JONATHAN Y Apollo JYL6134A 3-Light LED Pendant Light Instruction Manual

تعارف

This manual provides essential instructions for the safe installation, operation, and maintenance of your JONATHAN Y Apollo JYL6134A 3-Light LED Pendant Light. Please read this manual thoroughly before beginning installation and retain it for future reference.

حفاظتی معلومات

انتباہ: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Improper installation can result in injury or death.

• تمام برقی کنکشن مقامی کوڈز اور آرڈیننس، نیشنل الیکٹرک کوڈ (NEC) اور ANSI/NFPA 70-1999 کے مطابق ہونے چاہئیں۔
• اگر آپ کو انسٹالیشن کے عمل کے بارے میں یقین نہیں ہے تو ایک مستند الیکٹریشن سے مشورہ کریں۔
• This fixture must be hardwired. Professional installation is recommended.
• اس فکسچر کو بے بنیاد برقی نظام سے مت جوڑیں۔
• تجویز کردہ واٹ سے تجاوز نہ کریں۔tagای بلب کے لیے۔
• بجلی بحال کرنے سے پہلے یقینی بنائیں کہ تمام کنکشن محفوظ ہیں۔

پیکیج کے مشمولات

تنصیب شروع کرنے سے پہلے تصدیق کریں کہ تمام اجزاء موجود ہیں:

• چڑھنے والی پلیٹ
• چھتری
• Pendant Shades (3)
• ایل ای ڈی بلب (3)
• بڑھتے ہوئے ہارڈ ویئر (پیچ، تار گری دار میوے)

شکل 1: ختمview of the JONATHAN Y Apollo 3-Light LED Pendant Light components and features.

سیٹ اپ اور انسٹالیشن

Professional installation by a qualified electrician is recommended for this hardwired fixture.

1. پاور آف کریں: Before starting, ensure the power to the circuit is turned off at the main electrical panel.
2. ماؤنٹنگ پلیٹ تیار کریں: Attach the mounting plate to the junction box in the ceiling using the provided screws.
3. لٹکن کی اونچائی کو ایڈجسٹ کریں: Each pendant's cord length is adjustable. Determine the desired hanging height for each light and secure the cord at the canopy.
4. وائر کنکشن: Connect the fixture's wires to the corresponding household wires (black to black, white to white, ground to ground) using the provided wire nuts. Ensure all connections are secure.
5. کینوپی منسلک کریں: Carefully push the canopy up to the ceiling, covering the junction box and wiring. Secure it with the provided screws.
6. بلب انسٹال کریں: Screw the included LED bulbs into each pendant socket.
7. بجلی کی بحالی: Once installation is complete and all connections are secure, restore power at the main electrical panel.

Figure 2: Key features for installation, including adjustable height and easy assembly.

آپریٹنگ ہدایات

• پاور آن/آف: Operate the light using a standard ON/OFF wall switch.
• Dimming تقریب: This fixture is dimmable. To utilize the dimming feature, ensure you have a compatible dimmer switch installed and dimmable LED bulbs.
• سایڈست اونچائی: The height of each pendant can be adjusted during installation to suit your preference and space requirements.

دیکھ بھال

• صفائی: To clean the fixture, turn off the power and wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• بلب کی تبدیلی: Ensure power is off before replacing bulbs. Use E26 base LED bulbs, not exceeding 40 watts per bulb.

خرابی کا سراغ لگانا

وضاحتیں

Figure 3: Detailed dimensions of the pendant light fixture.

وارنٹی اور سپورٹ

وارنٹی: This product comes with a 30-day manufacturer warranty for defects only. Normal wear and tear is not warranted. Visible damages not noted upon delivery will be determined to be customer damage and will not be warranted. All products are inspected upon arrival, and worn, dirty, or stained merchandise will not be accepted for warranty claims.

For warranty information or support, please contact the internet customer service center.