2032 بیٹری کو احتیاط سے ہٹا دیں۔
3. ایک نئی CR2032 بیٹری داخل کریں جس کا مثبت (+) رخ اوپر ہو۔
4. بیٹری کے ڈبے کو محفوظ طریقے سے بند کریں۔

6.2 صفائی

Wipe the doorbell units with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the surface.

7 خرابیوں کا سراغ لگانا

8. وضاحتیں

• ماڈل: CW-11 / SB-122
• برانڈ: ایوانٹیک۔
• وائرلیس رینج: کھلی ہوا میں 300 میٹر (1000 فٹ) تک
• دھنیں: 52 سلیکٹ ایبل چائمز
• حجم کی سطحیں: 5 adjustable levels (0-115 dB)
• ٹرانسمیٹر بیٹری: 1 x CR2032 لتیم (شامل)
• Transmitter Battery Life: 3 سال تک
• وصول کرنے کی طاقت: AC 100-240V (پلگ ان)
• آپریٹنگ درجہ حرارت: -20°C سے +60°C (-4°F سے +140°F)
• پنروک درجہ بندی: IP55 (ٹرانسمیٹر)
• سرٹیفیکیشنز: عیسوی، ایف سی سی، RoHS
• طول و عرض (رسیور): تقریباً 11.4 x 9.5 x 6.9 سینٹی میٹر
• وزن: 159 گرام (کل پیکج)
• تنصیب کا طریقہ: Self-adhesive or Screw-in

Image: Diagram illustrating the 300-meter (1000 ft) wireless range of the AVANTEK doorbell system within a multi-story home environment.

9. وارنٹی اور سپورٹ

AVANTEK products come with a standard manufacturer's warranty. For specific warranty details, technical support, or any inquiries, please refer to the contact information provided on the product packaging or visit the official AVANTEK website. Please note that compatibility for products purchased before 2021 may vary; contact customer support for verification.