Wasserstein Anti-Theft Mount for Google Nest Doorbell (Battery)

تعارف

This manual provides detailed instructions for the installation, operation, and maintenance of your Wasserstein Anti-Theft Mount for the Google Nest Doorbell (Battery). This mount is designed to secure your doorbell without requiring drilling, offering enhanced protection against theft and tampeering

مطابقت

This Anti-Theft Mount is specifically designed for and compatible with the Google Nest Doorbell (بیٹری). It is not compatible with other doorbell models such as Blink Video Doorbell, Arlo Essential Video Doorbell, or Ring Video Doorbell.

Image: Compatibility chart for the Wasserstein Anti-Theft Mount.

کلیدی خصوصیات

• چوری کے خلاف تحفظ: Designed to prevent your Google Nest Doorbell (Battery) from being stolen or tampکے ساتھ ered.
• بغیر ڈرل کی تنصیب: Installs easily in minutes without the need for drilling or permanent modifications to your door.
• Multiple Mounting Choices: Can be mounted in two directions to accommodate different door configurations.
• پائیدار تعمیر: Made of high-grade materials to secure your doorbell reliably.
• موسم مزاحم: Built to withstand outdoor elements.

سیٹ اپ اور انسٹالیشن

Door Requirements:

• Door thickness must be between 0.9 to 2.3 inches.
• There must be a minimum 1/8 inch gap between the door and the doorframe.
• Not suitable for inward-swinging or flush-fit doors.

Image: Door compatibility dimensions for the mount.

تنصیب کے مراحل:

1. Ensure your door meets the thickness and gap requirements.
2. اپنا دروازہ کھولو۔
3. Place the Wasserstein Anti-Theft Mount onto the edge of your door, ensuring the doorbell enclosure faces outwards.
4. Adjust the mounting direction if necessary. The mount is reversible to suit either side of your door.


Image: Reversible mounting options for the doorbell mount.

5. Tighten the adjustable screw on the inside of the door until the mount is firmly secured. Do not overtighten.


Image: Adjustable screw for no-drill installation.

6. Insert your Google Nest Doorbell (Battery) into the mount's enclosure. Ensure the doorbell's metal plate is properly attached to the back of the doorbell before inserting it into the mount.

Image: Securing the doorbell within the mount.
7. Secure the doorbell within the mount using the provided screws.

Image: Wasserstein Anti-Theft Mount with Google Nest Doorbell (Battery) installed.

آپریٹنگ ہدایات

Once installed, the mount provides a secure housing for your Google Nest Doorbell (Battery). The doorbell operates as normal within the mount.

Charging the Doorbell:

Since the Google Nest Doorbell (Battery) requires periodic recharging, you will need to remove it from the mount for this process. To do so:

1. Unscrew the securing screws that hold the doorbell within the mount.
2. Carefully remove the doorbell from the enclosure.
3. Charge your Google Nest Doorbell (Battery) according to its manufacturer's instructions.
4. After charging, re-insert the doorbell into the mount, ensuring the metal plate is correctly positioned, and secure it with the screws.

دیکھ بھال

The Wasserstein Anti-Theft Mount is constructed from durable, weather-resistant materials designed for long-lasting outdoor use. Regular maintenance is minimal:

• Periodically check the tightness of the adjustable screw to ensure the mount remains securely fastened to the door.
• ماؤنٹ کو نرم سے صاف کریں، ڈیamp cloth as needed to remove dust or debris. Avoid abrasive cleaners.
• Inspect the mount for any signs of wear or damage, especially after severe weather conditions.

خرابی کا سراغ لگانا

• Issue: Doorbell not functioning or showing 'Device Off - Device Not Mounted' after reinstallation.
  حل: Ensure the metal plate that comes with the Google Nest Doorbell is properly attached to the back of the doorbell before placing it into the Wasserstein mount. This plate is crucial for the doorbell's functionality and connection.
• Issue: Screws for securing the doorbell within the mount are stripping or difficult to use.
  حل: The provided screws are standard. If you experience stripping, consider replacing them with M3 x 10mm machine screws, preferably with hex socket heads, for improved durability and ease of use with an Allen wrench.
• Issue: Door does not close properly with the mount installed.
  حل: Verify that your door meets the specified thickness (0.9 to 2.3 inches) and gap (1/8 inch minimum) requirements. The mount may not be suitable for doors outside these specifications or for inward-swinging/flush-fit doors.

وضاحتیں

وارنٹی اور سپورٹ

For warranty information or technical support, please refer to the official Wasserstein webسائٹ یا ان کی کسٹمر سروس سے براہ راست رابطہ کریں۔ وارنٹی کے دعووں کے لیے اپنی خریداری کی رسید اپنے پاس رکھیں۔