DEWALT DWHT35625S

DEWALT ToughSeries 25ft Illuminated Tape Measure (DWHT35625S)

صارف دستی

تعارف

The DEWALT ToughSeries 25ft Illuminated Tape Measure (Model DWHT35625S) is engineered for durability and enhanced visibility in demanding work environments. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your tape measure.

DEWALT ToughSeries 25ft Illuminated Tape Measure front view

شکل 1: سامنے view of the DEWALT ToughSeries 25ft Illuminated Tape Measure.

سیٹ اپ

ابتدائی چارجنگ

Before first use, fully charge the integrated LED battery. The tape measure includes a USB charging cable for convenience.

  • Locate the USB charging port on the side of the tape measure.
  • Connect the provided USB cable to the tape measure and a compatible USB power source (e.g., wall adapter, computer USB port).
  • چارجنگ انڈیکیٹر لائٹ چارجنگ کے دوران روشن ہوگی۔
  • Allow approximately 3 hours for a full charge. A full charge provides up to 3 hours of continuous LED runtime.
DEWALT ToughSeries tape measure with USB cable

Figure 2: The DEWALT ToughSeries tape measure showing the included USB charging cable.

DEWALT ToughSeries tape measure being charged via USB

Figure 3: The tape measure connected to a power source for charging.

آپریٹنگ ہدایات

بلیڈ کو بڑھانا اور پیچھے ہٹانا

  • To extend the blade, pull the end hook away from the case.
  • To retract the blade, release the end hook and allow the blade to smoothly return into the case. Guide the blade to prevent rapid retraction.

Using the Slide Lock

  • To lock the blade at a desired measurement, push the slide lock button forward.
  • To release the lock, pull the slide lock button backward.

Activating the LED Light

The integrated LED light illuminates the measurement area for improved visibility in low-light conditions.

  • Press the LED power button (typically located near the blade opening) to turn the light on.
  • لائٹ آف کرنے کے لیے دوبارہ بٹن دبائیں۔
  • The LED features an automatic shut-off function after 60 seconds of inactivity to conserve battery life.
DEWALT ToughSeries tape measure with LED light active during measurement

Figure 4: The LED light illuminates the measurement area for clear readings.

پڑھنے کی پیمائش

The tape measure features a double-sided blade print, allowing for easy reading from various angles, including overhead measurements.

DEWALT ToughSeries tape measure showing double-sided blade for overhead measurements

Figure 5: The double-sided blade print facilitates overhead measurements.

دیکھ بھال

صفائی

  • Regularly wipe the blade and case with a clean, damp دھول اور ملبے کو دور کرنے کے لیے کپڑا۔
  • Avoid using harsh chemicals or abrasive cleaners, as these can damage the blade markings or case finish.
  • Ensure the blade is dry before fully retracting it into the case to prevent rust.

بیٹری کی دیکھ بھال

  • Recharge the battery when the LED light dims or fails to illuminate.
  • طویل مدتی اسٹوریج کے لیے، بیٹری کو تقریباً 50% چارج کریں اور ٹھنڈی، خشک جگہ پر اسٹور کریں۔

ذخیرہ

  • Store the tape measure in a dry environment, away from extreme temperatures.
  • The ToughSeries design provides a 100ft drop rating, but proper storage helps prolong the tool's lifespan.

خرابی کا سراغ لگانا

ایل ای ڈی لائٹ کام نہیں کر رہی

  • بیٹری لیول چیک کریں: The battery may be depleted. Connect the tape measure to a USB power source and allow it to charge for at least 30 minutes before attempting to use the LED again.
  • Ensure Proper Activation: Press the LED power button firmly.

Blade Does Not Retract Smoothly

  • بلیڈ صاف کریں: Dust, dirt, or debris on the blade can hinder retraction. Extend the blade fully and carefully wipe it clean with a damp کپڑا
  • رکاوٹوں کی جانچ کریں: Inspect the blade opening for any foreign objects that might be blocking the blade's path.

Slide Lock Not Engaging/Disengaging

  • صاف ملبہ: Ensure no debris is lodged around the slide lock mechanism.
  • مناسب آپریشن: Confirm you are pushing the slide lock fully forward to engage and fully backward to disengage.

وضاحتیں

فیچرتفصیلات
برانڈڈویلٹ
ماڈل نمبرDWHT35625S
بلیڈ کی لمبائی25 فٹ
پیمائش کی درستگی± 1/16 inches per 10 feet
لاک کی قسمسلائیڈ
کیس کا موادپلاسٹک یا دھاتی کھوٹ
بلیڈ کا موادسٹینلیس سٹیل
LED RuntimeUp to 3 hours continuous (with 60-second auto-off)
ڈراپ ریٹنگ100 فٹ

وارنٹی کی معلومات

DEWALT products are typically covered by a limited warranty. For specific warranty terms and conditions applicable to your region and product, please refer to the official DEWALT webسائٹ یا ان کے کسٹمر سپورٹ سے رابطہ کریں۔ وارنٹی کے دعووں کے لیے اپنی خریداری کا ثبوت رکھیں۔

کسٹمر سپورٹ

For technical assistance, replacement parts, or further inquiries regarding your DEWALT ToughSeries 25ft Illuminated Tape Measure (Model DWHT35625S), please visit the official DEWALT website or contact their customer service department. When contacting support, please have your model number (DWHT35625S) and purchase details readily available.

© 2023 ڈیوالٹ۔ جملہ حقوق محفوظ ہیں۔

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.