JZAQ A13 Dual Pack Bluetooth Motorcycle Intercom Headset User Manual

1. تعارف

Thank you for choosing the JZAQ A13 Dual Pack Bluetooth Motorcycle Intercom Headset. This manual provides comprehensive instructions for the proper installation, operation, and maintenance of your device. Please read this manual carefully before use to ensure optimal performance and safety. This device is designed to provide clear communication and entertainment for two riders during various activities such as motorcycling, skiing, and cycling.

2. پیکیج کے مشمولات

The JZAQ A13 Dual Pack includes the following items:

• 2 x Helmet Intercom Headsets (JZAQ A13 Main Unit)
• 2 x Microphones (Hard earbud type)
• 2 x Soft Earbuds (for alternative helmet types)
• 6 x Velcro Headphone Pads
• 2 x USB Type-C چارجنگ کیبلز
• 2 x Clip Bases
• 2 x Paste Bases
• 1 ایکس صارف دستی

Image: Contents of the JZAQ A13 Dual Pack, showing all included accessories for two intercom units.

3. پروڈکٹ ختمview

The JZAQ A13 intercom features an ultra-thin speaker design for comfort and a robust main unit with intuitive controls. It is designed for seamless integration into various helmet types.

3.1 Ultra-thin Speaker Design

The earphone speakers are only 10mm thick, ensuring they do not cause discomfort or pressure on your ears, even during long rides.

Image: The JZAQ A13 intercom unit, emphasizing its slim profile for comfortable helmet fit.

3.2 بٹن کے افعال

Familiarize yourself with the buttons on the main unit for easy operation:

تصویر: تفصیلی view of the JZAQ A13 intercom's buttons and their corresponding functions.

• Power On/Off / Pause/Play / Connect Button (Large Round Button): پاور آن/آف کرنے کے لیے دبائیں اور تھامیں۔ موسیقی چلانے/روکنے یا کالز کا جواب دینے/ختم کرنے کے لیے مختصر دبائیں۔
• Volume Up / Next Song Button (+): Short press to increase volume. Long press to skip to the next song.
• Volume Down / Previous Song / Voice Assistant Button (-): Short press to decrease volume. Long press to go to the previous song. Double-click to activate the voice assistant (Siri/Google Assistant).
• Charging Port (USB Type-C): Located on the side for connecting the charging cable.
• ہیڈ فون جیک: For connecting the microphone and speaker assembly.

4. تنصیب

Follow these steps to install the JZAQ A13 intercom system into your helmet:

1. بڑھتے ہوئے مقام کا انتخاب کریں: Select a flat surface on the left side of your helmet for the main intercom unit.
2. ماؤنٹنگ بیس منسلک کریں:
   • کلپ کی بنیاد: Slide the clip base between the helmet shell and the inner padding. Ensure it is securely fastened.
   • Paste Base: Clean the chosen helmet surface thoroughly. Peel off the adhesive backing from the paste base and firmly press it onto the helmet for at least 30 seconds. Allow 24 hours for the adhesive to cure before attaching the intercom unit.
3. ماؤنٹ مین یونٹ: Slide the JZAQ A13 main unit onto the installed mounting base until it clicks into place.
4. اسپیکرز انسٹال کریں: Attach the velcro pads to the back of the speakers. Place the speakers inside the helmet's ear pockets, ensuring they are centered over your ears for optimal sound.
5. مائیکروفون انسٹال کریں: Attach the microphone to the inside of the helmet, positioning it close to your mouth but out of the way of your vision. Use the hard earbud microphone for open-face helmets and the soft earbud microphone for full-face helmets.
6. کیبلز کو جوڑیں: Plug the speaker and microphone cable into the headphone jack on the main intercom unit. Route the cables neatly under the helmet padding to avoid obstruction.

5. سیٹ اپ

5.1 ڈیوائس کو چارج کرنا

Before first use, fully charge the intercom unit.

• Connect the USB Type-C charging cable to the charging port on the intercom unit and to a USB power source (e.g., computer, wall adapter).
• چارج کرنے کا وقت تقریباً 2-3 گھنٹے ہے۔
• The device supports charging voltage of USB 5V1A-2A.
• A red indicator light typically shows charging in progress, turning off or changing color when fully charged.

Image: Representation of the JZAQ A13's 1500mAh battery, providing up to 180 hours of continuous play.

5.2 پاور آن/آف

• پاور آن: Press and hold the large round Power On/Off button for approximately 3 seconds until you hear an audible prompt and the indicator light flashes.
• بجلی بند: Press and hold the large round Power On/Off button for approximately 3 seconds until you hear an audible prompt and the indicator light turns off.

5.3 بلوٹوتھ فون کے ساتھ جوڑا

To connect your JZAQ A13 to your smartphone:

1. Ensure the intercom is powered off.
2. Press and hold the large round Power On/Off button for about 5-7 seconds until the indicator light flashes red and blue alternately, indicating pairing mode.
3. اپنے اسمارٹ فون پر، بلوٹوتھ کی ترتیبات پر جائیں اور نئے آلات تلاش کریں۔
4. Select "A13" from the list of available devices.
5. ایک بار جوڑا بننے کے بعد، اشارے کی روشنی نیلی آہستہ آہستہ چمکے گی، اور آپ کو ایک تصدیقی لہجہ سنائی دے گا۔

5.4 انٹرکام پیئرنگ (دو سوار)

The JZAQ A13 supports two-way intercom communication between two riders within a range of 200 meters. For optimal performance, ensure both units are fully charged.

