ONE Light 10105TR/W Trimless GU10 50W Recessed Spotlight User Manual

1. تعارف

Thank you for choosing the ONE Light 10105TR/W Trimless GU10 50W Recessed Spotlight. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference. This product complies with EN60598-1 and other specific standards.

2. حفاظتی ہدایات

• تنصیب، دیکھ بھال، یا بلب تبدیل کرنے سے پہلے مین سرکٹ بریکر پر بجلی کی فراہمی کو ہمیشہ منقطع کریں۔
• Installation should be performed by a qualified electrician in accordance with all local electrical codes and regulations.
• اس کی مصنوعات کے لئے ڈیزائن کیا گیا ہے صرف اندرونی استعمال. Do not install in wet or damp مقامات
• Ensure the ceiling material can support the weight of the fixture.
• زیادہ سے زیادہ واٹ سے تجاوز نہ کریں۔tage of 50W for the GU10 bulb.
• Avoid touching the bulb directly with bare hands, as oils can reduce bulb life.
• آتش گیر مواد کو لائٹ فکسچر سے دور رکھیں۔

3. پیکیج کے مشمولات

تنصیب شروع کرنے سے پہلے تصدیق کریں کہ تمام اجزاء موجود ہیں:

• 1x Recessed Spotlight Housing (White Aluminum)
• بڑھتے ہوئے ہارڈ ویئر
• بجلی کی تار
• چپکنے والی پیڈ

Image 1: Components of the ONE Light Trimless Recessed Spotlight, showing the mounting bracket and the light housing.

4. سیٹ اپ اور انسٹالیشن

This trimless recessed spotlight requires careful installation to achieve a seamless finish. Professional installation is recommended.

4.1 Dimensions and Preparation

Before cutting, ensure the chosen location avoids joists, pipes, or electrical wires. Refer to the dimensional diagram for precise cutout requirements.

Image 2: Dimensional diagram of the ONE Light Trimless Recessed Spotlight, indicating a 60mm diameter and 40mm height.

4.2 تنصیب کے مراحل

1. پاور آف کریں: یقینی بنائیں کہ تنصیب کے علاقے میں بجلی کی مرکزی فراہمی سرکٹ بریکر پر بند ہے۔
2. Prepare Ceiling Opening: Using the provided dimensions (60mm diameter), cut a precise hole in the ceiling. For trimless installation, additional plastering work around the fixture may be required after mounting the housing.
3. وائر کنکشن: Connect the electrical cord from the spotlight housing to your main electrical wiring. Ensure all connections are secure and insulated according to local electrical codes.
4. ماؤنٹ ہاؤسنگ: Insert the spotlight housing into the ceiling opening. Use the provided mounting hardware to secure the housing firmly in place. For a trimless finish, the housing should be flush with the ceiling surface, ready for plastering.
5. GU10 بلب انسٹال کریں: Once the housing is securely installed and any finishing work is complete, insert a GU10 bulb (max 50W) into the lamp holder. Twist to lock it in place.
6. حتمی اسمبلی: Insert the inner light component into the outer housing.
7. بجلی کی بحالی: ایک بار جب انسٹالیشن مکمل ہو جائے اور تمام کنکشن محفوظ ہو جائیں، سرکٹ بریکر پر بجلی بحال کریں۔

5. آپریٹنگ ہدایات

The ONE Light 10105TR/W spotlight operates via a standard wall switch connected to its electrical circuit. This fixture is dimmable نہیں.

5.1 بلب کی تبدیلی

To replace the GU10 bulb:

1. پاور آف کریں: Always disconnect power at the circuit breaker before replacing the bulb.
2. ٹھنڈا ہونے دیں: Let the old bulb cool down completely before touching it.
3. Remove Bulb: Gently push the bulb upwards and twist it counter-clockwise to release it from the GU10 base.
4. نیا بلب داخل کریں: Align the pins of the new GU10 bulb with the slots in the lamp holder. Push upwards and twist clockwise to secure it. Ensure the new bulb is a GU10 type and does not exceed 50W.
5. بجلی کی بحالی: سرکٹ بریکر پر بجلی بحال کریں۔

6 دیکھ بھال

The ONE Light 10105TR/W spotlight requires minimal maintenance.

• صفائی: Ensure the power is off and the fixture is cool. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
• صارف کے قابل خدمت حصے نہیں: Other than bulb replacement, there are no user-serviceable parts inside the fixture. Do not attempt to disassemble the unit.

7 خرابیوں کا سراغ لگانا

If you encounter issues with your spotlight, refer to the following common problems and solutions:

• لائٹ آن نہیں ہوتی:
  • Check if the power supply to the fixture is on at the circuit breaker and wall switch.
  • یقینی بنائیں کہ GU10 بلب درست طریقے سے نصب ہے اور ناقص نہیں ہے۔ اسے کسی معروف کام کرنے والے بلب سے تبدیل کرنے کی کوشش کریں۔
  • Verify electrical connections are secure (consult a qualified electrician if unsure).
• ہلکی ہلکی پھلکی:
  • Ensure the GU10 bulb is fully seated and twisted into the base.
  • The bulb may be faulty or nearing the end of its life. Replace the bulb.
  • Check for loose wiring connections (consult a qualified electrician).

8. وضاحتیں

Image 3: EU Energy Label for the luminaire, indicating compatibility with bulbs of various energy classes from A++ to E.

9. وارنٹی اور سپورٹ

This product is covered by a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the point of purchase or contact your retailer. For technical support or inquiries, please reach out to your seller or the ONE Light customer service department.