فلیکس ایل بی ای 17-11 125 اینگل گرائنڈر یوزر مینوئل

1. پروڈکٹ ختمview

The Flex LBE 17-11 125 is a powerful and high-quality angle grinder designed for cutting, deburring, and grinding tasks. It incorporates advanced features for enhanced performance, safety, and durability.

• Microprocessor Electronics: Features soft start, restart interlock after power failure, overload protection, and constant electronics (CDC) for consistent performance.
• Mechanical Brake: Ensures the tool stops quickly, within 3.5 seconds, for increased safety.
• Anti-Kickback Function: Automatically switches off the motor if the disc jams, preventing dangerous kickback.
• اعلی صلاحیت والی موٹر: Designed for high load capacity and efficiency, delivering strong power output.
• Optimized Durability: Efficient air ducting and optimized carbon geometry contribute to a long service life.
• Dust Sealing: Sophisticated dust sealing protects the motor and gearbox from abrasive dust.
• ایرگونومک ڈیزائن: Compact and ergonomic form for comfortable handling.
• ٹول فری گارڈ ایڈجسٹمنٹ: The protective guard can be adjusted without the need for additional tools.
• SoftVib Handle: Features an integrated patented clamping nut wrench and vibration damping for reduced fatigue.

2. حفاظتی ہدایات

Always observe general power tool safety warnings and specific instructions for angle grinders. Failure to follow these warnings and instructions may result in electric shock, fire, and/or serious injury.

جنرل سیفٹی

• ہمیشہ مناسب ذاتی حفاظتی سامان (PPE) پہنیں، بشمول حفاظتی شیشے، سماعت سے تحفظ، دستانے، اور دھول کا ماسک۔
• یقینی بنائیں کہ ورک پیس محفوظ طریقے سے cl ہے۔amped before operation.
• Keep hands clear of rotating parts and the cutting/grinding area.
• آلے کو دھماکہ خیز ماحول میں نہ چلائیں، جیسے آتش گیر مائعات، گیسوں یا دھول کی موجودگی میں۔
• پاور ٹول چلاتے ہوئے بچوں اور دیکھنے والوں کو دور رکھیں۔

الیکٹریکل سیفٹی

• بجلی کی فراہمی والیوم کو یقینی بنائیںtage matches the rating on the tool's nameplate.
• ڈوری کو گالی نہ دیں۔ بجلی کے آلے کو لے جانے، کھینچنے یا ان پلگ کرنے کے لیے کبھی بھی ڈوری کا استعمال نہ کریں۔ ڈوری کو گرمی، تیل، تیز کناروں، یا حرکت پذیر حصوں سے دور رکھیں۔
• اگر اشتہار میں پاور ٹول چلا رہے ہیں۔amp مقام ناگزیر ہے، بقایا کرنٹ ڈیوائس (RCD) سے محفوظ سپلائی استعمال کریں۔

Specific Angle Grinder Safety

• Always use the protective guard. Ensure it is correctly positioned and securely fastened.
• Use only discs that are rated for the maximum speed of the grinder and are suitable for the material being worked on.
• Never use cutting discs for side grinding.
• Be aware of the anti-kickback feature; if the disc jams, the motor will shut off. Release the switch and clear the obstruction before restarting.
• Allow the disc to come to a complete stop using the mechanical brake before setting the tool down.

3 اجزاء اور خصوصیات

کلیدی اجزاء:

1. مین باڈی: Houses the motor, electronics, and gearbox.
2. حفاظتی محافظ: Adjustable, tool-free guard for user protection.
3. SoftVib Handle: Ergonomic side handle with vibration damping and integrated wrench.
4. سپنڈل لاک بٹن: For easy disc changes.
5. سلائیڈ سوئچ: Lockable for continuous operation.
6. Speed Selection Dial: For variable speed control (see Figure 2).
7. ایئر وینٹ: For motor cooling and dust expulsion.

4. سیٹ اپ

Attaching the SoftVib Handle

The SoftVib handle can be screwed into either the left or right side of the gearbox housing, depending on user preference and application. Ensure it is tightened securely.

Mounting the Protective Guard

The protective guard is tool-free adjustable. Position it to provide maximum protection for your specific task. Ensure it clicks securely into place.

Installing the Grinding/Cutting Disc

1. Unplug the tool from the power supply.
2. سپنڈل لاک بٹن کو دبائیں اور تھامیں۔
3. Place the inner clamping flange تکلا پر.
4. Place the desired 125mm disc onto the inner flange, ensuring it sits flush.
5. cl پر سکروamping nut (M14) and tighten it firmly using the integrated wrench in the SoftVib handle.
6. اسپنڈل لاک بٹن کو جاری کریں۔

5. آپریٹنگ ہدایات

پاورنگ آن/آف

• To switch on, push the slide switch forward. For continuous operation, push it further forward until it locks into place.
• To switch off, release the slide switch. If locked, press the rear part of the switch to release it.

متغیر رفتار کنٹرول

The speed selection dial (Figure 2) allows you to adjust the no-load speed between 2800 and 11500 rpm. Select the appropriate speed for the material and application. Lower speeds are generally used for polishing or working with sensitive materials, while higher speeds are for cutting and grinding.

Using the Mechanical Brake

The integrated mechanical brake stops the disc within 3.5 seconds after the tool is switched off. This enhances safety by quickly stopping rotation.

Working with the Grinder

• Always hold the grinder firmly with both hands.
• Allow the tool to reach full operating speed before contacting the workpiece.
• Apply steady, even pressure. Do not force the tool, as this can lead to overheating or disc damage.
• For cutting, use a slight rocking motion to prevent the disc from binding.
• Be mindful of sparks and debris. Direct them away from yourself and others.

6 دیکھ بھال

Regular maintenance ensures the longevity and safe operation of your Flex angle grinder.

صفائی

• صفائی سے پہلے ہمیشہ ٹول کو ان پلگ کریں۔
• Regularly clean the ventilation slots to prevent dust buildup, which can lead to overheating. Use compressed air if available.
• اشتہار کے ساتھ ٹول کے بیرونی حصے کو صاف کریں۔amp کپڑا سخت کیمیکل یا کھرچنے والے کلینر کا استعمال نہ کریں۔

کاربن برش

The optimized carbon geometry contributes to long brush life. If the tool's performance significantly drops or sparks excessively, the carbon brushes may need inspection or replacement. This should ideally be done by a qualified service technician.

ذخیرہ

Store the angle grinder in a dry, secure place, out of reach of children and unauthorized users.

7 خرابیوں کا سراغ لگانا

8. وضاحتیں

9. وارنٹی اور سپورٹ

Specific warranty details for this product may vary by region and retailer. Please refer to the warranty card included with your purchase or contact your point of sale for precise information.

Regarding spare parts availability, information is currently unavailable. For technical support, service, or inquiries about replacement parts, please contact Flex customer service or an authorized Flex service center in your region. Contact details can typically be found on the official Flex webسائٹ یا آپ کی مصنوعات کی پیکیجنگ پر۔