KEMIMOTO Motorcycle License Plate Bracket with LED Signal Light for Sportster S RH1250 User Manual

تعارف

This manual provides detailed instructions for the installation, operation, and maintenance of your KEMIMOTO Motorcycle License Plate Bracket with integrated LED Signal Light. This fender eliminator kit is designed for specific Sportster S RH1250 models (2021-2025) to replace the factory license plate holder and enhance the motorcycle's rear aesthetics and visibility. Please read this manual thoroughly before installation and use to ensure proper function and safety.

حفاظتی معلومات

• Always ensure the motorcycle is stable and turned off before beginning any installation or maintenance.
• Disconnect the battery before performing any electrical work to prevent short circuits or electrical shock.
• تنصیب کے دوران مناسب ذاتی حفاظتی سامان، جیسے دستانے اور آنکھوں کی حفاظت، پہنیں۔
• Ensure all connections are secure and wires are routed away from moving parts or hot surfaces.
• If you are unsure about any step, consult a qualified motorcycle technician.
• Verify all lights function correctly after installation before riding.

پیکیج کے مشمولات

تصدیق کریں کہ ذیل میں درج تمام اجزاء آپ کے پیکیج میں موجود ہیں:

Image: All parts included in the KEMIMOTO Fender Eliminator Kit.

1. Tail Light x1
2. Rack Holder x1
3. License Plate Bracket x1
4. ایکسٹینشن پلیٹ x1
5. M5 Square Head Bolt x2
6. بولٹ x2
7. M5*L12 Cross Head Bolt x2
8. M5 Flange Nut x4
9. زپ ٹائی x5
10. L Wrench x1

سیٹ اپ اور انسٹالیشن

This section outlines the steps to install the KEMIMOTO License Plate Bracket. Professional installation is recommended if you are not familiar with motorcycle electrical systems or component removal.

ختمview of Installed Product

Image: The KEMIMOTO Fender Eliminator Kit mounted on a motorcycle, showing integrated LED turn signals and brake light.

Image: Visual comparison of the motorcycle's rear fender before and after installation, demonstrating a cleaner appearance.

تنصیب کے مراحل

1. موٹر سائیکل تیار کریں: Park the motorcycle on a stable surface. Turn off the engine and remove the key. Disconnect the negative terminal of the battery to prevent accidental electrical issues.
2. Remove Original Components: Carefully remove the existing license plate holder and any associated wiring. Refer to your motorcycle's service manual for specific instructions on removing the rear fender and tail light assembly.
3. Assemble the Bracket: Attach the tail light to the rack holder, then secure the license plate bracket and extension plate using the provided M5 bolts and nuts. Ensure all connections are snug but do not overtighten.
4. Mount the New Assembly: Position the assembled KEMIMOTO bracket onto the motorcycle's rear fender area. Secure it using the appropriate bolts.
5. Wire the LED Lights: Connect the wiring of the new LED tail light and turn signals to the motorcycle's existing wiring harness. Match the wires according to their functions (e.g., brake, turn signal, ground). Use the provided zip ties to secure any loose wiring.
6. ٹیسٹ کی فعالیت: Reconnect the motorcycle battery. Turn on the ignition and test the brake light, left turn signal, and right turn signal to ensure they are all functioning correctly.
7. فائنل چیک: Ensure all bolts are tightened, and the bracket is securely mounted. Check for any obstructions or loose components.

انسٹالیشن ویڈیو گائیڈ

آپریٹنگ ہدایات

The KEMIMOTO License Plate Bracket features integrated LED lights that serve multiple functions for enhanced visibility and safety.

• Running Light: When the motorcycle's ignition is on, the LED lights will illuminate as a running light, providing continuous rear visibility.
• بریک لائٹ: When the brake lever or pedal is engaged, the LED lights will illuminate brighter to indicate braking.
• ٹرن سگنلز: Activating the left or right turn signal switch will cause the corresponding section of the LED light to flash, indicating your intended turn direction.

دیکھ بھال

Regular maintenance ensures the longevity and proper function of your license plate bracket and LED lights.

• صفائی: Clean the bracket and LED lens regularly with a soft cloth and mild soap solution. Avoid abrasive cleaners that could scratch the surface or damage the LED housing.
• معائنہ: Periodically check all mounting bolts for tightness. Vibrations from riding can cause fasteners to loosen over time.
• وائرنگ: Inspect wiring for any signs of wear, fraying, or damage. Ensure all electrical connections remain secure and free from corrosion.
• ایل ای ڈی کی فعالیت: Regularly test the running light, brake light, and turn signals to confirm they are all working correctly.

خرابی کا سراغ لگانا

If you encounter issues with your KEMIMOTO License Plate Bracket, refer to the following troubleshooting guide:

وضاحتیں

Image: Key dimensions of the KEMIMOTO license plate bracket.

وارنٹی اور سپورٹ

KEMIMOTO products are manufactured to high-quality standards. For warranty information, technical support, or assistance with parts, please refer to the contact information provided with your purchase or visit the official KEMIMOTO webسائٹ کسی بھی وارنٹی دعووں کے لیے خریداری کے ثبوت کے طور پر اپنی خریداری کی رسید رکھیں۔