Fenge ED-S48102WE Electric Standing Desk User Manual

1. تعارف

Thank you for choosing the Fenge ED-S48102WE Electric Standing Desk. This manual provides comprehensive instructions for the assembly, operation, and maintenance of your new desk. Designed to enhance your workspace ergonomics and productivity, this desk features electric height adjustment, memory presets, and an anti-collision system. Please read this manual thoroughly before assembly and use to ensure safe and optimal performance.

Image 1.1: The Fenge ED-S48102WE Electric Standing Desk, showcasing اس کا چیکنا ڈیزائن اور مربوط کنٹرول پینل۔

Image 1.2: Illustrates the versatility of the Fenge standing desk, allowing users to switch between sitting and standing positions for improved well-being.

2. حفاظتی معلومات

• اس بات کو یقینی بنائیں کہ استعمال سے پہلے تمام اجزاء محفوظ طریقے سے بندھے ہوئے ہیں۔
• Do not overload the desk. The maximum weight capacity is 80 kg (176.3 lbs).
• آپریشن کے دوران بچوں اور پالتو جانوروں کو میز سے دور رکھیں۔
• Ensure there are no obstructions in the desk's path during height adjustment to prevent damage or injury. The anti-collision feature will stop movement if an obstruction is detected.
• صرف فراہم کردہ پاور اڈاپٹر استعمال کریں۔
• ڈیسک کے برقی اجزاء کو جدا یا تبدیل نہ کریں۔ سروس کے لیے کسٹمر سپورٹ سے رابطہ کریں۔

3. پیکیج کے مشمولات

Please verify that all parts are present and undamaged before beginning assembly. If any parts are missing or damaged, please contact Fenge customer support.

• Desk Top (1 piece, 110x60cm, 16mm thick)
• Desk Legs/Frame (2 pieces)
• Control Panel with Memory Function
• پاور اڈاپٹر اور کیبلز
• Reinforcement Pipe
• Height Adjustment Feet (Adjusters)
• اسمبلی ہارڈ ویئر (اسکرو، ایلن رنچ، وغیرہ)
• ہدایت نامہ

4. اسمبلی کی ہدایات

Follow these steps carefully to assemble your Fenge Electric Standing Desk. It is recommended to have two people for assembly.

1. ان پیک اجزاء: احتیاط سے پیکیجنگ سے تمام حصوں کو ہٹا دیں اور انہیں صاف، نرم سطح پر ڈالیں تاکہ خروںچ سے بچا جا سکے۔
2. ڈیسک ٹانگیں منسلک کریں: Secure the desk legs to the underside of the desk top using the provided screws. Ensure they are aligned correctly.
3. Install Reinforcement Pipe: Attach the reinforcement pipe between the two desk legs. This enhances stability.
   

   Image 4.1: The reinforcement pipe provides additional stability to the desk frame.

4. کنٹرول پینل منسلک کریں: Mount the control panel to the underside of the desk top in an easily accessible location.
5. پاور اور کنٹرول کیبلز کو جوڑیں: Connect the motor cables from the legs to the control box, and then connect the control panel cable to the control box. Finally, connect the power adapter to the control box and plug it into a power outlet.
   

   Image 4.2: Proper cable management under the desk ensures a tidy and safe setup.
6. Install Height Adjustment Feet: Screw the adjustable feet into the bottom of the desk legs. These can be adjusted to level the desk on uneven surfaces.
   

   Image 4.3: Adjustable feet allow for leveling the desk and ensuring stability.

7. Initial Power-On and Reset: After connecting all cables, plug in the desk. Perform an initial reset by pressing and holding the 'Down' button until the desk reaches its lowest position and then slightly rises. This calibrates the desk.

5. آپریٹنگ ہدایات

5.1. کنٹرول پینل ختمview

Image 5.1: The control panel features up/down arrows, memory presets (1-4), and a 'Set' button.

• اوپر (▲) / نیچے (▼) بٹن: Press and hold to adjust the desk height manually. Release to stop.
• میموری پرسیٹس (1, 2, 3, 4): Store and recall up to four preferred height settings.
• 'S' (سیٹ) بٹن: Used to save a desired height into a memory preset.

5.2. Adjusting Desk Height

• دستی ایڈجسٹمنٹ: Press and hold the Up (▲) or Down (▼) button until the desk reaches your desired height.
• Using Memory Presets: Press the corresponding memory button (1, 2, 3, or 4) to automatically move the desk to the saved height.

5.3 میموری پرسیٹس سیٹ کرنا

1. Adjust the desk to your desired height using the Up (▲) or Down (▼) buttons.
2. Press the 'S' (Set) button. The display will show 'S'.
3. Within 3 seconds, press one of the memory buttons (1, 2, 3, or 4). The current height will be saved to that preset.

5.4 اینٹی تصادم کا نظام

The Fenge ED-S48102WE desk is equipped with an anti-collision system. If the desk encounters an obstruction during height adjustment, it will automatically stop and reverse slightly (2-3 cm) to prevent damage. Ensure the area around the desk is clear before operation, but this feature provides an extra layer of safety.

6 دیکھ بھال

• صفائی: میز کی سطح اور فریم کو نرم سے صاف کریں، ڈیamp کپڑا کھرچنے والے کلینر یا سخت کیمیکل سے پرہیز کریں۔
• معائنہ: Periodically check all screws and connections to ensure they are tight.
• کیبل مینجمنٹ: Ensure cables are neatly organized and not pinched or tangled, especially during height adjustments.

7 خرابیوں کا سراغ لگانا

8. وضاحتیں

Image 8.1: Detailed dimensions and height adjustment range of the Fenge ED-S48102WE desk.

9. وارنٹی اور سپورٹ

This Fenge product comes with a 12 ماہ کی وارنٹی from the date of purchase. In case of initial defects or issues during the warranty period, please contact Fenge customer support for assistance with returns or exchanges.

For further inquiries or technical support, please refer to the contact information provided with your purchase or visit the official Fenge webسائٹ