کسٹم ڈائنامکس PB-45-C پروبیم ایل ای ڈی پاسنگ ایلampصارف دستی

1. تعارف

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Custom Dynamics PB-45-C 4.5in. Probeam LED Passing Lamps. These modern LED passing lamps are designed to enhance visibility and safety for your motorcycle.

2. پروڈکٹ ختمview

The Custom Dynamics PB-45-C Probeam LED Passing Lamps feature a modern design with high lumen output for superior illumination. They are engineered for plug-and-play installation on most models.

اہم خصوصیات:

• Modern LED passing lamp ڈیزائن
• 500 لیمن آؤٹ پٹ
• پلگ اینڈ پلے انسٹالیشن
• پنروک تعمیر

Figure 2.1: Custom Dynamics PB-45-C Probeam LED Passing Lamps یہ ایلamps feature a sleek, round design with a chrome finish and clear lens, showcasing the internal LED components.

3. حفاظتی معلومات

انتباہ: یہ پروڈکٹ آپ کو سیسہ سمیت کیمیکلز سے بے نقاب کر سکتی ہے، جو ریاست کیلیفورنیا میں کینسر اور پیدائشی نقائص یا دیگر تولیدی نقصان کا سبب بنتی ہے۔ مزید معلومات کے لیے پر جائیں۔ www.P65Warnings.ca.gov.

Always ensure the vehicle's power is disconnected before installation. Consult a qualified technician if you are unsure about any installation steps. Wear appropriate safety gear during installation.

4. سیٹ اپ اور انسٹالیشن

The PB-45-C lamps are designed for plug-and-play installation. Follow these general steps for installation:

1. Ensure the motorcycle's ignition is off and the battery is disconnected to prevent electrical shorts.
2. Carefully remove the existing passing lamps from your motorcycle, if applicable.
3. Connect the Custom Dynamics PB-45-C lamps to the motorcycle's wiring harness. For models manufactured before 2004, an adapter (part number 2001-1266) is required and sold separately.
4. Securely mount the new LED passing lamps in the designated locations.
5. Reconnect the battery and test the functionality of the new lamps.
6. ایل کو ایڈجسٹ کریں۔amp angle for optimal beam pattern and visibility.

For detailed vehicle-specific instructions, refer to your motorcycle's service manual.

5. آپریشن

Once installed, the Probeam LED Passing Lamps operate in conjunction with your motorcycle's existing lighting system. They are designed to provide additional forward and side illumination, enhancing your visibility to other road users and improving your view سڑک کے.

• Turn on your motorcycle's ignition and headlight switch to activate the passing lamps.
• Ensure both lampصحیح طریقے سے روشن کرتا ہے۔
• Periodically check the alignment of the lamps to ensure they are providing optimal light distribution without blinding oncoming traffic.

6 دیکھ بھال

The Custom Dynamics PB-45-C LED Passing Lamps require minimal maintenance due to their durable LED technology and waterproof design.

• صفائی: لینز کو نرم سے صاف کریں، ڈیamp cloth and mild soap. Avoid abrasive cleaners or solvents that could damage the lens or housing.
• معائنہ: Periodically inspect the wiring and connections for any signs of wear, corrosion, or damage. Ensure mounting hardware remains secure.
• پنروک مہر: Do not attempt to open the sealed lamp housing, as this will compromise its waterproof integrity and void the warranty.

7 خرابیوں کا سراغ لگانا

8. وضاحتیں

9. وارنٹی اور سپورٹ

For warranty information and technical support, please contact Custom Dynamics directly. Refer to their official webموجودہ رابطے کی تفصیلات اور وارنٹی پالیسی کے لیے سائٹ یا مصنوعات کی پیکیجنگ۔

Webسائٹ: www.customdynamics.com