تعارف
This manual provides detailed instructions for the installation, operation, and maintenance of your Jansite H11 Wireless Solar Tire Pressure Monitoring System (TPMS). This system is designed to enhance driving safety by providing real-time tire pressure and temperature data, alerting you to potential issues.
The Jansite H11 TPMS features a 3.5-inch color display, supports 2-wheel and 4-wheel modes, offers precise pressure readings to 0.01 bar, and includes multiple alarm functions. It is equipped with external sensors and supports dual solar/Type-C charging.
پروڈکٹ ختمview
The Jansite H11 TPMS is an advanced system designed for accurate and reliable tire monitoring. Key features include:
- 2-Wheel/4-Wheel Switchable Mode: Compatible with both 2-wheel (e.g., trailers) and 4-wheel vehicles (e.g., cars, SUVs).
- اعلی صحت سے متعلق سینسر: Provides tire pressure readings accurate to 0.01 bar (or 0.01 psi), ensuring precise data.
- Large 3.5-inch Color Display: Offers clear visibility of tire data with automatic brightness adjustment for various lighting conditions.
- دوہری چارجنگ کے اختیارات: Integrated solar panel for continuous charging and a Type-C port for wired charging, ensuring uninterrupted operation.
- Intelligent On/Off: Features vibration detection to automatically turn on when the vehicle starts and enter sleep mode after 5 minutes of inactivity.
- 6 الارم موڈز: Alerts for fast air leak, high pressure, low pressure, high temperature, sensor failure, and low battery.
- Durable External Sensors: Designed for reliability and ease of installation.
شکل 1: ختمview of Jansite H11 TPMS features, including 2/4-wheel mode, 3.5-inch display, Type-C charging, and durable sensors.
سیٹ اپ اور انسٹالیشن
Follow these steps to set up your Jansite H11 TPMS:
- مانیٹر چارج کریں: Before first use, fully charge the monitor using the provided Type-C USB cable. The monitor also charges via its solar panel when exposed to sunlight.
Figure 2: The TPMS monitor supports both solar and Type-C USB charging for continuous power.
- مانیٹر ماؤنٹ کریں: Choose one of the two mounting options:
- Windshield Mounted: Attach the monitor to the windshield using the adhesive bracket. Ensure it does not obstruct your view.
- Center Console Mounted: Place the monitor on the center console using the adhesive base. The unique separate design allows for angle adjustment.
Note: The monitor can be detached from its support by sliding it upwards. Consider this when choosing a mounting location to allow for easy removal if needed.
Figure 3: The monitor offers flexible mounting options for windshield or center console placement.
- Install External Sensors:
- Unscrew the original valve caps from your tires.
- Screw on the corresponding external sensors (marked FL, FR, RL, RR for Front Left, Front Right, Rear Left, Rear Right). Ensure they are tightened securely to prevent air leaks.
- The sensors are pre-paired at the factory. If re-pairing is needed, refer to the "Operating" section.
- Select 2-Wheel or 4-Wheel Mode: The system supports switching between 2-wheel and 4-wheel modes. This setting is crucial for accurate monitoring, especially for trailers or specific vehicle configurations. Refer to the "Operating" section for instructions on how to switch modes.
Figure 4: The system supports flexible 2-wheel or 4-wheel mode switching for various vehicle types.
آپریٹنگ ہدایات
Once installed, the Jansite H11 TPMS operates largely automatically.
Automatic On/Off and Sleep Mode
- خودکار ایکٹیویشن: The monitor will automatically turn on and begin displaying tire data when it detects vehicle vibration (e.g., when you start driving).
- خودکار نیند موڈ: If no vibration is detected for 5 minutes (e.g., after parking), the monitor will automatically enter sleep mode to conserve power.
Figure 5: The TPMS features intelligent on/off functionality based on vibration detection and automatic sleep mode.
معلومات ڈسپلے کریں۔
The 3.5-inch display shows real-time tire pressure and temperature for each tire. It also indicates battery status and alarm signs.
شکل 6: تفصیلی view of the TPMS display, highlighting pressure, temperature, units, and alarm indicators.
الارم کے افعال
The system provides 6 types of alarms to ensure driving safety:
- Fast Air Leak Alarm: Alerts rapidly to sudden pressure drops.
