Pipishell Full Motion TV Wall Mount (Model PILF12)

تعارف

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Pipishell Full Motion TV Wall Mount, Model PILF12. Please read this manual thoroughly before installation and retain it for future reference.

اہم حفاظتی معلومات

انتباہ:

• Do not mount on drywall alone. This mount is designed for installation on 8", 12", or 16" wood studs, solid concrete, or brick walls.
• یقینی بنائیں کہ دیوار کی ساخت محفوظ طریقے سے ماؤنٹ اور آپ کے ٹی وی کے مشترکہ وزن کو سہارا دے سکتی ہے۔
• زیادہ سے زیادہ وزن کی گنجائش 132 پونڈ (60 کلوگرام) سے زیادہ نہ ہو۔
• Do not exceed the maximum VESA mounting pattern of 600x400mm.
• Always use appropriate safety equipment and tools during installation.
• اگر آپ کو انسٹالیشن کے عمل کے کسی بھی حصے کے بارے میں یقین نہیں ہے، تو کسی مستند پیشہ ور سے مشورہ کریں۔

مطابقت کی جانچ

Before proceeding with installation, verify that your TV and wall are compatible with this mount.

• ٹی وی کا سائز: Compatible with most 42-85 inch flat screen LED TVs.
• وزن کی صلاحیت: 132 پونڈ (60 کلوگرام) تک کے ٹی وی کو سپورٹ کرتا ہے۔
• VESA پیٹرن: Supports VESA mounting patterns from 200x100mm to 600x400mm.
• دیوار کی قسم: Suitable for 8", 12", or 16" wood studs, solid concrete, or brick walls. Not for drywall only.

Figure 1: Wall Type and VESA Compatibility. This image illustrates the compatible wall types (concrete, wood studs, brick) and specifies the VESA pattern range (Min: 200x100mm, Max: 600x400mm) and maximum stud spacing (16 inches). It explicitly warns against installing on drywall alone.

Figure 2: Pre-Purchase Checklist. This image provides a visual checklist of four key compatibility factors: wall stud spacing (16"/12"/8"), TV size (42"-85"), maximum load (132 lbs), and VESA pattern (Max: 600x400mm, Min: 200x100mm).

Figure 3: Steady TV Support. This image visually confirms the mount's robust construction, capable of supporting TVs up to 132 lbs, as indicated by the prominent '132LBS' graphic.

پیکیج کے مشمولات

Please check that all components are present and undamaged before installation. If any parts are missing or damaged, contact customer support.

پیکیج میں عام طور پر شامل ہیں:

• ٹی وی وال ماؤنٹ اسمبلی
• TV Brackets (x2)
• سوراخ کرنے والا سانچہ۔
• Standard Mounting Hardware (various screws, washers, spacers for TV and wall)
• بلبلے کی سطح
• کیبل ٹائیز

Figure 4: Mount and Accessories. This image displays the main TV wall mount unit along with a small bubble level and several cable ties, representing the typical contents of the package.

سیٹ اپ اور انسٹالیشن

Follow these steps carefully for a secure installation. It is recommended to have two people for certain steps, especially when handling the TV.

Step 1: Attach Brackets to Your TV

1. Carefully place your TV face-down on a soft, clean surface to prevent screen damage.
2. اپنے TV کے پچھلے حصے میں VESA بڑھتے ہوئے سوراخوں کی شناخت کریں۔
3. فراہم کردہ ہارڈویئر کٹ سے مناسب پیچ، واشر اور اسپیسر منتخب کریں جو آپ کے ٹی وی کے بڑھتے ہوئے سوراخوں میں فٹ ہوں۔
4. Attach the two vertical TV brackets to the back of your TV using the selected hardware. Ensure they are securely fastened but do not overtighten. The brackets should be centered horizontally on the TV.

Step 2: Mount Arm Assembly on Wall

1. Determine the desired height and location for your TV.
2. Use a stud finder to locate the edges of your wood studs (if applicable). Mark the center of the studs.
3. Position the drilling template on the wall at the desired height and level it using the included bubble level. Mark the drilling points.
4. Drill pilot holes at the marked locations. The size of the drill bit will depend on your wall type (refer to the detailed instructions in the package).
5. Securely attach the wall plate of the mount assembly to the wall using the appropriate lag bolts and washers. Ensure it is firmly anchored.

Figure 5: Easy Installation Overview. This image visually summarizes the three primary installation steps: 1. Attach brackets to your TV, 2. Mount arm assembly on the wall, and 3. Hang the TV on the arm assembly.

Figure 6: Mount Features. This image highlights key features of the mount, including the tool-free tilt mechanism, anti-drop edges for safety, security locks to hold the TV in place, and the robust design with 30% thicker arms for stability.

Step 3: Hang TV on the Arm Assembly

1. With assistance, carefully lift the TV with the attached brackets onto the wall plate.
2. Ensure the TV brackets hook securely onto the wall plate.
3. Engage the security locks on the bottom of the TV brackets to prevent accidental dislodgement.

پوسٹ انسٹالیشن لیولنگ

After the TV is mounted, you can make minor adjustments to ensure it is perfectly level.

• The mount allows for a +/-3° post-installation leveling adjustment.
• Refer to the specific mechanism on your mount (usually screws or knobs on the TV brackets) to adjust the level.

Figure 7: Post-Installation Leveling. This image illustrates how the TV can be adjusted by +/-3 degrees after installation to achieve a perfectly level viewپوزیشن.

آپریٹنگ اور ایڈجسٹمنٹ

Your Pipishell Full Motion TV Wall Mount offers various adjustments for optimal viewing

توسیع اور مراجعت

• Gently pull the TV away from the wall to extend the arms. The mount can extend from 2.79 inches to 16.54 inches from the wall.
• Push the TV back towards the wall to retract the arms.
• Ensure smooth movement and avoid sudden forceful actions.

کنڈا ایڈجسٹمنٹ

• The mount allows for a +/-45° swivel adjustment.
• Carefully pivot the TV horizontally to achieve your desired viewING زاویہ
• Enhanced hinges provide smooth flexibility during swivel adjustments.

Tool-Free Tilt

• The mount features a tool-free tilt mechanism, allowing for a +5°/-15° tilt.
• Adjust the tilt to reduce glare from windows or light sources and optimize your viewتجربہ ہے.
• Locate the friction gear or lever on the mount to adjust the tilt angle.

Figure 8: Extension and Tilt Features. This image demonstrates the mount's ability to extend up to 16.54 inches and retract to 2.79 inches. It also highlights the tool-free tilt function, allowing for adjustments between +5° and -15°.

Figure 9: Swivel for Comfortable Viewing. This image illustrates the mount's +/-45 degree swivel capability, allowing the TV to be angled for optimal viewing from different positions in a room. The inset shows an enhanced hinge for smooth motion.

دیکھ بھال

• وقتاً فوقتاً تمام پیچ اور کنکشن چیک کریں تاکہ یہ یقینی بنایا جا سکے کہ وہ سخت اور محفوظ رہیں۔
• نرم، خشک کپڑے سے پہاڑ کو صاف کریں۔ کھرچنے والے کلینر یا سالوینٹس سے پرہیز کریں۔
• Do not lubricate the moving parts unless specifically instructed by the manufacturer.

خرابی کا سراغ لگانا

وضاحتیں

وارنٹی اور سپورٹ

Pipishell is committed to ensuring your satisfaction. For any questions, concerns, or assistance with installation or product selection, please contact our U.S.-based customer support team.

Contact information for support is typically found on the product packaging or the official Pipishell webسائٹ