تعارف
Thank you for choosing the Jambo 16-inch Liquid Motion Lamp. This manual provides essential information for the safe and proper use, setup, operation, and maintenance of your lamp. Please read it thoroughly before use and retain it for future reference.
The Jambo Liquid Motion Lamp creates a mesmerizing visual display as heated wax slowly rises and falls within a liquid-filled glass vessel. This dynamic effect provides a calming and decorative ambiance for any indoor space.
حفاظتی معلومات
محفوظ آپریشن کو یقینی بنانے اور نقصان کو روکنے کے لیے، براہ کرم درج ذیل حفاظتی تدابیر پر عمل کریں:
- صرف اندرونی استعمال: یہ ایلamp is designed for indoor use in dry locations. Do not use it outdoors or in wet environments.
- برقی حفاظت: ایل کو یقینی بنائیںamp is connected to a 120-volt power outlet. Do not overload electrical outlets.
- حرارت کی وارننگ: Lamp and its contents become hot during operation. Do not touch the glass or base while the lamp is on or immediately after turning it off. Allow sufficient time for cooling.
- مستحکم جگہ کا تعین: ایل رکھیںamp on a flat, stable, and heat-resistant surface away from edges where it could be easily knocked over.
- Avoid Shaking: Do not shake, drop, or move the lamp while it is operating or hot, as this can damage the internal components and cause the liquid to become cloudy.
- بچوں اور پالتو جانوروں سے دور رہیں: Due to the heat generated, keep the lamp بچوں اور پالتو جانوروں کی پہنچ سے دور۔
- وینٹیلیشن: Ensure adequate air circulation around the lamp to prevent overheating. Do not cover the lamp.
- خراب شدہ ہڈی: اگر پاور کی ہڈی کو نقصان پہنچا ہے، تو خطرات سے بچنے کے لیے اسے مینوفیکچرر یا کسی مستند سروس ایجنٹ سے تبدیل کرنا چاہیے۔
پیکیج کے مشمولات
تصدیق کریں کہ پیک کھولنے پر تمام اجزاء موجود ہیں:
- 1 x Jambo Liquid Motion Lamp Unit (Base, Glass Vessel, Cap)
- 1 x 30-Watt Incandescent Bulb (E17 base)
سیٹ اپ
Follow these steps to set up your Jambo Liquid Motion Lamp:
- پیک کھولیں: پیکیجنگ سے تمام اجزاء کو احتیاط سے ہٹا دیں۔
- بلب کی تنصیب: If the bulb is not pre-installed, gently screw the included 30-watt E17 incandescent bulb into the socket located in the lamp base. Do not overtighten.
- Place Glass Vessel: Carefully place the glass vessel onto the lamp بیس، اس بات کو یقینی بنانا کہ یہ محفوظ طریقے سے بیٹھتا ہے.
- Attach Cap: Place the decorative cap onto the top of the glass vessel.
- پوزیشن ایلamp: جمع ایل رکھیںamp on a flat, stable, and heat-resistant surface, away from direct sunlight, extreme temperatures, or drafts.
- پاور سے رابطہ کریں: پاور کورڈ کو معیاری 120 وولٹ کے برقی آؤٹ لیٹ میں لگائیں۔
آپریٹنگ ہدایات
Operating your Jambo Liquid Motion Lamp سیدھا ہے:
- آن کریں: Locate the rotary switch on the power cord or base (depending on model) and turn it to the 'ON' position. The bulb will illuminate.
- وارم اپ ٹائم: For the first use, or after extended periods of inactivity, the lamp may take 2-4 hours to fully warm up and for the wax to begin flowing smoothly. This is normal.
- Wax Movement: Once warmed, the wax will begin to soften, rise, and fall in captivating patterns. The lamp operates best at room temperature (20-25°C / 68-77°F).
- آپریٹنگ دورانیہ: For optimal performance and longevity, it is recommended to operate the lamp for no more than 8-10 hours at a time. Allow it to cool down completely before restarting.
- آف کریں: ایل کو بند کرنے کے لیےamp, rotate the switch to the 'OFF' position and unplug it from the power outlet when not in use for extended periods.
دیکھ بھال
Proper care will ensure the longevity and performance of your lamp:
- صفائی: ایل کو یقینی بنائیںamp is unplugged and completely cool before cleaning. Wipe the exterior of the glass and base with a soft, damp cloth. Do not use abrasive cleaners or immerse any part of the lamp پانی میں
- بلب کی تبدیلی: If the bulb burns out, unplug the lamp and allow it to cool. Carefully remove the old bulb and replace it with a new 30-watt, E17 base incandescent bulb. Ensure the replacement bulb matches the original specifications.
- ذخیرہ: اگر ایل کو ذخیرہ کر رہے ہیں۔amp for an extended period, ensure it is clean, dry, and stored upright in a cool, dark place.
- نہ کھولیں: Never attempt to open the sealed glass vessel or tamper with its contents. This will void any warranty and can be dangerous.
خرابی کا سراغ لگانا
If you encounter issues with your Jambo Liquid Motion Lampمندرجہ ذیل عام مسائل اور حل کی طرف رجوع کریں:
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| Lamp آن نہیں ہوتا | No power, faulty bulb, or loose connection. | چیک کریں کہ آیا ایلamp is properly plugged in. Ensure the power outlet is functional. Verify the rotary switch is in the 'ON' position. Replace the bulb if it is burnt out. |
| Wax is not moving or moving slowly. | Insufficient warm-up time, cold room temperature, or incorrect bulb wattage. | Allow 2-4 hours for the lamp to fully warm up. Ensure the room temperature is between 20-25°C (68-77°F). Confirm the bulb is a 30-watt E17 incandescent type. |
| Liquid is cloudy. | Initial cloudiness, lamp shaken, or improper storage. | Initial cloudiness often clears after several hours of continuous operation. Avoid shaking or dropping the lamp. If cloudiness persists after multiple uses, contact customer support. |
| Wax is stuck at the top or bottom. | Not fully warmed up, lamp tilted, or excessive heat/cold. | ایل کو یقینی بنائیںamp has had sufficient warm-up time. Verify the lamp is placed on a level surface. Avoid placing the lamp near heat sources or in very cold areas. |
وضاحتیں
Key technical specifications for the Jambo 16-inch Liquid Motion Lamp (Model KL-217):
| فیچر | تفصیل |
|---|---|
| ماڈل نمبر | KL-217 |
| ابعاد (D x W x H) | 11.4 سینٹی میٹر x 11.4 سینٹی میٹر x 39.4 سینٹی میٹر (تقریباً 4.5 x 4.5 x 15.5 انچ) |
| سایہ کی اونچائی | 16 انچ |
| طاقت کا منبع | کورڈڈ الیکٹرک |
| والیومtage | 120 وولٹ |
| واٹtage | 30 واٹ |
| بلب کی قسم | تاپدیپت |
| بلب بیس | E17 |
| سوئچ کی قسم | روٹری |
| بنیادی مواد | ایلومینیم |
| سایہ دار مواد | شیشہ |
| ختم کی قسم | دھاتی |
| انڈور / آؤٹ ڈور استعمال | انڈور |
| پانی کی مزاحمت کی سطح | واٹر پروف نہیں۔ |
| یو پی سی | 850019692297 |
وارنٹی اور سپورٹ
Jambo is committed to providing high-quality products. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.
For technical support, troubleshooting assistance beyond what is covered in this manual, or inquiries regarding parts and service, please contact Jambo customer support through the retailer where you purchased the product or visit the official Jambo webرابطے کی معلومات کے لیے سائٹ۔