YAESU SBH-28 Desktop Rapid Charger Instruction Manual

1. تعارف

The YAESU SBH-28 is a desktop rapid charger designed for use with the YAESU FT-70DR handheld transceiver and its compatible battery packs. This charger provides a convenient and efficient method for recharging your radio's battery, ensuring your device is always ready for operation. It requires an external AC adapter (such as SAD-18B, SAD-24B, or SAD-25B, typically supplied with the radio) or a 12V DC adapter (SDD-13) for power.

2. حفاظتی معلومات

• Use only the specified YAESU AC adapters (SAD-18B, SAD-24B, SAD-25B) or the SDD-13 12V DC adapter. Using an incorrect power adapter may damage the charger or the radio and could pose a fire hazard.
• چارجر کو پانی یا نمی کے سامنے نہ رکھیں۔
• چارجر کو الگ کرنے یا اس میں ترمیم کرنے کی کوشش نہ کریں۔ تمام خدمات کو اہل اہلکاروں سے رجوع کریں۔
• Ensure the charger is placed on a stable, flat surface away from direct sunlight and heat sources.
• بچوں کی پہنچ سے دور رکھیں۔

3. پیکیج کے مشمولات

تصدیق کریں کہ آپ کے پیکیج میں درج ذیل آئٹم ہیں:

• YAESU SBH-28 Desktop Rapid Charger Unit

نوٹ: The necessary AC power adapter (e.g., SAD-18B, SAD-24B, SAD-25B) or DC adapter (SDD-13) is شامل نہیں with the SBH-28 charger and must be acquired separately or used from your FT-70DR radio's original accessories.

4. سیٹ اپ

1. پاور اڈاپٹر کو جوڑیں: Insert the barrel connector of your compatible AC or DC power adapter into the DC IN jack located on the rear of the SBH-28 charger.
2. پاور ماخذ سے رابطہ کریں: Plug the AC adapter into a standard wall outlet, or the DC adapter into a compatible 12V DC power source.

This image displays the Yaesu SBH-28 Desktop Rapid Charger. It is a compact, black plastic unit with a recessed area shaped to securely hold a Yaesu FT-70DR radio or its battery pack for charging. The charger features a power input port on the rear for connection to an external AC or DC adapter.

5. آپریٹنگ ہدایات

To charge your FT-70DR radio or its battery pack:

1. Ensure the SBH-28 charger is properly connected to a power source as described in the Setup section.
2. Carefully place the FT-70DR radio (with its battery attached) or a standalone battery pack into the charging cradle. Ensure the contacts on the battery/radio align with the charging terminals in the SBH-28. The radio or battery should sit securely in the cradle.
3. Refer to your FT-70DR radio's instruction manual for details on the charging indicator light behavior (e.g., color changes, blinking patterns) to confirm charging status. The SBH-28 facilitates rapid charging.
4. Once the battery is fully charged, remove the radio or battery pack from the cradle.

6 دیکھ بھال

• Keep the charging contacts clean and free of dust or debris. Use a dry, soft cloth to wipe them if necessary.
• Do not use harsh chemicals or abrasive cleaners on the charger.
• Store the charger in a dry environment when not in use.

7 خرابیوں کا سراغ لگانا

• Charger not powering on or radio not charging:
  • Verify that the power adapter is securely connected to both the SBH-28 and the wall outlet/DC source.
  • Ensure you are using a compatible YAESU power adapter (SAD-18B, SAD-24B, SAD-25B, or SDD-13). Incorrect adapters may not provide sufficient power or may have incorrect voltage/polarity.
  • Check the power outlet or DC source for functionality.
  • Ensure the radio or battery pack is correctly seated in the cradle, making proper contact with the charging terminals.
• Charging indicator light flickers or shows inconsistent status:
  • This can sometimes occur if the radio or battery is not perfectly seated. Try re-seating the radio/battery in the cradle.
  • Ensure the power adapter connection is firm.
  • Consult your FT-70DR radio's manual for specific interpretations of indicator light behavior.

8. وضاحتیں

9. وارنٹی اور سپورٹ

For warranty information and technical support, please refer to the documentation provided with your original YAESU FT-70DR radio or visit the official YAESU webسائٹ وارنٹی دعووں کے لیے خریداری کے ثبوت کے طور پر اپنی خریداری کی رسید رکھیں۔