Image: Visual representation of the JZAQ A13's two-way intercom capability, supporting communication between riders up to 800 meters apart (note: 2-rider intercom is 200m).

1. Ensure both A13 units are powered off.
2. On both units, press and hold the large round Power On/Off button for approximately 5-7 seconds until both units enter pairing mode (red and blue lights flashing alternately).
3. On one of the units, short press the large round Power On/Off button. The units will search for each other.
4. Once connected, the indicator lights on both units will flash blue slowly, and you will hear a confirmation tone.
5. To initiate intercom communication, short press the large round Power On/Off button on either unit. To end intercom, short press it again.

6. آپریٹنگ ہدایات

6.1 میوزک پلے بیک

After pairing with your phone, you can enjoy stereo music with noise reduction technology.

Image: The JZAQ A13 intercom unit, illustrating its capability for clear music playback through noise reduction technology.

• چلائیں/روکیں: Short press the large round Power On/Off button.
• اواز بڑھایں: '+' بٹن کو مختصر دبائیں۔
• آواز کم: '-' بٹن کو مختصر دبائیں۔
• اگلا گانا: '+' بٹن کو دیر تک دبائیں۔
• پچھلا گانا: '-' بٹن کو دیر تک دبائیں۔

6.2 فون کالز

The JZAQ A13 supports automatic answering and clear voice calls.

• کال کا جواب دیں: The device will automatically answer incoming calls after a few rings. You can also short press the large round Power On/Off button to answer manually.
• کال ختم کریں: Short press the large round Power On/Off button.
• کال مسترد کریں: Long press the large round Power On/Off button during an incoming call.
• آخری نمبر دوبارہ ڈائل کریں: Double-click the large round Power On/Off button.

6.3 وائس اسسٹنٹ

Activate your smartphone's voice assistant (Siri or Google Assistant) directly from the intercom.

• متحرک صوتی معاون: Double-click the '-' (Volume Down) button.

6.4 انٹرکام کمیونیکیشن

Once two units are paired for intercom, you can initiate communication:

• انٹرکام شروع کریں: Short press the large round Power On/Off button on either unit.
• انٹرکام ختم کریں: Short press the large round Power On/Off button again.

7 دیکھ بھال

To ensure the longevity and optimal performance of your JZAQ A13 intercom, follow these maintenance guidelines:

• صفائی: یونٹ کو ایک نرم کے ساتھ مسح کریں، ڈیamp کپڑا سخت کیمیکل یا کھرچنے والے کلینر کا استعمال نہ کریں۔
• پانی کی مزاحمت: The device is IP67 rated, meaning it is protected against dust and can withstand immersion in water up to 1 meter for 30 minutes. It is suitable for use in rainy and snowy conditions. However, avoid prolonged submersion or high-pressure water jets.

Image: The JZAQ A13 intercom unit shown underwater, highlighting its IP67 deep waterproof capability for use in wet conditions.

• ذخیرہ: استعمال میں نہ ہونے پر آلہ کو ٹھنڈی، خشک جگہ پر اسٹور کریں۔ انتہائی درجہ حرارت سے پرہیز کریں۔
• بیٹری کی دیکھ بھال: طویل مدتی اسٹوریج کے لیے، گہری خارج ہونے سے بچنے کے لیے ہر چند ماہ بعد بیٹری کو تقریباً 50% چارج کریں۔

8 خرابیوں کا سراغ لگانا

If you encounter issues with your JZAQ A13 intercom, refer to the following common problems and solutions:

• کوئی طاقت نہیں:
  • Ensure the battery is charged. Connect the unit to a charger and check for the charging indicator light.
  • Press and hold the Power On/Off button for the required duration (3 seconds).
• فون کے ساتھ جوڑا نہیں بنایا جا سکتا:
  • Ensure the intercom is in pairing mode (red and blue lights flashing alternately).
  • Make sure Bluetooth is enabled on your phone and it is discoverable.
  • Try restarting both the intercom and your phone.
  • Clear previous Bluetooth connections on your phone if you have too many.
• انٹرکام کنیکٹ نہیں ہو رہا ہے:
  • Ensure both units are in intercom pairing mode (red and blue lights flashing alternately) before initiating connection.
  • Make sure the distance between the two units is within the effective range (200 meters).
  • Try resetting both units and repeating the intercom pairing process.
• کوئی آواز یا کم والیوم نہیں:
  • Check the volume level on both the intercom and your connected phone.
  • Ensure the speaker and microphone cables are securely connected to the main unit.
  • اس بات کی توثیق کریں کہ اسپیکر ہیلمٹ کے اندر آپ کے کانوں کے اوپر صحیح طریقے سے لگائے گئے ہیں۔
• وائس اسسٹنٹ جواب نہیں دے رہا ہے:
  • Ensure your phone's voice assistant (Siri/Google Assistant) is enabled and configured.
  • Confirm the intercom is properly paired with your phone.
  • Double-click the '-' button firmly and quickly.

9. وضاحتیں

10. وارنٹی اور سپورٹ

The JZAQ A13 Bluetooth Motorcycle Intercom Headset comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product meets its specified performance standards under normal use.

For any technical assistance, troubleshooting, or warranty claims, please contact customer service through the Amazon Buyer Center. Our support team is available for 12 hours to assist you with any issues you may encounter.

وارنٹی کی توثیق کے لیے براہ کرم اپنی خریداری کا ثبوت اپنے پاس رکھیں۔