1. پروڈکٹ ختمview
The Total TWP47506 750W Automatic Jet Water Pump is designed for efficient clean water collection and distribution. It is suitable for drawing water from wells, boreholes, open tanks, and other water supply sources. Primary applications include watering vegetable gardens, personal plots, and ensuring water circulation in fountains and various water features. Its design prioritizes ease of maintenance and portability, featuring an external tank location. The pump incorporates a brushless induction motor for long-lasting, maintenance-free operation. The robust cast iron pump casing can be rotated 90 degrees for flexible installation. This pump is capable of integration into automated water supply systems.
تصویر 1: Total TWP47506 750W Automatic Jet Water Pump. This image shows the complete pump unit with its motor and casing.
2. حفاظتی ہدایات
Read all safety warnings and instructions carefully before operating this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
جنرل سیفٹی
- ہمیشہ مناسب ذاتی حفاظتی سامان (پی پی ای) جیسے حفاظتی شیشے اور دستانے پہنیں۔
- اس بات کو یقینی بنائیں کہ ٹپنگ کو روکنے کے لیے پمپ کو ایک مستحکم، سطح کی سطح پر رکھا گیا ہے۔
- بچوں اور غیر مجاز افراد کو آپریٹنگ ایریا سے دور رکھیں۔
- پمپ کو دھماکہ خیز ماحول میں نہ چلائیں، جیسے آتش گیر مائعات، گیسوں یا دھول کی موجودگی میں۔
- Never use the pump to transfer flammable, corrosive, or explosive liquids.
- Disconnect the power supply before performing any maintenance, cleaning, or when the pump is not in use.
الیکٹریکل سیفٹی
- بجلی کی فراہمی والیوم کو یقینی بنائیںtage matches the specifications on the pump's rating label (220-240V, 50Hz).
- Use a properly grounded outlet. Do not modify the plug.
- Do not expose the pump or electrical connections to rain or wet conditions.
- Avoid using extension cords unless absolutely necessary. If an extension cord is used, ensure it is rated for outdoor use and has the correct gauge for the pump's power requirements.
- Never carry the pump by its power cord.
- Regularly inspect the power cord for damage. If damaged, have it replaced by a qualified electrician.
3. پیکیج کے مشمولات
تصدیق کریں کہ نیچے دی گئی تمام اشیاء موجود ہیں اور پیک کھولنے پر ان کا کوئی نقصان نہیں ہوا ہے۔
- 1 x Total TWP47506 750W Automatic Jet Water Pump
- 1 ایکس پریشر سوئچ
- 1 x Stainless Steel Hose
- 1 ایکس پریشر گیج
- 1 x Three-way Brass Fitting
- صارف دستی (یہ دستاویز)
4. تکنیکی تفصیلات
| تفصیلات | قدر |
|---|---|
| ماڈل نمبر | TWP47506 |
| قسم | Self-priming Automatic Jet Pump |
| ریٹیڈ پاور | 750W (1.0 HP) |
| والیومtage | 220-240V |
| تعدد | 50Hz |
| میکس ہیڈ | 45 میٹر |
| زیادہ سے زیادہ بہاؤ | 60 لیٹر فی منٹ |
| زیادہ سے زیادہ سکشن | 9 میٹر |
| پائپ قطر | 1 x 1 انچ |
| موٹر کی قسم | Copper Wire Induction Motor (Brushless) |
| امپیلر مواد | سٹینلیس سٹیل |
| پمپ سیasinجی مواد | کاسٹ آئرن |
| کیبل کی لمبائی | 0.3 میٹر |
| Tank Capacity (Cylindrical) | 24 لیٹر |
| پروڈکٹ کے طول و عرض (L x W x H) | 30 x 19 x 22 سینٹی میٹر |
| شے کا وزن | 1.5 کلوگرام |
| رنگ | چاندی |
5. سیٹ اپ اور انسٹالیشن
5.1 جگہ کا تعین
- Position the pump on a firm, level, and dry surface.
- Ensure adequate ventilation around the pump to prevent overheating.
- Protect the pump from direct exposure to weather elements (rain, direct sunlight, frost).
- Keep the pump as close as possible to the water source to minimize suction lift and maximize efficiency.
5.2 کنیکٹنگ پائپس
The pump is equipped with standard inch fittings for both suction and discharge pipes.
- سکشن پائپ: Connect a rigid, airtight suction pipe (1 inch diameter) to the pump's inlet. Ensure all connections are sealed to prevent air leaks, which can affect priming and pump performance. A foot valve with a strainer should be installed at the end of the suction pipe submerged in the water source to prevent debris from entering the pump and to maintain prime.
- ڈسچارج پائپ: Connect a discharge pipe (1 inch diameter) to the pump's outlet. Use the provided three-way brass fitting, pressure switch, and pressure gauge as part of your water supply system. Ensure all connections are secure.
