OOYCYOO 100 Amp MPPT Solar Charge Controller 12V/24V User Manual

1. تعارف

Thank you for choosing the OOYCYOO 100 Amp MPPT Solar Charge Controller. This device is designed to efficiently manage power flow from your solar panels to your battery bank, ensuring optimal charging and system protection. It is compatible with 12V and 24V battery systems and supports various battery types including AGM, Sealed, Gel, Flooded, and Lithium batteries.

2. حفاظتی ہدایات

• تنصیب اور آپریشن سے پہلے تمام ہدایات کو احتیاط سے پڑھیں۔
• Ensure all wiring is correctly polarized (positive to positive, negative to negative) to prevent damage.
• Always connect the battery to the charge controller first, before connecting solar panels. Disconnect solar panels first, then the battery.
• Use appropriate wire gauges for all connections to handle the rated current.
• زیادہ گرم ہونے سے بچنے کے لیے کنٹرولر کو ہوادار جگہ پر لگائیں۔
• Avoid short circuits and reverse polarity connections.
• خود کنٹرولر کو الگ کرنے یا مرمت کرنے کی کوشش نہ کریں۔ خدمت کے لیے اہل افراد سے رابطہ کریں۔

3. مصنوعات کی خصوصیات

• MPPT (Maximum Power Point Tracking) technology for efficient solar energy harvesting (≥99% tracking rate, >98% conversion rate).
• خودکار 12V/24V سسٹم والیومtagای شناخت.
• Compatibility with multiple battery types: USER (customizable for Lithium, LiFePO4, Li(NiCoMn)O2), Flooded, Sealed, and Gel batteries.
• User-programmable settings for absorption voltagای، فلوٹنگ والیومtagای، اور کم والیومtage منقطع
• Comprehensive protection features: PV over current/power, PV short circuit, PV reverse polarity, night reverse charging, battery reverse polarity, battery over voltage, battery over discharge, battery overheating, controller overheating, lithium battery low temperature, load short circuit, load overload, TVS high voltagای عارضی
• Built-in cooling fan with intelligent temperature control (ON >45℃, OFF <40℃) and porous heat dissipation for extended lifespan.
• Blacklight LCD Display showing charge amount (KWH) and other parameters.
• Max PV input power: 1300W (12V system), 2600W (24V system).
• میکس پی وی اوپن سرکٹ والیومtage: 100VDC۔

4. پیکیج کے مشمولات

• 1 x OOYCYOO 100A MPPT Solar Charge Controller
• 1 ایکس درجہ حرارت سینسر
• 1 ایکس یوزر مینوئل (انگریزی)

5. وضاحتیں

6. سیٹ اپ اور انسٹالیشن

6.1. Unboxing and Overview

Upon unboxing, inspect the charge controller for any visible damage. Familiarize yourself with the device's layout and connection points.

6.2 چڑھنا

Mount the charge controller vertically on a non-flammable surface in a dry, well-ventilated area, away from direct sunlight and heat sources. Ensure sufficient clearance around the unit for proper airflow, especially around the cooling fans.

6.3. وائرنگ کنکشن

Follow the wiring sequence carefully to avoid damage to the controller or batteries. The controller accepts up to 6 AWG wire for main power connections. Ensure all connections are tight and secure.

1. بیٹری کنکشن: Connect the battery cables to the BATTERY terminals on the controller first. Ensure correct polarity (positive to positive, negative to negative).
2. سولر پینل کنکشن: Connect the solar panel cables to the SOLAR PANEL terminals. Ensure correct polarity.
3. لوڈ کنکشن (اختیاری): If using the DC load output, connect your DC loads to the DC LOAD terminals. Ensure correct polarity.
4. درجہ حرارت سینسر: Plug the included temperature sensor into the designated port. Attach the sensor to the battery for accurate temperature compensation during charging.

For a visual guide on setting up a solar system with a charge controller and inverter, refer to the video below:

6.4. ابتدائی ترتیب

After all connections are made, the controller will power on. You may need to configure the battery type and system voltage if it's not automatically detected or if you are using a custom battery type like Lithium.

The controller features a blacklight LCD display for easy monitoring and configuration. Use the buttons to navigate through the menu and adjust settings as needed. For detailed instructions on setting battery parameters, refer to the specific section in the printed user manual.

7. آپریٹنگ ہدایات

The LCD display provides real-time information about your solar system. Use the navigation buttons (Menu, Up, Down, Enter) to view different parameters and access settings.

7.1 LCD ڈسپلے ختمview

The display shows various parameters such as:

• PV والیومtagای اور کرنٹ
• بیٹری والیومtagای اور چارج کرنٹ
• لوڈ والیوم۔tagای اور کرنٹ
• بیٹری کی صلاحیت فیصدtage
• محیطی درجہ حرارت
• Cumulative Power Generation (KWH)
• Error/Fault Indicators

7.2. Setting Battery Parameters

To optimize charging for your specific battery type, you can adjust parameters like absorption voltagای، فلوٹ والیومtagای، اور کم والیومtage disconnect. Consult the detailed instructions in the full user manual for precise steps on how to enter the settings menu and modify these values.

7.3. لوڈ کنٹرول

The controller features a programmable load timer. You can set the load to turn on/off at specific times or based on battery voltage levels. This feature helps conserve battery power and manage your DC loads efficiently.

8 دیکھ بھال

• سختی اور سنکنرن کے لئے تمام وائرنگ کنکشن کو باقاعدگی سے چیک کریں۔
• Keep the controller's cooling vents clear of dust and debris to ensure proper heat dissipation.
• Periodically inspect the battery terminals for corrosion and clean if necessary.
• کسی بھی ایرر کوڈز یا غیر معمولی ریڈنگ کے لیے LCD ڈسپلے کی نگرانی کریں۔

9 خرابیوں کا سراغ لگانا

If you encounter issues with your OOYCYOO MPPT Solar Charge Controller, refer to the following general troubleshooting tips:

• کوئی ڈسپلے/کوئی پاور نہیں: بیٹری کے کنکشن چیک کریں اور بیٹری والیوم کو یقینی بنائیںtage کم از کم آپریٹنگ والیوم سے اوپر ہے۔tage.
• کوئی چارجنگ نہیں: Verify solar panel connections and ensure sufficient sunlight. Check for any PV over current/short circuit protection activation.
• Battery Over-Discharge: Adjust the low voltage disconnect setting if necessary. Ensure your loads are not exceeding the battery's capacity.
• ایرر کوڈز: Consult the full user manual for a list of specific error codes and their corresponding solutions.

For issues related to battery activation or if your battery is not working as expected, the following video provides helpful steps:

10. وارنٹی اور سپورٹ

For warranty information, technical support, or service inquiries, please refer to the contact details provided in your product packaging or visit the OOYCYOO official webسائٹ خریداری کے ثبوت کے طور پر اپنی خریداری کی رسید اپنے پاس رکھیں۔