تعارف
This manual provides essential information for the safe and efficient operation of your Renogy 2000W 12V Pure Sine Wave Power Inverter. This device converts 12V DC battery power into 230V AC household power, suitable for a wide range of electronic devices and appliances. Please read this manual thoroughly before installation and use, and retain it for future reference.

Image: The Renogy 2000W Pure Sine Wave Power Inverter, a black rectangular unit with blue accents, shown in a typical outdoor setting.
حفاظتی ہدایات
- برقی حفاظت: Always ensure proper grounding. Do not expose the inverter to water, rain, or excessive moisture. Operate in a well-ventilated area.
- بیٹری کنکشن: Connect the inverter directly to a 12V deep cycle battery. Ensure correct polarity (positive to positive, negative to negative). Incorrect connections can damage the inverter and battery.
- لوڈ کرنے کی صلاحیت: Do not exceed the inverter's continuous power rating of 2000W or peak power rating of 4000W. Overloading can cause damage and pose a fire hazard.
- وینٹیلیشن: Ensure adequate airflow around the inverter to prevent overheating. Do not block ventilation openings.
- بچے اور پالتو جانور: انورٹر کو بچوں اور پالتو جانوروں کی پہنچ سے دور رکھیں۔
- دیکھ بھال: Disconnect all power before performing any maintenance or cleaning.
پیکیج کے مشمولات
تصدیق کریں کہ تمام اشیاء پیکیج میں موجود ہیں:
- Renogy 2000W 12V 220V Pure Sine Wave Inverter x 1
- 20 mm² Cable x 1
- Remote Control (cable length: approximately 3m) x 1

Image: A close-up of a high-quality copper cable, indicating the type of accessory included for optimal performance.
مصنوعات کی خصوصیات
- Powerful DC-AC Conversion: Provides 2000W continuous power (4000W peak) from 12V DC to 230V AC with 90% conversion efficiency.
- خالص سائن ویو ٹیکنالوجی: Delivers stable, clean power comparable to grid electricity, protecting sensitive electronics and extending their lifespan.
- جامع تحفظ کا نظام: Features LED indicators for under-voltagای ، زیادہ جلدtage, over-temperature, overload, and short-circuit protection. Includes a cooling fan and internal DC fuse for enhanced safety.
- Integrated Grid Priority Circuit: Ensures continuous 230V power by automatically switching between shore power and inverter power.
- درخواست کی وسیع رینج: Suitable for PCs, laptops, tablets, medical devices, and various household appliances.
- صارف دوست ڈیزائن: Equipped with 2 AC outlets and a remote control for convenient operation.
- پائیدار تعمیر: مضبوط دھات casing protects against impacts. High-speed fans maintain optimal operating temperature.

تصویر: سامنے view of the Renogy 2000W Inverter, highlighting the two AC outlets and the main power switch.

Image: The Renogy 2000W Inverter displaying icons for its six electronic protection features, including over-temperature, short circuit, and overload protection.

تصویر: پیچھے view of the inverter, showing the dual cooling fans designed for powerful heat dissipation and efficient system operation.
سیٹ اپ
تنصیب کا مقام
Install the inverter in a dry, cool, and well-ventilated area. Avoid direct sunlight, heat sources, and moisture. Ensure sufficient clearance around the unit for proper airflow.
وائرنگ ڈایاگرام
Follow the diagram below for correct connection of the inverter to your solar power system. Ensure all connections are secure and properly insulated.

Image: A detailed wiring diagram illustrating the connections between solar panels, charge controller, battery, inverter, and various DC/AC loads in a solar power system.
بیٹری سے منسلک ہو رہا ہے۔
- Ensure the inverter is switched OFF.
- Connect the supplied 20 mm² cable to the DC input terminals on the rear of the inverter. Ensure positive (+) is connected to positive and negative (-) to negative.
- Connect the other end of the cables to your 12V deep cycle battery. Use appropriate fuses or circuit breakers as recommended for your system.
- Tighten all connections securely to prevent loose contacts and arcing.
AC لوڈز کو جوڑنا
Plug your AC appliances directly into the 230V AC outlets on the front of the inverter. Ensure the total power consumption of your appliances does not exceed 2000W.
آپریٹنگ ہدایات
پاورنگ آن/آف
- Ensure all DC and AC connections are correctly made.
- Press the main power switch on the front of the inverter to the 'ON' position. The indicator lights will illuminate.
- To power off, switch the main power switch to the 'OFF' position.
ریموٹ کنٹرول کا استعمال
The included remote control allows you to power the inverter on or off from a distance, which is convenient when the inverter is installed in an inaccessible location.