5.3 پمپ پرائمنگ
This is a self-priming pump, but initial priming is crucial for proper operation. Before first use or after the pump has run dry:
- Ensure the suction pipe is fully submerged in the water source.
- Locate the priming plug on the top of the pump casing.
- Unscrew the priming plug and slowly fill the pump casing with clean water until it overflows.
- Replace and securely tighten the priming plug.
- Open any valves on the discharge side to allow air to escape during startup.
5.4 الیکٹریکل کنکشن
- Connect the pump's power cord to a grounded electrical outlet (220-240V, 50Hz).
- Ensure the electrical circuit is protected by a Residual Current Device (RCD) for added safety.
6. آپریشن
6.1 پمپ شروع کرنا
- Ensure the pump has been properly primed (Section 5.3).
- Verify all pipe connections are secure and leak-free.
- Plug the pump into the power outlet. The pump will start automatically if connected to an automated system with a pressure switch.
- Observe the pressure gauge. The pressure should rise as the pump builds pressure.
- If the pump does not draw water within a few minutes, switch it off, re-prime, and check for air leaks in the suction line.
6.2 خودکار آپریشن
When integrated into a water supply system with the included pressure switch, the pump will automatically start when water pressure drops (e.g., when a tap is opened) and stop when the desired pressure is reached (e.g., when the tap is closed). The 24-liter cylindrical tank helps maintain consistent pressure and reduces pump cycling.
6.3 پمپ کو روکنا
For temporary shutdown, close all water outlets. The pump will stop automatically if operating in an automated system. For complete shutdown or extended periods of non-use, unplug the pump from the power supply.
7 دیکھ بھال
Regular maintenance ensures optimal performance and extends the lifespan of your pump. Always disconnect the power supply before performing any maintenance.
7.1 باقاعدہ چیکس
- نقصان کے کسی بھی نشان کے لیے بجلی کی ہڈی اور پلگ کا معائنہ کریں۔
- Check all pipe connections for leaks. Tighten if necessary.
- Ensure the foot valve strainer is clear of debris. Clean if clogged.
- آپریشن کے دوران غیر معمولی آوازیں سنیں، جو کسی مسئلے کی نشاندہی کر سکتی ہے۔
7.2 صفائی
اشتہار کے ساتھ پمپ کے بیرونی حصے کو صاف کریں۔amp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the motor's ventilation openings are free from dust and debris.
7.3 موسم سرما (سرد موسم کے لیے)
اگر پمپ کو منجمد درجہ حرارت کا سامنا کرنا پڑتا ہے، تو نقصان کو روکنے کے لیے اسے نکالنا ضروری ہے:
- بجلی کی فراہمی منقطع کریں۔
- پمپ سے سارا پانی نکالیں casing by unscrewing the drain plug (if present) or by tilting the pump.
- Disconnect the suction and discharge pipes and drain them completely.
- پمپ کو خشک، ٹھنڈ سے پاک جگہ پر اسٹور کریں۔
8 خرابیوں کا سراغ لگانا
کسٹمر سپورٹ سے رابطہ کرنے سے پہلے، عام مسائل اور حل کے لیے درج ذیل جدول کو دیکھیں۔
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| پمپ شروع نہیں ہوتا ہے۔ | بجلی کی فراہمی نہیں ہے۔ ناقص پاور کورڈ/پلگ Motor overload protection tripped |
بجلی کا کنکشن اور آؤٹ لیٹ چیک کریں۔ معائنہ کریں اور خراب ہونے پر تبدیل کریں۔ Allow motor to cool, then restart. Check for blockages. |
| پمپ چلتا ہے لیکن پانی نہیں پہنچایا جاتا | پمپ پرائمڈ نہیں سکشن لائن میں ہوا کا اخراج سکشن لفٹ بہت زیادہ ہے۔ Foot valve clogged or stuck Water source empty |
Re-prime the pump (Section 5.3) Check all suction connections for leaks and tighten Relocate pump closer to water source Clean or replace foot valve Ensure adequate water in source |
| کم بہاؤ یا دباؤ | Partial blockage in pipes/impeller سکشن لائن میں ہوا کا اخراج پہنے ہوئے امپیلر۔ Incorrect pressure switch setting |
Inspect and clear blockages Check and seal suction connections اہل سروس کے اہلکاروں سے رابطہ کریں۔ Adjust pressure switch according to manufacturer guidelines (if adjustable) |
| پمپ سائیکل کو کثرت سے آن اور آف کریں۔ | Leak in discharge system Pressure tank pre-charge incorrect ناقص پریشر سوئچ |
Check for leaks in pipes, fittings, or fixtures Check and adjust pressure tank air pre-charge Inspect and replace pressure switch if necessary |
9. وارنٹی اور سپورٹ
This Total TWP47506 750W Automatic Jet Water Pump comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty period and coverage details.
For technical assistance, spare parts, or warranty claims, please contact Total customer support through your retailer or visit the official Total website for contact information in your region. When contacting support, please have your model number (TWP47506) and purchase date available.