شیلنبرگ 70988

Schellenberg 70988 Basic Window Mosquito Screen 120 x 140 cm Instruction Manual

تعارف

This manual provides detailed instructions for the assembly, installation, and maintenance of your Schellenberg Basic Window Mosquito Screen, model 70988. This kit is designed to protect your home from insects while allowing fresh air circulation. It features a high-quality fiberglass fabric and a robust aluminum frame, suitable for various window types, including those with roller shutters.

حفاظتی ہدایات

  • Always read and understand all instructions before beginning assembly or installation.
  • Use appropriate safety gear, such as gloves, when handling tools and materials.
  • Keep small components out of reach of children to prevent choking hazards.
  • یقینی بنائیں کہ کام کا علاقہ صاف اور اچھی طرح سے روشن ہے۔
  • مصنوعات میں کسی بھی طرح سے ترمیم نہ کریں جو اس دستی میں بیان نہیں کیا گیا ہے۔

پیکیج کے مشمولات

براہ کرم تصدیق کریں کہ ذیل میں درج تمام اجزاء آپ کے پیکیج میں موجود ہیں:

  • 4 x Aluminum profiles for the clamping فریم
  • 1 x Fiberglass mosquito net fabric
  • 4 x Corner connectors
  • 4 x Corner connection caps
  • 4 x Stainless steel suspension springs
  • 2 x Piping handles
  • 4 x Piping beads
  • 1 x Brush seal
  • 1 ایکس اسمبلی ہدایات
Diagram showing the components of the mosquito screen kit: aluminum profiles, corner connectors, mesh, handles, and piping.
Diagram showing the components of the mosquito screen kit: aluminum profiles, corner connectors, mesh, handles, and piping.

سیٹ اپ اور اسمبلی

Follow these steps to assemble and install your window mosquito screen:

  1. پرو تیار کریں۔files: ایلومینیم پرو کو جوڑیں۔files using the corner connectors to form the frame. Ensure they are securely fitted.
  2. Install the Mesh: Lay the fiberglass mosquito net fabric over the assembled frame. Using the piping beads and a suitable tool (not included, typically a spline roller), press the fabric into the groove of the aluminum profiles. Trim any excess fabric.
  3. Attach Handles and Springs: Secure the two piping handles to the frame. Insert the stainless steel suspension springs into the designated slots on the frame.
  4. Apply Brush Seal: Integrate the brush seal into the frame. This seal helps to close any gaps between the mosquito screen and your window frame, providing enhanced protection against insects.
  5. Installation on Window: The assembled mosquito screen is designed to be hung onto the window frame using the integrated suspension springs. No drilling into your window frame is required. The slim profile (9 mm total installation depth) allows for installation even behind existing roller shutters.
A woman demonstrating the easy installation of the Schellenberg Basic Window Mosquito Screen by holding it up to a window.
A woman demonstrating the easy installation of the Schellenberg Basic Window Mosquito Screen by holding it up to a window.
Close-up of the aluminum profile with brush seal and fiberglass mesh, showing dimensions 8mm and 23mm.
Close-up of the aluminum profile with brush seal and fiberglass mesh, showing dimensions 8mm and 23mm.

آپریٹنگ ہدایات

Once installed, the mosquito screen provides continuous insect protection. To open or close your window, simply unhook the screen from the window frame using the handles and set it aside. Re-attach it when the window is in the desired position. For seasonal use, the screen can be easily removed and stored.

دیکھ بھال

  • میش کی صفائی: The fiberglass mesh can be cleaned with a soft brush or a damp cloth and mild soapy water. Rinse thoroughly with clean water and allow to air dry. Avoid harsh chemicals or abrasive cleaners.
  • فریم کی صفائی: ایلومینیم فریم کو اشتہار سے صاف کریں۔amp کپڑا
  • ذخیرہ: For prolonged periods of non-use (e.g., winter), remove the screen from the window and store it in a dry, protected area to extend its lifespan.

خرابی کا سراغ لگانا

مسئلہ ممکنہ وجہ حل
Screen does not fit window opening. Incorrect measurements or assembly. Re-measure window opening and ensure profiles are cut to correct length during assembly. Check all corner connections.
Gaps between screen and window frame. Brush seal not properly installed or damaged. Ensure the brush seal is fully seated in its groove. Replace if damaged.
Mesh is loose or sagging. Piping bead not fully inserted or has come loose. Re-insert the piping bead firmly into the profile groove using a spline roller.

وضاحتیں

فیچر تفصیل
کارخانہ دار شیلنبرگ
ماڈل نمبر 70988
پروڈکٹ کے طول و عرض (L x W x H) 120 x 0.8 x 140 سینٹی میٹر
وزن 1.38 کلوگرام
سائز 120 x 140 سینٹی میٹر
رنگ سفید
پروfile موٹائی 23 x 8 ملی میٹر
مواد Aluminum, Fiberglass
استعمال آؤٹ ڈور
بیٹریاں درکار ہیں۔ نہیں
اصل ملک چین
Diagram illustrating the dimensions of the assembled mosquito screen: 120 cm width and 140 cm height.
Diagram illustrating the dimensions of the assembled mosquito screen: 120 cm width and 140 cm height.

وارنٹی اور سپورٹ

For warranty information, product support, or to inquire about replacement parts, please refer to the official Schellenberg webسائٹ یا ان کی کسٹمر سروس سے براہ راست رابطہ کریں۔ کسی بھی وارنٹی دعووں کے لیے اپنی خریداری کا ثبوت رکھیں۔

رابطہ کی معلومات:

  • مینوفیکچرر: شیلنبرگ
  • Webسائٹ: www.schellenberg.de (Please check for local country-specific webسائٹس)

© 2023 Schellenberg. All rights reserved. Information subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.