Zerone TPA3116D2 Digital Ampلائفئیر بورڈ صارف دستی

1. پروڈکٹ ختمview

The Zerone TPA3116D2 is a high-power 2.1 channel digital audio amplifier board designed for various audio applications. It features two TPA3116D2 amplifier chips, providing a total output of 80W x 2 for stereo channels and 100W for the subwoofer channel. This module operates on a DC 12-26V power supply and offers adjustable volume, bass, and stereo controls for a customized audio experience.

2 خصوصیات

• Dual TPA3116D2 Chips: Integrates two TPA3116D2 digital amplifier chips for stable and reliable performance.
• 2.1 Channel Output: Provides 80W x 2 (stereo) + 100W (subwoofer) high-power output.
• وسیع جلدtagای رینج: Compatible with DC 12-26V power input.
• ہائی سگنل ٹو شور کا تناسب: Achieves 100 decibels signal-to-noise ratio for clear audio quality.
• سایڈست کنٹرول: Independent volume, bass, and stereo (treble) adjustment knobs.
• پائیدار تعمیر: Built with premium materials for practical and long-lasting use.

تصویر 2.1: ختمview کی amplifier board highlighting the dual TPA3116D2 chips.

3. حفاظتی معلومات

• بجلی کی فراہمی والیوم کو یقینی بنائیںtage is within the specified DC 12-26V range. Exceeding this range can damage the device.
• Always disconnect power before making any connections or disconnections to prevent electrical shock or damage.
• کو بے نقاب کرنے سے گریز کریں۔ amplifier board to moisture, water, or extreme temperatures.
• Do not touch the components on the board while it is powered on, especially the heatsink, as it may become hot.
• ڈیوائس کو بچوں سے دور رکھیں۔
• کے ارد گرد مناسب وینٹیلیشن کو یقینی بنائیں amplifier board during operation.

4. پیکیج کے مشمولات

براہ کرم وصولی کے بعد پیکیج کے مواد کو چیک کریں۔ معیاری پیکیج میں شامل ہیں:

• Zerone TPA3116D2 Digital Amplifier Board (1 unit)
• (Note: Additional cables or power supply may not be included and must be purchased separately.)

5. پروڈکٹ ڈایاگرام اور اجزاء

Familiarize yourself with the various components and connection points on the ampلائف بورڈ

تصویر 5.1: اوپر view کی ampلائف بورڈ

• 1. POWER Input: DC 12-26V power supply connection.
• 2. ان پٹ: Audio signal input (e.g., from a smartphone, PC, or MP3 player).
• 3. VOL (Volume): ماسٹر والیوم کنٹرول نوب۔
• 4. باس: Bass frequency adjustment knob.
• 5. STERE (Stereo/Treble): Stereo channel (treble) adjustment knob.
• 6. +OUTL-: Left channel speaker output terminals.
• 7. +OUTR-: Right channel speaker output terminals.
• 8. +BASS-: Subwoofer speaker output terminals.

تصویر 5.2: نیچے view کی amplifier board, showing mounting points and solder pads.

6. سیٹ اپ ہدایات

Follow these steps to correctly set up your ampلائفائر بورڈ:

1. پاور سپلائی کنکشن: Connect a DC 12-26V power supply to the "POWER" input terminals. Ensure correct polarity (+ to + and - to -). A power supply with sufficient current capacity (e.g., 5A or higher for full power) is recommended.
2. آڈیو ان پٹ کنکشن: Connect your audio source (e.g., smartphone, PC, MP3 player) to the "INPUT" jack using an appropriate audio cable.
3. اسپیکر کنکشن:
   • Connect your left speaker to the "+OUTL-" terminals.
   • Connect your right speaker to the "+OUTR-" terminals.
   • Connect your subwoofer to the "+BASS-" terminals.
   Ensure all speaker connections have correct polarity (+ to + and - to -) to avoid phase issues and ensure optimal sound quality.
4. Initial Knob Settings: Before powering on, set the VOL, BASS, and STERE knobs to their minimum positions to prevent sudden loud sounds.
5. پاور آن: Once all connections are secure, connect the power supply to a wall outlet. The board should power on.

7. آپریٹنگ ہدایات

After successful setup, follow these steps to operate the ampزندہ:

1. حجم کو ایڈجسٹ کریں: Slowly turn the "VOL" knob clockwise to increase the master volume to your desired listening level.
2. باس کو ایڈجسٹ کریں: Use the "BASS" knob to increase or decrease the low-frequency output for the subwoofer and main channels.
3. Adjust Stereo (Treble): Use the "STERE" knob to adjust the high-frequency output for the left and right stereo channels.
4. بجلی بند: کو آف کرنے کے لیے amplifier, disconnect the power supply. It is recommended to turn the volume down before powering off.

Image 7.1: Control knobs for volume, bass, and stereo adjustment.

8 دیکھ بھال

مناسب دیکھ بھال آپ کی لمبی عمر اور بہترین کارکردگی کو یقینی بناتی ہے۔ ampلائفائر بورڈ:

• صفائی: Use a soft, dry cloth to gently wipe the surface of the board. Do not use liquid cleaners or solvents.
• دھول ہٹانا: Periodically use compressed air to remove dust from components and heatsinks to maintain proper cooling.
• ذخیرہ: When not in use for extended periods, store the board in a dry, cool environment, away from direct sunlight and moisture.
• معائنہ: Periodically inspect connections for looseness or corrosion.

9 خرابیوں کا سراغ لگانا

اگر آپ کو اپنے ساتھ مسائل کا سامنا کرنا پڑتا ہے۔ amplifier board, refer to the following troubleshooting guide:

10. وضاحتیں

11. وارنٹی اور سپورٹ

Specific warranty information for this product is not provided in the available documentation. For warranty claims, technical support, or further assistance, please contact your retailer or the manufacturer, Zerone, directly through their official support channels. Please retain your proof of purchase for any warranty-related inquiries.

آپ اکثر خوردہ فروش پر رابطہ کی معلومات حاصل کر سکتے ہیں۔ website or by searching for "Zerone official support" online.