- ہائی پریشر الارم: Warns if tire pressure exceeds the set high limit.
- کم پریشر کا الارم: Warns if tire pressure falls below the set low limit.
- اعلی درجہ حرارت کا الارم: Alerts if tire temperature exceeds the safe limit.
- سینسر کی ناکامی کا الارم: Indicates a malfunction or loss of signal from a sensor.
- کم بیٹری الارم: Notifies when the monitor's internal battery is low.
Setting Alarm Values and Units
You can customize the high and low pressure alarm thresholds for front and rear wheels separately, and switch between pressure units (PSI/Bar) and temperature units (°F/°C).
- رسائی کی ترتیبات: Typically, a long press on a specific button (refer to the device's physical buttons, usually 'M' or 'Set') will enter the settings menu.
- نیویگیٹ کے اختیارات: Use the navigation buttons (e.g., left/right arrows or '+' / '-') to cycle through settings like pressure units, temperature units, and alarm thresholds.
- اقدار کو ایڈجسٹ کریں: Use the adjustment buttons to increase or decrease the desired values.
- ترتیبات کو محفوظ کریں: Confirm your selections, usually by pressing the 'M' or 'Set' button again.
شکل 7: سابقample of setting high and low pressure alarm values for front and rear tires.
دیکھ بھال
- مانیٹر چارجنگ: Ensure the monitor receives sufficient sunlight for solar charging. If operating in low light conditions or at night, use the Type-C USB cable to charge the device.
- سینسر بیٹری: The external sensors have internal batteries. If a sensor low battery alarm occurs, the sensor may need replacement. Consult customer support for sensor replacement.
- صفائی: Clean the monitor screen and sensors with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Sensor Security: Periodically check that the external sensors are securely tightened on the tire valves to prevent air leakage.
خرابی کا سراغ لگانا
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| مانیٹر آن نہیں ہوتا ہے۔ | Low battery; no vibration detected. | Charge the monitor via Type-C USB. Start the vehicle and drive to activate vibration detection. |
| No tire data displayed / Sensor failure alarm. | Sensor not installed correctly; sensor battery low; sensor out of range (for 2-wheel mode with trailer). | Re-install sensor securely. Check sensor battery (if replaceable, or consider replacement). Ensure monitor is within effective range of sensors (especially for trailers, max 5.8m). |
| غلط پریشر ریڈنگ۔ | Sensor not calibrated; incorrect unit setting. | Ensure sensors are correctly installed. Verify pressure unit (PSI/Bar) setting on the monitor. Compare with a reliable tire gauge. |
| الارم کثرت سے بجتا ہے۔ | Alarm thresholds set too narrow; actual tire pressure/temperature is outside normal range. | Adjust high/low pressure and temperature alarm thresholds to appropriate values for your vehicle. Check actual tire pressure and inflate/deflate as needed. |
| Vibration detection not working (monitor stays off). | System malfunction or sensitivity issue. | Ensure the monitor is fully charged. Try restarting the device if possible (refer to specific button combinations in the full manual if available). If issue persists, contact customer support. |
وضاحتیں
- ماڈل: H11 (JM-TYH11-EU2)
- برانڈ: جانسائٹ
- ڈسپلے سائز: 3.5 انچ
- دباؤ کی درستگی: ±0.01 bar (or ±0.01 psi)
- دباؤ کی حد: 21-87 psi (approximately 1.5 - 6.0 bar)
- چارج کرنا: Solar / USB Type-C
- آپریٹنگ موڈز: 2-wheel / 4-wheel switchable
- سینسر کی قسم: بیرونی
- آئٹم کا وزن: 220 گرام
- Product Dimensions (Monitor): 0.8 x 5 x 12 سینٹی میٹر (L x W x H)
وارنٹی اور سپورٹ
For warranty information, technical support, or replacement parts, please contact Jansite customer service through your original point of purchase or visit the official Jansite website. Please have your product model (H11) and purchase details ready when contacting support.
Note: The effective working distance for sensors, especially in 2-wheel mode with a trailer, is approximately 5.8 meters (19.7 ft). Exceeding this distance may lead to signal loss.