1. تعارف اور اوورview
This manual provides detailed instructions for the installation, operation, and maintenance of your INJORA Extended 4mm CNC Aluminum Front Axle. This high-quality upgrade component is specifically designed for 1/18 scale TRX4M Defender, Bronco, and K10 High Trail RC crawlers, enhancing their stability and climbing performance.
The axle features precision CNC machining and a durable black anodized finish, ensuring both performance and longevity for your RC vehicle.
2. مصنوعات کی خصوصیات
- اعلی معیار کی تعمیر: CNC machined aluminum with a black anodized finish for excellent durability and precision.
- Extended Design: +4mm extension on each side, resulting in an 8mm increase in total width for improved stability and enhanced climbing capabilities.
- مربوط اجزاء: Includes hardened CVD shafts, 12/24T steel gears, and 5mm (+1mm) brass hexes with wheel nuts.
- پہلے سے جڑا ہوا: Designed for simpler installation, arriving pre-assembled with all necessary hardware.
- مطابقت: Specifically engineered for TRX4M Defender, Bronco, and K10 High Trail 1/18 RC Crawlers.
3. پیکیج کے مشمولات
براہ کرم تصدیق کریں کہ پیکیج کھولنے پر تمام اشیاء موجود ہیں اور اچھی حالت میں ہیں:
- One (1) INJORA Extended 4mm CNC Aluminum Front Axle (Pre-assembled)
- Hardened CVD shafts (pre-installed)
- 12/24T steel gears (pre-installed)
- 5mm (+1mm) brass hexes
- وہیل گری دار میوے
- Assorted mounting hardware (screws, washers, etc.)
4. سیٹ اپ اور انسٹالیشن
4.1 حفاظتی احتیاطی تدابیر
- Always disconnect the battery from your RC vehicle before performing any maintenance or installation.
- Use appropriate tools to avoid damaging components.
- چھوٹے حصوں کو بچوں سے دور رکھیں۔
4.2 ٹولز درکار ہیں (شامل نہیں)
- چھوٹا فلپس ہیڈ سکریو ڈرایور
- Hex wrenches (various sizes, typically 1.5mm, 2.0mm)
- چمٹا (اختیاری)
4.3 تنصیب کے مراحل
- گاڑی تیار کریں: Place your TRX4M RC crawler on a stable surface. Disconnect the battery.
- Remove Original Axle: Carefully unbolt and remove the existing front axle assembly from your TRX4M chassis. Disconnect the steering links, drive shaft, and any other attached components.
- Unpack New Axle: Remove the INJORA Extended 4mm CNC Aluminum Front Axle from its packaging.
- Mount New Axle: Position the new axle onto the TRX4M chassis. Secure it using the provided mounting hardware. Ensure all screws are tightened appropriately, but do not overtighten.
- کنیکٹ اجزاء: Reconnect the drive shaft to the new axle. Attach your compatible steering links to the axle's steering knuckles.
- اہم مطابقت کا نوٹ: Due to the extended design of this axle, it is مطابقت نہیں رکھتا with the original TRX4M steering links and dogbone shafts. Ensure you are using compatible aftermarket steering links and drive shafts.
- پہیے انسٹال کریں: Attach your wheels using the provided brass hexes and wheel nuts.
- فائنل چیک: Verify that all connections are secure and that the steering and suspension move freely without binding.
تصویر 1: ختمview of the INJORA Extended 4mm CNC Aluminum Front Axle.
Image 2: The extended front axle installed on a 1/18 scale TRX4M RC crawler, showcasing its integration.
5. آپریٹنگ ہدایات
Once the INJORA Extended 4mm CNC Aluminum Front Axle is correctly installed, operate your TRX4M RC crawler as you normally would. The extended width provided by this axle will contribute to improved stability, especially during side-hilling and aggressive climbing maneuvers. You may notice enhanced control and a more planted feel during operation.
6 دیکھ بھال
Regular maintenance will ensure the longevity and optimal performance of your INJORA axle:
- معائنہ: Periodically inspect the axle for any signs of wear, damage, or loose components. Check the CVD shafts, gears, and bearings.
- صفائی: Keep the axle assembly clean from dirt, dust, and debris, especially after off-road use. A soft brush and compressed air can be effective.
- فاسٹینر چیک: Regularly check all screws and fasteners for tightness. Vibrations during operation can cause them to loosen over time.
- چکنا: Apply a small amount of appropriate RC-specific grease to the gears and moving parts as needed to reduce friction and wear.
Image 3: Close-up of the axle showing the bearing and hex, critical areas for inspection and lubrication.
تصویر 4: تفصیلی view of the CVD joint, which should be regularly checked for smooth operation and wear.
7 خرابیوں کا سراغ لگانا
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| Axle not fitting correctly or binding | Incompatible steering links or drive shafts; incorrect installation. | Ensure you are using aftermarket steering links and drive shafts compatible with extended axles. Recheck all mounting points and ensure no components are obstructing movement. |
| Excessive play or noise from axle | Loose fasteners; worn gears or bearings; lack of lubrication. | Tighten all screws and fasteners. Inspect gears and bearings for wear and replace if necessary. Apply appropriate RC lubricant to gears and moving parts. |
| Reduced performance or sluggish movement | Debris in axle housing; worn components. | Clean the axle assembly thoroughly. Inspect for worn parts and replace as needed. |
8. وضاحتیں
- ماڈل نمبر: 4M-61FR-1
- مواد: CNC مشینی ایلومینیم
- رنگ: سیاہ انودائزڈ
- Axle Extension: +4mm per side (8mm total width increase)
- شامل اجزاء: Hardened CVD shafts, 12/24T steel gears (12/24T), 5mm (+1mm) brass hexes, wheel nuts
- مطابقت: TRX4M Defender, Bronco, K10 High Trail 1/18 RC Crawler
- پروڈکٹ کے طول و عرض (L x W x H): 13 x 8 x 4 سینٹی میٹر
- پروڈکٹ وزن: 45 گرام
تصویر 5: اوپر view of the extended front axle, highlighting its overall structure and design.
تصویر 6: سامنے view of the extended front axle, showing the differential housing and mounting points.
9. وارنٹی اور سپورٹ
For information regarding product warranty, returns, or technical assistance, please refer to the INJORA official website or contact the retailer from whom you purchased this product. Please have your product model number (4M-61FR-1) and proof of purchase ready when contacting support.