1. تعارف
This instruction manual provides comprehensive guidance for the installation, operation, and maintenance of your Xigmatek Galaxy II Elite AY120 ARGB 3-fan pack. This product is designed to enhance your computer system's cooling performance and aesthetic appeal with addressable RGB lighting. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
2. حفاظتی معلومات
- Always disconnect power from your computer before installing or removing any components.
- Handle components with care to avoid damage from electrostatic discharge. Consider using an anti-static wrist strap.
- Ensure all cables are connected securely and correctly to prevent short circuits or malfunction.
- Do not attempt to modify the product. Unauthorized modifications may void your warranty and pose safety risks.
- مصنوعات کو مائعات اور انتہائی درجہ حرارت سے دور رکھیں۔
3. پیکیج کے مشمولات
تصدیق کریں کہ نیچے دی گئی تمام اشیاء آپ کے پیکج میں موجود ہیں:
- 3 x Xigmatek Galaxy II Elite AY120 ARGB Fans (120mm)
- 1 x ARGB Control Box
- 1 X IR ریموٹ کنٹرول
- بڑھتے ہوئے پیچ
Image 3.1: Contents of the Xigmatek Galaxy II Elite AY120 ARGB 3-fan pack, including three 120mm ARGB fans, the ARGB control box, and the IR remote control.
4. سیٹ اپ اور انسٹالیشن
Follow these steps to install your Xigmatek Galaxy II Elite AY120 ARGB fans:
- اپنا سسٹم تیار کریں: Power off your computer and disconnect it from the power outlet. Open your computer case.
- ماؤنٹ دی فین:
- Identify the desired mounting locations for the 120mm fans within your PC case (e.g., front, top, rear).
- Secure each fan to the case using the provided mounting screws. Ensure the fan's airflow direction is appropriate for your cooling setup (typically intake at the front/bottom, exhaust at the rear/top).
- Connect Fans to Control Box:
- Connect the 6-pin fan cables from each of the three AY120 ARGB fans to the corresponding ports on the ARGB Control Box.
- Ensure connections are firm.
- Connect Control Box to Power:
- Connect the SATA power connector from your power supply unit (PSU) to the ARGB Control Box. This provides power to the fans and RGB lighting.
- Connect Control Box to Motherboard (Optional ARGB Sync):
- If your motherboard has a 5V 3-pin Addressable RGB (ARGB) header, you can connect the ARGB sync cable from the control box to this header. This allows you to control the fan lighting via your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync).
- Note: Do not connect to a 12V 4-pin RGB header, as this will damage the fans.
- کیبل مینجمنٹ: مناسب ہوا کے بہاؤ اور صاف ستھری تعمیر کو یقینی بنانے کے لیے تمام کیبلز کو صاف ستھرا روٹ کریں۔
- آخری مراحل: Close your computer case, reconnect the power, and power on your system.
Image 4.1: A single Xigmatek Galaxy II Elite AY120 ARGB fan, showcasing its illuminated blades and frame.
5. آپریٹنگ ہدایات
Once installed, you can control the ARGB lighting of your fans using either the included IR remote control or your motherboard's software (if connected to a 5V ARGB header).
5.1. Using the IR Remote Control
The IR remote allows you to cycle through various lighting effects, adjust brightness, and change colors. Point the remote directly at the ARGB Control Box for optimal response.
- پاور بٹن: Turn ARGB lighting On/Off.
- موڈ بٹن: Cycle through different lighting modes and effects.
- سپیڈ بٹن: Adjust the speed of dynamic lighting effects.
- چمک بٹن: Increase or decrease the brightness of the lighting.
- رنگ کے بٹن: Select static colors or color cycling modes.
5.2. Motherboard ARGB Software Control
If you have connected the control box to your motherboard's 5V 3-pin ARGB header, you can use your motherboard's proprietary software to synchronize and customize the lighting effects. Refer to your motherboard's manual for specific instructions on using its ARGB software.
- Ensure the ARGB sync cable is properly connected.
- Install the latest version of your motherboard's RGB control software.
- Select the appropriate ARGB device within the software to control the fans.
6 دیکھ بھال
باقاعدگی سے دیکھ بھال آپ کے مداحوں کی بہترین کارکردگی اور لمبی عمر کو یقینی بنانے میں مدد کرتی ہے۔
- صفائی: Periodically clean the fan blades and frames to remove dust buildup. Use a soft brush or compressed air. Ensure the computer is powered off and unplugged before cleaning.
- معائنہ: Check fan cables for any signs of wear or damage. Ensure all connections remain secure.
- Do Not Lubricate: The fan bearings are sealed and do not require lubrication. Attempting to lubricate them may cause damage.
7 خرابیوں کا سراغ لگانا
If you encounter issues with your Xigmatek Galaxy II Elite AY120 ARGB fans, refer to the following common problems and solutions:
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| پرستار نہیں گھوم رہے ہیں۔ |
|
|
| ARGB lighting is not working. |
|
|
| Fans are making unusual noise. |
|
|
8. وضاحتیں
| فیچر | تفصیل |
|---|---|
| ماڈل نمبر | EN42098 |
| پنکھے کا سائز | 120 ملی میٹر |
| لائٹنگ کی قسم | Addressable RGB (ARGB) |
| والیومtage | 5 وولٹ |
| پاور کنیکٹر | 6-pin (fan), SATA (control box) |
| مدر بورڈ سنک | 5V 3-pin ARGB Header (compatible with ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync) |
| کنٹرول کا طریقہ | IR Remote Control, Motherboard Software (via ARGB sync) |
| شور کی سطح | 1 سونے |
| پیکیج کے طول و عرض | 20.1 x 13.5 x 10.1 سینٹی میٹر |
| پیکیج کا وزن | 630 گرام |
9. وارنٹی اور سپورٹ
Xigmatek products are manufactured to high-quality standards. For warranty information, technical support, or replacement parts, please refer to the official Xigmatek webسائٹ یا اپنے مقامی خوردہ فروش سے رابطہ کریں۔ وارنٹی کے دعووں کے لیے اپنی خریداری کا ثبوت رکھیں۔
مزید مدد کے لیے، براہ کرم ملاحظہ کریں: www.xigmatek.com