VONROC Hydrophore Water Pump Set 1000W, 19L Stainless Steel (Model GP500)

1. تعارف

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your VONROC Hydrophore Water Pump Set, Model GP500. This powerful 1000W pump with a 19L stainless steel tank is designed for various water supply applications, including garden irrigation, domestic water supply, and drawing water from wells or ponds. Please read these instructions carefully before using the product and keep them for future reference.

2. حفاظتی ہدایات

Always observe the following safety precautions to prevent electric shock, injury, or damage to the pump.

• دستی پڑھیں: آپریشن سے پہلے، اس دستی میں دی گئی تمام ہدایات کو اچھی طرح پڑھیں اور سمجھیں۔
• برقی حفاظت: Ensure the power supply matches the pump's specifications (230V). Always connect the pump to a properly grounded outlet. Do not operate the pump with damaged cables or plugs.
• پانی کا درجہ حرارت: Do not pump liquids hotter than 35°C (95°F).
• ٹھنڈ سے تحفظ: Protect the pump from frost. Drain all water from the pump and hoses during winter or when temperatures drop below freezing.
• جگہ کا تعین: Install the pump on a stable, level surface, protected from direct weather exposure.
• نگرانی: آپریشن کے دوران پمپ کو بغیر توجہ کے مت چھوڑیں۔
• دیکھ بھال: کوئی بھی دیکھ بھال یا صفائی کرنے سے پہلے بجلی کی فراہمی منقطع کر دیں۔
• بچے اور پالتو جانور: بچوں اور پالتو جانوروں کو آپریٹنگ پمپ سے دور رکھیں۔

3. پروڈکٹ ختمview

3.1 اجزاء

The VONROC Hydrophore Water Pump Set consists of the following main components:

• پمپ یونٹ: The electric motor and pump housing, providing 1000W of power.
• پریشر ٹینک: A 19-liter stainless steel tank that maintains water pressure and reduces pump cycling.
• پریشر سوئچ: Automatically starts and stops the pump based on water pressure.
• پریشر گیج: Displays the current system pressure.
• سکشن کنکشن: G1 female threaded inlet for connecting the suction hose.
• پریشر کنکشن: G1 female threaded outlet for connecting the discharge hose.
• ڈرین پلگ: For easy draining of water from the pump.

شکل 1: ختمview of the VONROC Hydrophore Water Pump Set.

3.2 تکنیکی تفصیلات

Figure 2: Product dimensions of the pump set.

4. سیٹ اپ

4.1 جگہ کا تعین

• Place the pump on a firm, level, and stable surface to prevent vibrations and ensure proper operation.
• Ensure the pump is protected from rain, direct sunlight, and extreme temperatures.
• Maintain adequate ventilation around the pump motor.

4.2 کنیکٹنگ ہوزز

• سکشن لائن: Connect a robust, vacuum-resistant suction hose (minimum 1 inch diameter) to the pump's suction inlet (G1 female thread). Ensure all connections are airtight to prevent air ingress, which can impair pump performance. It is highly recommended to install a non-return valve at the end of the suction hose to prevent water from flowing back.
• Pressure Line: Connect the discharge hose (G1 female thread) to the pump's pressure outlet. This hose will lead to your irrigation system, tap, or other water consumption points.

Figure 3: Suction and pressure connections.

4.3 پمپ پرائمنگ

Before initial use or after the pump has run dry, it is crucial to prime the pump:

1. Ensure the suction hose is fully submerged in the water source.
2. Open the priming port (usually a screw on top of the pump housing) and slowly fill the pump housing with water until it overflows.
3. Close the priming port securely.
4. Open any taps or valves in the pressure line to allow air to escape during startup.

5. آپریٹنگ ہدایات

5.1 پمپ شروع کرنا

1. After priming, plug the pump into a suitable electrical outlet.
2. Switch on the pump. The pump will start to draw water and build pressure.
3. Once the pressure reaches the set cut-off point (visible on the pressure gauge), the pump will automatically switch off.
4. When water is drawn (e.g., by opening a tap), the pressure will drop, and the pressure switch will automatically restart the pump.

Figure 4: Pump in operation, delivering water.

5.2 مانیٹرنگ پریشر

The integrated pressure gauge allows you to monitor the system pressure. The pump is designed to operate within a specific pressure range, automatically switching on and off to maintain consistent water supply.

Figure 5: Pressure gauge displaying system pressure.

5.3 بند کرنا

To turn off the pump, simply switch it off at the power switch and disconnect it from the electrical outlet.

6 دیکھ بھال

Regular maintenance ensures the longevity and optimal performance of your pump. Always disconnect the pump from the power supply before any maintenance.

• کنکشن چیک کریں: Periodically inspect all hose connections for leaks and ensure they are tight.
• فلٹر صاف کریں: If a pre-filter is installed on the suction line, clean it regularly to prevent blockages.
• پمپ ہاؤسنگ: Keep the pump housing clean and free from dirt and debris.
• سرمائی کاری: Before the first frost, completely drain all water from the pump and hoses using the drain plug. Store the pump in a dry, frost-free location. Failure to do so will void the warranty.

7 خرابیوں کا سراغ لگانا

عام مسائل اور ان کے حل کے لیے نیچے دیے گئے جدول کو دیکھیں۔

The pump is equipped with thermal protection to prevent overheating. If the pump stops unexpectedly, allow it to cool down before attempting to restart.

8. ذخیرہ

When storing the pump for extended periods, especially during winter:

• Completely drain all water from the pump, tank, and connected hoses.
• Clean the exterior of the pump.
• Store the pump in a dry, frost-free, and well-ventilated area, away from direct sunlight and corrosive substances.

9. وارنٹی اور سپورٹ

VONROC products are designed and manufactured to high-quality standards. This product comes with a manufacturer's warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official VONROC webسائٹ

For technical support, spare parts, or service inquiries, please contact VONROC customer service through their official channels. Always have your model number (GP500) and purchase date available when contacting support.