1. تعارف
This manual provides essential information for the safe and effective installation, operation, and maintenance of the JIAYIN JYPC-4 Series Electromagnetic Plunger Pump. This pump is designed for applications requiring precise water suction and delivery, commonly found in hot water dispensers and similar systems. Please read this manual thoroughly before using the product and retain it for future reference.
2. پروڈکٹ ختمview
The JIAYIN JYPC-4 is a compact and efficient electromagnetic plunger pump. Key features include:
- شرح شدہ جلدtage: AC 100V - 120V, 60Hz, 22W
- بہاؤ کی شرح: 750 ±15% cc/min
- ورکنگ پریشر: ≥1.5 bar
- ورکنگ میڈیم: Water or non-corrosive liquids
- مواد: پائیدار پلاسٹک کی تعمیر
- ڈرائیو موڈ: برقی مقناطیسی
شکل 1: زاویہ دار view of the JIAYIN JYPC-4 Series electromagnetic plunger pump, showing its compact design and main components.
تصویر 2: کلوز اپ view of the JIAYIN JYPC-4 pump, highlighting the electrical terminals and the product specification label.
Figure 3: Technical drawing providing detailed dimensions of the JIAYIN JYPC-4 pump in millimeters.
3. تکنیکی تفصیلات
| پیرامیٹر | قدر |
|---|---|
| برانڈ | JIAYIN |
| ماڈل | JYPC-4 |
| شرح شدہ جلدtage | AC 100V - 120V, 60Hz |
| بجلی کی کھپت | 22W |
| بہاؤ کی شرح | 750 ±15% cc/min |
| ورکنگ پریشر | ≥1.5 bar |
| پمپ کی قسم | Plunger پمپ |
| Pump Shaft Position | افقی |
| Impeller Structure | Closed Impeller |
| Number of Impellers | سنگل ایسtage |
| خالص وزن | 137 ±5g (approx. 4.8 oz) |
| مواد | پلاسٹک |
| موصلیت کی کلاس | H |
| ڈرائیو موڈ | برقی مقناطیسی |
| کنکشن کا طریقہ | کینول |
| محیطی درجہ حرارت | Ta 70℃ (158°F) |
| سیال کا درجہ حرارت | Tf 60℃ (140°F) |
| یو پی سی | 607469294553 |
4. حفاظتی ہدایات
چوٹ یا نقصان کو روکنے کے لیے، ہمیشہ درج ذیل حفاظتی احتیاطی تدابیر پر عمل کریں:
- برقی حفاظت: Ensure the pump is connected to a power source matching the specified voltage (AC 100V-120V, 60Hz). Disconnect power before any installation, maintenance, or troubleshooting.
- سیال مطابقت: Use only with water or non-corrosive liquids. Using corrosive fluids can damage the pump and void the warranty.
- درجہ حرارت کی حد: Do not exceed the maximum ambient temperature of 70℃ (158°F) or fluid temperature of 60℃ (140°F).
- مناسب تنصیب: Install the pump securely in a horizontal position as specified. Ensure all connections are tight to prevent leaks.
- خشک دوڑ سے بچیں: Do not operate the pump without fluid, as this can cause severe damage.
- وینٹیلیشن: Ensure adequate ventilation around the pump to prevent overheating.
- بچے اور پالتو جانور: پمپ اور اس کے اجزاء کو بچوں اور پالتو جانوروں کی پہنچ سے دور رکھیں۔
5. سیٹ اپ اور انسٹالیشن
مناسب تنصیب کے لیے ان اقدامات پر عمل کریں:
- چڑھنا: Securely mount the pump in a horizontal position using appropriate fasteners. Refer to Figure 3 for dimensions and mounting points.
- سیال کنکشن: Connect the inlet and outlet tubes to the pump's cannula ports. Ensure a tight fit to prevent leaks. For flow testing, a 13.8-inch silicon tube with an outer diameter of 0.31 inches and an inner diameter of 0.16 inches is recommended for the water inlet port.
- الیکٹریکل کنکشن: Connect the pump to a compatible AC 100V-120V, 60Hz power supply. Ensure wiring is done by a qualified professional if you are unsure.
- پرائمنگ (اگر ضروری ہو): Depending on your system, you may need to prime the pump by ensuring the fluid path is filled with liquid before initial operation to prevent dry running.
6. آپریشن
Once installed and connected, operate the pump as follows:
- پاور آن: Apply power to the pump. The electromagnetic mechanism will activate, initiating the plunger action.
- مانیٹر فلو: Observe the fluid flow to ensure it is within the specified range of 750 ±15% cc/min and that the working pressure is maintained at or above 1.5 bar.
- مسلسل آپریشن: The pump is designed for continuous operation (ED100%).
- بجلی بند: Disconnect power when the pump is not in use or when maintenance is required.
7 دیکھ بھال
Regular maintenance ensures optimal performance and extends the pump's lifespan:
- صفائی: Periodically inspect the pump for any external dirt or debris. Clean with a soft, damp کپڑا سخت کیمیکل استعمال نہ کریں۔
- رابطے: Regularly check all fluid and electrical connections for tightness and signs of wear or corrosion.
- سیال کا معیار: Ensure the working fluid remains clean and free of particles that could clog the pump. If the fluid contains impurities, consider adding a filter to the system.
- ذخیرہ: If storing the pump for an extended period, ensure it is clean, dry, and stored in a cool, dry place away from direct sunlight and extreme temperatures.
8 خرابیوں کا سراغ لگانا
عام مسائل اور ان کے ممکنہ حل کے لیے درج ذیل جدول کو دیکھیں:
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| پمپ شروع نہیں ہوتا ہے۔ | بجلی کی فراہمی نہیں ہے۔ غلط جلدtage ڈھیلا بجلی کا کنکشن | طاقت کا منبع چیک کریں۔ جلد کی تصدیق کریںtage matches pump rating محفوظ بجلی کے کنکشن |
| Low or no fluid flow | Inlet/outlet clogged Air in the system (not primed) Leak in fluid connections خشک چل رہا ہے | Inspect and clear blockages وزیر اعظم پمپ کنکشن چیک کریں اور سخت کریں۔ Ensure fluid supply is constant |
| آپریشن کے دوران غیر معمولی شور | نظام میں ہوا ڈھیلا لگانا اندرونی رکاوٹ | سسٹم سے ہوا کا اخراج بڑھتے ہوئے پیچ کو سخت کریں۔ Inspect for foreign objects (disconnect power first) |
| Leakage from connections | ڈھیلے روابط Damaged tubing/cannula | Tighten all fluid connections Replace damaged tubing or cannula |
9. وارنٹی اور سپورٹ
For warranty information or technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase. Any unauthorized disassembly or modification of the pump will void the warranty.