Image: The remote control unit for the Renogy inverter, featuring an on/off switch and indicator lights, mounted on a wooden surface.
- Connect the remote control cable to the designated port on the inverter.
- Use the switch on the remote control to turn the inverter ON or OFF.
اشارے لائٹس
The inverter features LED indicators that provide status information and alert you to potential issues:
- گرین ایل ای ڈی: عام آپریشن کی نشاندہی کرتا ہے۔
- ریڈ یلئڈی: Indicates a fault or protection mode (e.g., overload, over-temperature, low voltage). Refer to the Troubleshooting section for details.
دیکھ بھال
- صفائی: وقتا فوقتا انورٹر کے بیرونی حصے کو خشک کپڑے سے صاف کریں۔ اس بات کو یقینی بنائیں کہ وینٹیلیشن کے سوراخ دھول اور ملبے سے پاک ہوں۔ مائع کلینر استعمال نہ کریں۔
- کنکشن چیک: Regularly inspect all DC and AC connections for tightness and corrosion. Tighten any loose connections.
- بیٹری کی صحت: Ensure your battery is well-maintained and charged to prolong its lifespan and the inverter's performance.
خرابی کا سراغ لگانا
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| انورٹر آن نہیں ہوتا ہے۔ | Loose battery connection; Low battery voltage اڑا ہوا فیوز | Check battery connections; Charge battery; Replace fuse (if applicable and safe to do so) |
| کوئی AC آؤٹ پٹ نہیں ہے۔ | اوورلوڈ زیادہ درجہ حرارت؛ کم/ہائی ان پٹ والیومtage | بوجھ کو کم کریں؛ انورٹر کو ٹھنڈا ہونے دیں۔ بیٹری والیوم چیک کریں۔tage |
| Red LED indicator is on | Overload; Over-temperature; Input voltage out of range; Short circuit | Identify and resolve the specific fault condition. Disconnect loads, check connections, allow cooling. |
| پنکھا نہیں چل رہا ہے۔ | Normal operation (fan activates under load/temperature); Fan malfunction | Ensure inverter is under load or operating at higher temperatures. If no fan operation under load, contact support. |
وضاحتیں
| تفصیلات | قدر |
|---|---|
| برانڈ | Renogy |
| ماڈل کا نام | R-INVT-PUH1-201235-DE/EU |
| طاقت (مسلسل) | 2000 واٹ |
| چوٹی آؤٹ پٹ پاور | 4000 واٹ |
| ان پٹ جلدtage | 12 وولٹ (DC) |
| آؤٹ پٹ والیمtage | 230 وولٹ (AC) |
| آؤٹ پٹ ویوفارم | خالص سائن لہر |
| تعدد | 50 Hz |
| کل پاور آؤٹ لیٹس | 2 |
| طول و عرض (L x W x H) | 48.2L x 22W x 9.2H سینٹی میٹر |
| شے کا وزن | 4.8 کلوگرام |
| تجویز کردہ استعمال | Powering sensitive electronics during camping or outdoor activities, medical devices, household appliances during travel or off-grid living. |
| سرٹیفیکیشنز | ETL, CE, UKCA, RoHS, ECE R10 |
وارنٹی اور سپورٹ
The Renogy 2000W 12V Pure Sine Wave Power Inverter comes with a 2 سال کی وارنٹی covering materials and manufacturing defects.
For technical support, warranty claims, or any product-related inquiries, please contact Renogy customer service directly. If you encounter any issues, especially transport-related damage, please reach out via buyer message for assistance with replacement or partial refund options.
Please visit the official Renogy webسب سے حالیہ رابطے کی معلومات کے لیے سائٹ یا اپنی خریداری کے دستاویزات کا حوالہ دیں۔