1. تعارف
This manual provides instructions for the installation, operation, and maintenance of your INJORA Brass Skid Plate (Model: SCX24-111BK). This accessory is designed to enhance the performance of 1/24 scale RC Crawler vehicles, specifically Axial SCX24 models including Gladiator, Bronco, C10, JLU, and Deadbolt. The brass construction adds crucial weight to the chassis, improving the vehicle's center of gravity, rear traction, and overall stability during crawling.
2. اجزاء شامل ہیں
تنصیب شروع کرنے سے پہلے تصدیق کریں کہ تمام اجزاء موجود ہیں۔
- 1x INJORA Brass Skid Plate
- Mounting Screws (quantity as shown in image)
تصویر 2.1: The INJORA Brass Skid Plate and its accompanying mounting screws. The skid plate weighs 15g (0.53oz).
تصویر 2.2: اوپر view of the INJORA Brass Skid Plate, showcasing the etched INJORA logo and mounting points.
تصویر 2.3: نیچے view of the INJORA Brass Skid Plate, showing the recessed areas for transmission protection.
تصویر 2.4: A comparison image showing a standard plastic skid plate (right) next to the INJORA Brass Skid Plate (left), highlighting the material difference for weight and durability.
3. انسٹالیشن گائیڈ
The INJORA Brass Skid Plate is designed for straightforward installation. Follow these steps carefully:
- اپنی گاڑی تیار کریں: Ensure your 1/24 RC Crawler (Axial SCX24 series) is powered off and the battery is disconnected. Place the vehicle on a stable, clean surface.
- Remove Existing Skid Plate: Locate the screws securing the stock skid plate to the chassis. Carefully remove these screws using an appropriate small screwdriver. Keep the screws in a safe place if you intend to retain the original part.
- Detach Transmission (if necessary): Depending on your specific SCX24 model, you may need to temporarily detach the transmission from the chassis to access the skid plate mounting points. Refer to your RC vehicle's original manual for detailed disassembly instructions if needed.
- Position the Brass Skid Plate: Align the INJORA Brass Skid Plate with the mounting holes on your RC crawler's chassis. Ensure the plate is oriented correctly to protect the transmission.
- Secure the Skid Plate: Use the provided mounting screws to attach the brass skid plate to the chassis. Tighten the screws evenly until snug. زیادہ تنگ نہ کریں۔, as this can strip threads or damage components.
- Reassemble (if necessary): If you detached the transmission, reattach it securely. Double-check all connections and ensure no wires are pinched.
- فائنل چیک: Gently test the movement of the suspension and ensure all components are properly seated and secured.
ویڈیو 3.1: This video demonstrates the installation process of a similar INJORA upgrade part on an RC crawler, providing a visual guide for component handling and attachment. The video shows the vehicle's chassis and the careful placement of new parts.
4. Operation and Performance Benefits
Once installed, the INJORA Brass Skid Plate immediately contributes to improved RC crawler performance. The added weight of 15g, strategically placed at the lowest point of the chassis, lowers the vehicle's center of gravity. This results in:
- بہتر استحکام: Reduces the likelihood of rollovers on steep inclines and uneven terrain.
- بہتر کرشن: The increased weight over the rear axle helps tires maintain better grip, especially during climbs.
- Transmission Protection: The durable brass construction provides superior protection for the transmission and other sensitive undercarriage components against impacts and abrasions during crawling.
Operate your RC crawler as usual, observing the enhanced stability and traction provided by this upgrade.
5 دیکھ بھال
To ensure the longevity and optimal performance of your INJORA Brass Skid Plate, follow these simple maintenance guidelines:
- باقاعدگی سے صفائی: After each use, especially in dirty or wet conditions, clean the skid plate to remove dirt, mud, and debris. A soft brush and mild soap with water can be used. Ensure the plate is thoroughly dried to prevent corrosion, although the black hard coating offers protection.
- نقصان کا معائنہ کریں: Periodically check the skid plate for any signs of wear, bending, or damage. While brass is durable, extreme impacts can cause deformation.
- سکرو کی سختی چیک کریں: Vibrations during operation can sometimes loosen screws. Regularly inspect and gently tighten all mounting screws to ensure the skid plate remains securely attached.
6 خرابیوں کا سراغ لگانا
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| Skid plate feels loose after installation. | پیچ کافی سخت نہیں ہوئے یا وقت کے ساتھ ساتھ ڈھیلے ہوئے ہیں۔ | Gently re-tighten all mounting screws. Avoid overtightening. |
| بڑھتے ہوئے سوراخوں کو سیدھ میں لانے میں دشواری۔ | Incorrect orientation of the skid plate or minor manufacturing tolerances. | Ensure the skid plate is oriented correctly. Apply slight pressure to align holes if necessary, but do not force. If persistent, contact support. |
| Reduced performance or unusual noises after installation. | Transmission not reassembled correctly or wires pinched. | Review the installation steps, especially transmission reattachment. Ensure no components are interfering with moving parts. |
7. وضاحتیں
- برانڈ: انجورا
- ماڈل نمبر: SCX24-111BK
- مواد: پیتل
- رنگ: Black (with chamfered edges)
- وزن: تقریباً 15 گرام (0.53 اونس)
- مطابقت: 1/24 RC Crawler Axial SCX24 series (Gladiator, Bronco, C10, JLU, Deadbolt, AXI90081)
- طول و عرض: 3.15 x 1.18 x 1.97 انچ (تقریبا، پروڈکٹ ڈیٹا کی بنیاد پر)
8. وارنٹی اور سپورٹ
INJORA products are manufactured to high standards. For any questions, concerns, or support regarding your Brass Skid Plate, please contact INJORA customer service through their official channels or the retailer from whom the product was purchased. Please retain your proof of purchase for warranty claims.
مزید معلومات کے لیے، ملاحظہ کریں۔ INJORA Store on Amazon.