Ikea 703.384.18

Ikea BAGGANAS 703.384.18 Stainless Steel Handle Instruction Manual

ماڈل: 703.384.18

1. پروڈکٹ ختمview

The Ikea BAGGANAS 703.384.18 is a set of two stainless steel handles designed for cabinets and drawers. These handles offer a modern and clean aesthetic, suitable for various interior styles. Each handle measures 143mm in length and features a durable stainless steel finish.

  • Set includes 2 BAGGANAS handles.
  • Dimensions: Length 143 mm, Width 9 mm, Depth 31 mm.
  • Required drilled hole diameter: 5 mm.
  • Hole spacing (center-to-center): 128 mm.
  • Finish: Stainless steel.

2. حفاظتی معلومات

Please read all instructions carefully before installation. Keep small parts and packaging materials away from children. Always use appropriate safety gear, such as eye protection, when drilling. Ensure the mounting surface is suitable for drilling and can support the handle securely.

3. پیکیج کے مشمولات

  • 2 x Ikea BAGGANAS Handles (Model: 703.384.18)
  • Mounting screws (typically included with Ikea handles)

4. سیٹ اپ اور انسٹالیشن

اوزار کی ضرورت ہے:

  • پنسل
  • پیمائش کرنے والا ٹیپ یا حکمران
  • 5 ملی میٹر ڈرل بٹ کے ساتھ ڈرل کریں۔
  • Screwdriver (appropriate for the provided screws)

تنصیب کے مراحل:

  1. پیمائش اور نشان: Determine the desired position for your handle on the cabinet door or drawer front. Using a measuring tape and pencil, mark two points 128 mm apart (center-to-center) where the screws will go. Ensure the marks are level and centered as desired.
  2. ڈرل پائلٹ سوراخ: Carefully drill pilot holes at the marked points using a 5 mm drill bit. Drill straight through the material to avoid splintering.
  3. ہینڈل منسلک کریں: Align the handle with the drilled holes. Insert the mounting screws from the inside of the cabinet door or drawer and thread them into the handle.
  4. پیچ کو سخت کریں: Using a screwdriver, tighten the screws until the handle is firmly secured. Do not overtighten, as this can damage the cabinet material or the handle.
Ikea BAGGANAS 703.384.18 stainless steel handle, showing its rectangular shape and finish.

This image displays the Ikea BAGGANAS handle, highlighting its sleek stainless steel finish and rectangular design. The handle measures 143mm in length and is ready for installation.

5. آپریٹنگ

Once installed, the BAGGANAS handle functions as a pull for opening and closing cabinet doors or drawers. Grip the handle firmly and apply gentle force to operate the furniture component.

6. دیکھ بھال اور دیکھ بھال

To maintain the appearance and longevity of your stainless steel handles, follow these care instructions:

  • صفائی: Wipe the handles regularly with a soft cloth dampپانی یا ہلکے، غیر کھرچنے والے صفائی کے محلول کے ساتھ ختم کریں۔
  • سخت کیمیکلز سے بچیں: Do not use abrasive cleaners, steel wool, or chemical solvents, as these can scratch or damage the stainless steel finish.
  • خشک کرنا: Dry the handles immediately after cleaning to prevent water spots.

7 خرابیوں کا سراغ لگانا

  • ڈھیلا ہینڈل: If the handle becomes loose, gently tighten the mounting screws from the inside of the cabinet or drawer using an appropriate screwdriver. Do not overtighten.
  • خروںچ: Minor surface scratches on stainless steel may sometimes be reduced using a specialized stainless steel polish and a soft cloth, following the product's instructions. Deep scratches may require professional attention or replacement.

8. وضاحتیں

وصفقدر
ماڈل نمبر703.384.18
برانڈIkea
موادسٹینلیس سٹیل
رنگچاندی
مجموعی لمبائی143 ملی میٹر
چوڑائی9 ملی میٹر
Depth (Projection)31 ملی میٹر
Hole Spacing (Center-to-Center)128 ملی میٹر
Required Drilled Hole Diameter5 ملی میٹر
اشیاء کی تعداد2
مطلوبہ استعمالانڈور

9. وارنٹی اور سپورٹ

For information regarding warranty coverage or product support, please refer to your purchase receipt or contact the retailer where the product was purchased. You may also visit the official Ikea website for general customer service and support information.

© 2023 Ikea. جملہ حقوق محفوظ ہیں۔ یہ ہدایت نامہ صرف معلوماتی مقاصد کے لیے ہے۔

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.